WARNING!! Furniture Tipping Risk. Serious risk of severe or fatal crush injuries can occur from furniture tipping over if not secured. Children like to climb on furniture and Unsecured furniture can pose a serious danger. Please follow all instructions and install the tip-over restraints provided. In addition to installing the restraints, to help prevent tip-over: 1. Place heaviest items in the lowest drawers; 2.
Label Picture Description QTY A Upper Left Side Panel 1 B Immovable Shelf Panel 1 C Upper Right side Panel 1 D Top Panel 1 E Lower Left Side Panel 1 F Cabinet Top Panel 1 G Door Panel 1 H Bottom Panel 1 Noble house Home Furnishings LLC 2
I Bottom Base 1 J Lower Right Side Panel 1 K Upper Back Panel 1 L Plastic Bar 1 M Lower Back Panel 1 N Upper Shelf Panel 1 O Cabinet Shelf Panel 1 Description QTY Dowel (6X30mm) 21 Label Picture ① Noble house Home Furnishings LLC 3
② Screw (M2.
⑬ Cam Bolt (M6X40mm) 5 ⑭ Cam Lock (M10X10mm) 5 ⑮ Screwdriver (Not Provided) 1 ⑯ Pad 5 ⑰ Cover 5 ⑱ Screw (M4x40mm) 3 ⑲ Wall Anchor 3 ⑳ Hammer (Not Provided) 1 ㉑ Power Drill (Not Provided) 1 Restraint Device Hardware Noble house Home Furnishings LLC 5
㉒ Screw (M3x14mm) 3 ㉓ Restraint Strap 3 Before Beginning Assembly: 2 9 3 Noble house Home Furnishings LLC *21 *17 3 3 *5 *5 3 6
Overview Top Panel(D) Immovable Shelf Panel(B) Upper Shelf Pane(N) Upper Right side Panel(C) Upper Left Side Panel(A) Cabinet Top Panel(F) Lower Left Side Panel(E) Bottom Base(I) Door Panel(G) FRONT FACING This Cabinet has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Cabinet parts, the above picture is to help you put the various parts into perspective.
Step 2 2.1 2.2 ⑮ ⑮ ⑮ ⑮ 2.1) Attach Cam Bolt(⑪) to the Upper Left Side Panel(A) Using Screwdriver(⑮) as shown. 2.2) Attach Cam Bolt(⑪) to Right Side Panel(C) Using Screwdriver(⑮) as shown. Step 3 3.1 3.2 ⑮ ⑮ ⑨ ⑨ 3.1)Attach Cam Bolt(⑪)to Top Panel(D) Using Screwdriver(⑮) as shown. Insert Dowel(①) into the mounting positions on Top Panel(D). 3.2) Attach Magnetic Bar(⑧) to the Door Panel(G) Using Screw(⑦) with Screwdriver(⑮) as shown.
Step 4 ⑮ ⑮ ⑮ ⑮ Attach Upper Left Side Panel(A) to the Cam Bolt and Dowel on Top Panel(D), then insert the Cam Nut(⑫) into the mounting positions Upper Left Side Panel(A), lock by Cam Nut(⑫) with Screwdriver(⑮). Attach Immovable Shelf Panel(B) to the Cam Bolt on Upper Left Side Panel(A), lock by Cam Nut(⑫) with Screwdriver(⑮). Step 5 Attach Upper Right Side Panel(C) to the Top Panel(D) and Immovable Shelf Panel(B), lock by Cam Nut(⑫) with Screwdriver(⑮).
Step 6 6.1 6.2 ⑮ ⑮ 6.1) Insert Dowel(①) into the mounting positions on Lower Left Side Panel(E), attach Cam Bolt(⑪) to the Lower Left Side Panel(E) using Screwdriver(⑮). Insert Cam Lock(⑭) into the mounting positions on Lowe Left Side Panel(E). 6.2) Insert Dowel(①) into the mounting positions on Lower Right Side Panel(J), attach Cam Bolt(⑪) to the Lower Right Side Panel(J) using Screwdriver(⑮). Insert Cam Lock(⑭) into the mounting positions on Lower Right Side Panel(J) . Step 7 7.2 7.
Step 8 Insert Iron Shaft on the Door Panel(G) into the mounting positions on Cabinet Top Panel(F) and Bottom Panel(H), then attach Bottom Base(I) to the dowel on Lower Left Side Panel(E). Step 9 ⑮ ⑮ ⑮ Attach Lower Right Side Panel(J) to the mounting positions on Cabinet Top Panel(F) and Bottom Panel(H),then open the Door Panel(G), insert Cam Nut(⑫) into the mounting positions on Cabinet Top Panel(F) and Bottom Panel(H), lock by turning Screwdriver(⑮).
Step10 ⑮ Insert Dowel(①) into Lower Right Side Panel(J) and Lower Left Side Panel(E) as shown, attach Cam Bolt(⑬) to the Lower Right Side Panel(J) and Lower Left Side Panel(E), lock by turning Screwdriver(⑮). Step11 J ⑮ Attach Upper Left Side Panel(A) and Upper Right Side Panel(C) to the Cam Bolt and Dowel on Lower Right Side Panel(J) and Lower Left Side Panel(E), locked by Cam Nut(⑫) with Screwdriver(⑮) as shown.
Step12 ⑮ ⑮ ⑮ ⑮ ⑮ ⑮ ⑮ ⑮ ⑮ Attach Upper Back Panel(K),Plastic Bar(L) and Lower Back Panel(M) to the back of Cabinet using Screw(②) with Screwdriver(⑮).
Insert Shelf Support(⑩) into the mounting positions inside of Upper Left Side Panel(A), Upper Right Side Panel(C), Lower Left Side Panel(E) and Lower Right Side Panel(J), Place Upper Shelf Panel(N) onto the Shelf Support(⑩) on Upper Left Side Panel(A) and Upper Right Side Panel(C).Place Cabinet Shelf Panel(O) onto the Shelf Support(⑩) on Lower Left Side Panel(E) and Lower Right Side Panel(J). Peel a Pad(⑯) off the backing and apply it squarely to a leg as shown in the picture.
Step 14 ⑮ Attach Restraint Strap(㉓) to the Upper Back Panel(K) using Screw(㉒) with Screwdriver(⑮). Step 15 15.2 15.1 ⑮ ⑲ 15.1) Drill two mounting positions on the wall with Power Drill(㉑),insert Wall Anchor(⑲) into drilled mounting positions on the wall with Hammer(⑳) 15.2) Move the cabinet back to the wall, lock by Screw(⑱) with Screwdriver(⑮).
Noble house Home Furnishings LLC 16