WARNING!! Children have died from furniture tipover. Tip restraints have been included with this product; you must install the tip restraints according to these instructions in order to minimize the risk of furniture tipping. If you have any questions about this product or the tip restraint, please send us an email at tip_restraint_help@Noblehousefurniture.com NEVER allow children to climb or hang on furniture, including drawers or cabinet doors.
Caution : You must read this before you proceed TV CABINET Label Picture Description QTY A Top Panel 1 B Left Side Panel 1 C Right Side Panel 1 Noble house Home Furnishings LLC Page 2 OF 19
D Center Panel 1 E Door Panel 1 F Inner Top Panel 1 G Inner Bottom Panel 1 H Inner Side Left & Center Panel 2 I Inner Side Right Panel 1 J Shelf Panel 1 K Back Panel 1 L Bottom Panel 1 M Handle 1 N Leg 4 Noble house Home Furnishings LLC Page 3 OF 19
O Middle Leg 1 Description QTY ① Cam Lock 7 ② Cam Bolt 7 ③ Cam Cap 7 Label Picture ④ ⑤ ⑥ Positioning Dowel (Ø8*30mm) Positioning Dowel (Ø6*30mm) Cap Wood Screw (M6*50mm) 13 13 7 ⑦ Screw (M4*38mm) 13 ⑧ Screw (M3.
⑩ Nail 26 ⑪ Connector 2 ⑫ Stopper 1 ⑬ Shelf Support 5 ⑭ Screw (M4*25mm) 5 ⑮ ⑯ ⑰ Noble house Home Furnishings LLC Screwdriver (not provided) Hammer (not provided) Power Drill (not provided) 1 1 1 Page 5 OF 19
10" Air Press Pull Rod ⑱ Ball Connector 1 ⑲ Ball Connector Bracket 1 ⑳ Shock Absorber 1 Cabinet Restraint Device Hardware ㉑ Metal Bracket 4 ㉒ Wall Plug 2 ㉓ Wall Plug Screw 2 ㉔ Pan Head Screw 2 ㉕ Cabinet Restraint Strap 2 Noble house Home Furnishings LLC Page 6 OF 19
Before Beginning Assembly: X7 X7 X 13 X 13 X2 X 13 A X7 X7 X 34 X1 X 26 X2 F K B J H D H I C X1 X5 G E X1 L X1 Noble house Home Furnishings LLC X4 X5 X1 X1 X1 X1 Page 7 OF 19
Overview Back Panel (K) Top Panel (A) Inner Top Panel (F) Shelf Panel (J) Handle (M) Inner Side Right Panel (I) Left Side Panel (B) Right Side Panel (C) Inner Side L&Ctr Panel (H) Inner Side L&Ctr Panel (H) Door Panel (E) Inner Bottom Panel (G) Center Panel (D) Leg (N) Middle Leg (O) FRONT FACING Bottom Panel (L) This TV Cabinet has multiple parts and may require up to 60 minutes to assemble.
Step 2 2.1 ① 2.2 ④ ④ ④ ④ ① ① B ① ① ④ ④ ④ C ④ ① ④ ① ④ D ④ ④ 2.1) Insert Cam Locks(①) into mounting positions on Left Side Panel(B) by hand. 2.2) Insert Positioning Dowel(④) into mounting positions on Left Side Panel(B) by hand. 2.3) Repeat the same process on the Right Side Panel(C) and Center Panel(D). Step 3 3.1 ④ A D ① 3.3 ③ ① ② ⑮ C 3.2 Arrow A ① D NOTE ① B ④ ② Cam Bolt Mounting Position 3.
Step 4 C 4.1 4.2 ⑥ ⑨ ④ C D A L L B 4.1) Insert Positioning Dowels(④) from Left Side Panel(B), Right Side Panel(C) and Center Panel(D) into mounting positions on Bottom Panel(L). 4.2) Attach Bottom Panel(L) to Left Side Panel(B) Right Side Panel(C) and Center Panel(D) using Cap Wood Screws(⑥) with Allen Key(⑨). Step 5 CAUTION ⑯ ⑩ K L B NOTE ⑩ ⑩ ⑩ Attach Back Panel(K) to TV Cabinet Assembly using Nails(⑩) with Hammer(⑯).
