Assembly Instructions Caution: You must read this before you proceed Please look in the magic tape pouch for hardware packs and legs SOFA Noble House Home Furnishings LLC Page 1 OF 11
Part List Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat 1 E Front Rail 1 F Left Back Cushion 1 G Middle Back Cushion 1 H Right Back Cushion 1 I Seat Cushion 3 Noble House Home Furnishings LLC Page 2 OF 11
J Front Leg 2 K Back Leg 2 L Middle Leg 1 Description QTY ① Plastic Washer 8 ② Silicon Washer 2 ③ Allen Wrench 1 Hardware List Label Picture Assembly Preparation Before Beginning Assembly: X1 Noble House Home Furnishings LLC X1 X1 Page 3 OF 11
X2 X3 X2 X1 X8 X2 X1 Assembly Steps OVERVIEW Left Back Cushion(F) Middle Back Cushion(G) Right Back Cushion(H) Left Armrest(B) Right Armrest(C) Back Leg(K) Seat Cushion(I) Front Rail(E) Front Leg(J) FRONT FACING This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective.
Step 1 Left Armrest(B) ③ Open the carton and place all parts on a clean non-marring surface. Loosen the 3 bolts in the Left Armrest(B) around half an inch using the Allen Wrench(③). Repeat the same step to loosen the 3 bolts in the Right Armrest(C). Step 2 Right Armrest(C) Front Rail(E) Left Armrest(B) With the assistance of your adult partner, slide the hooks on each end of the Front Rail(E) into the bolts on the Left Armrest(B) and the Right Armrest(C), as shown above.
Step 3 Left Armrest(B) Right Armrest(C) Seat (D) Front Rail(E) With the assistance of your adult partner, lift the rope on the two sides of the Seat(D) by hand. Put the Seat(D) on the wood bar of the Front Rail(E) and then place it down slowly as shown above. Note:All the u-shaped metal clips need to be clamped onto the bolts.
Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B) and the Right Armrest(C) as shown in the picture. Note: Make sure the Tapered Connectors on the Backrest(A) lock into the Tapered Connectors on the Left Armrest(B) and the Right Armrest(C). Assistance from an adult partner is necessary for this assembly process. During this assembly process - do exercise caution.
Step 6 Right Armrest(C) Left Armrest(B) Back Leg(K) ② ① Attach the Back Leg(K) to the Left Armrest(B) using a Plastic Washer(①) and a Silicon Washer(②) turning clockwise until tight. Repeat the same step with the remaining Back Leg(K). Note: The use of Plastic Washers(①) are OPTIONAL and are especially useful to help alleviate slight wobbleness. Some Legs may need more than one Plastic Washer(①) whilst some Legs may not need any.
Install the Front Leg(J) to the Left Armrest(B) using a Plastic Washer(①) turning clockwise until tight. Repeat the same step with the remaining Front Leg(J). Note: The use of Plastic Washers(①) are OPTIONAL and are especially useful to help alleviate slight wobbleness. Some Legs may need more than one Plastic Washer(①) whilst some Legs may not need any. Step 8 Backrest(A) Middle Leg(L) ① Attach the Middle Leg(L) to the Backrest(A) using a Plastic Washer(①) turning clockwise until tight.
Step 10 Seat Cushion(I) Put the Seat Cushions(I)on the sofa. Step 11 Left Back Cushion(F) Middle Back Cushion(G) Right Back Cushion(H) Put the Left Back Cushion(F),Middle Back Cushion(G) and Right Back Cushion(H) on the sofa. Step 12 Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 11 OF 11