Caution : You must read this before you proceed Please look in small carton for hardware packs and legs.
Label Picture Description QTY ① Allen Key 1 ② Bolt (M6*16mm) 13 ③ Washer 13 ④ Spring Washer 13 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 5
Overview Chair Body (C) Hind Leg (A) Front Leg (B) FRONT FACING This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Place the Chair Seat(C) upside down on the edge of a clean Table Top.
Step 2 Attach Hind Leg(A) to Chair Seat(C) using Bolts(②), Washers(③), and Spring Washers(④), with Allen Key(①) as pictured above. Repeat this same process to attach the another Hind Leg(A) to Chair Seat(C). Do not fully tighten the Bolts. Step 3 Stand the Chair up and place on flat, level surface. Carefully and gently sit onto the Chair. This will help properly align all parts at all joints and remove any gaps. Carefully get off the Chair and gently turn it over.
Cabinet Restraint Device Installation Instructions Care & Maintenance Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only .
