Instructions / Assembly

ManualsBrandsNoble House ManualsDesks51 in. Rectangular Natural Writing Desk

Noble House Home Furnishings LLC Page 1 of 7

CAUTION : This Table is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Table and to prevent damage to the Table, 02 persons

may be needed to execute this action.

Noble House Home Furnishings LLC Page 1 of 7

TABLE

CAUTION: You must read this before you proceed.

Please look in the Leg Panel for hardware packs.

Summary of content (7 pages)

PAGE 1
CAUTION: You must read this before you proceed. Please look in the Leg Panel for hardware packs. TABLE CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Table and to prevent damage to the Table, 02 persons may be needed to execute this action.
PAGE 2
Description Qty A Table Top 1 B Horizontal Support Bar 1 C Leg Panel 2 D Support Bar 2 Description Qty Long Screws (M6 x 80mm) 3 Short Screws (M6 x 50mm) 7 Allen Key 1 No. No.
PAGE 3
Table Top (A) Leg Panels (C) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 Attach the Horizontal support bar (B) with the Leg (C) as shown in picture. Then affix the Horizontal support bar (B) with the Leg (C) by Long screws (j) and Allen key (l). CAUTION: DO NOT FULLY TIGHTEN THE SCREWS. Step 3 Repeat same process as Step 2 to attach the Horizontal support bar (B) with another Leg (C) as shown in picture. CAUTION: DO NOT FULLY TIGHTEN THE SCREWS.
PAGE 5
Step 4 4.2 4.3 Step 4.1: Place the assembled frame face skywards onto a clean, soft surface to avoid any scratches or damages to the product. Then attach the Support bar (D) into assembled frame as shown in picture. Step 4.2: Affix the Support bar (D) with the Horizontal support bar (B) by using Short screws (k) and Allen key (l). Step 4.3: Affix the Support bar (D) with the Leg (C) by using Short screws (k) and Allen key (l). CAUTION: DO NOT FULLY TIGHTEN THE SCREWS.
PAGE 6
Step 6 Turn the leg frame right side up. Place the Table top (A) onto the Glass sticker pre-fixed on Leg frame as shown in picture. Proceed to tighten all the screws sequentially. Ensure all screws are fully locked into position. The Table is ready to be used. Caution: This Table can only be used on a flat, level surface.
PAGE 7
- - Noble House Home Furnishings LLC Page 7 of 7