Step 6 N ⑧ ⑧ ⑮ ⑧ ⑧ K L ⑧ O ⑮ B ⑧ ⑧ Attach Legs(N) and Middle Leg(O) to Bottom Panel(L) using Screws(⑧) with Screwdriver(⑮). Tighten the Screws fully in a sequential manner. Caution: Leg(N) should be facing outwards. Misassembly and reassembly may cause damage and instability to the product. Note: There are pre-existing mounting positions on the Bottom Panel to attach the Legs and Middle Leg.
Step 9 I ⑦ F H ⑮ H Attach Inner Top Panel (F) to Inner Side Left & Center Panel(H) using Screws(⑦) with Screwdriver(⑮). Step 10 I F H ⑦ G H ⑮ Attach Inner Bottom Panel(G) to H Inner Side Left & Center Panel(H) and Inner Side Right Panel(I) using Screws(⑦) with Screwdriver(⑮). Step 11 B A L H F ⑭ H ⑮ C H Flip the Whole TV Cabinet. Attach the Rack to the TV Cabinet using Screws(⑭) with Screwdriver(⑮). Step 12 B K L A H G H C H ⑬ Flip the Whole TV Cabinet over.
Step 13 B A H I L NOTE J G H J C ⑬ Put Shelf Panels(J) in place on Shelf Supports(⑬). Note: There are lead mounting positions on Shelf Panels(J) to fit Metal Shelf Supports(⑬). Step 14 M ⑭ ⑭ E ⑭ ⑮ ⑮ Attach Handle(M) to Door Panel(E) using Screws(⑭) with Screwdriver(⑮). Tighten the Screws fully in a sequential manner. Note: There are pre-existing mounting positions on the Door Panel to attach the Handle.
Step 16 ⑮ ⑧ ⑮ ⑧ E ⑪ ⑪ ⑪ Attach Connectors(⑪) to Door Panels(E) using Screws(⑧) with Screwdriver(⑮). Tighten the Screws fully in a sequential manner. Note: There are pre-existing mounting positions on both Door Panels to fix Connectors. Step 17 17.3 ⑮ ⑧ ⑮ 17.1 ⑧ B A L ⑬ E 17.2 J G H C ⑪ 17.1) Attach Connectors(⑪) to Bottom Panel(L) using Screws(⑧) with Screwdriver(⑮). Tighten the Screws fully in a sequential manner. 17.
Step 18 ⑧ ⑱ ⑮ B A L ⑧⑧ J G E H C Attach Ball Connector(⑱) to Left Side Panel(B) using Screws(⑧) with Screwdriver(⑮). Tighten the Screws fully in a sequential manner. Step 19 ⑱ ⑳ 19.1 B A L 19.2 E ⑲ J G H C ⑳ 19.1) Insert Ball Connectors(⑱) from Left Side Panel(B) into Shock Absorbers(⑳) by hand. 19.2) Insert Ball Connector Brackets(⑲) from Door Panels(E) into Shock Absorbers(⑳) by hand.
! WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Cabinet Restraint Device: To secure the TV Cabinet against the wall, attach two Metal Brackets(㉑) on the wall and the product, use the Cabinet Restraint Strap(㉕) to connect the Metal Brackets(㉑). Instructions: Step 20 20.2 ㉑ ㉑ K ⑮ ㉔ ㉑ 20.
Step 21 ㉒ 22.1 21.2 ⑰ ㉒ ㉒ ⑯ 21.1) Drill two holes on wall at same height as Metal Brackets(㉑) on TV Cabinet with Power Drill(⑰). You can mark these points in two ways as below: 1) Move the TV Cabinet back to the wall. Mark two points same height as TV Cabinet on the wall. Note: The Metal Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
Step 23 ㉕ ㉕ ㉕ ㉑ ㉑ Move TV Cabinet to the wall. Pull the Restraint Straps(㉕) through the Metal Brackets(㉑) on the wall and TV Cabinet one by one, and pull the Restraint Straps(㉕) tight. Step 24 Your TV Cabinet is ready for use. This TV Cabinet can only be used on a flat, level surface.
Noble house Home Furnishings LLC Page 19 OF 19