Assembly Instructions Caution: You must read this before you proceed Please look in the seat for hardware packs and legs.
B Left Back Cushion Cover 1 C Right Back Cushion Cover 1 D Left Back Cushion 1 E Right Back Cushion 1 F Right Backrest 1 G Left Backrest 1 H Wooden Leg (with Plastic Gasket) 6 Description QTY Plastic Gasket 3 Hardware Label Picture ① Noble house Home Furnishings LLC Page 2 OF 10
② Bolt(M6*70mm) 9 ③ Spring Washer 9 ④ Washer 9 ⑤ Allen Key 1 Assembly Preparation Before Begining Assembly: Noble house Home Furnishings LLC Page 3 OF 10
Assembly Steps Right Back Cushion(C+E) Left Back Cushion(B+D) Left Backrest(G) Right Backrest(F) Wooden Leg(H) Seat Base(A) FRONT FACING This Chaise has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Chaise parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Open the carton and take out the Small Box, the two sealed Bags, the Left Back Cushion Cover(B), the Right Back Cushion Cover(C), the Right Backrest(F) and the Left Backrest(G) from the bottom of the Seat Base(A). Then open the Small Box to take out the Wooden Legs(H) and Hardware. Step 2 D E B C Open the Vacuum Bags to take out the Left Back Cushion(D) and Right Back Cushion(E).
Align the mounting bracket on the Left side of the Right Backrest(F) with the one on the right side of Left Backrest(G), Then slide the Right Backrest(F) downwards, pressing gently but firmly downwards until they lock into place. Step 4 Turn the Seat Base(A) on its side on the floor as shown in the picture. Step 5 G F Put the Left Backrest(G) and Right Backrest(F) on the Seat Base(A) as the picture indicates and and make sure the bottoms are at the same level.
Step 6 ② ④ ⑤ ③ G F A Insert the Bolts(②) inside half as pictured until 8 Bolts each side are all Bolted in, then you can tight all the bolts with Allen Key(⑤).
With assistance from your adult partner, place the whole product on a clean, nonmarring surface. Then attach using Bolts(②), Spring Washers(③) and Washers(④) with the Allen Key(⑤). Please don't tighten the Bolts cmpletely, just half-way until all bolts are in,then tighten all the Bolts with the Allen Key(⑤). Note: The bottom of the Seat Base(A),Left Backrest(G) and Right Backrest(F) must be at the same level before assembly.
Step 8 Don't turn the Chaise over directly, you need to lift the Chaise up then put it down gently (in order to make sure the legs or leg supports are not damaged by any incorrect operation. With assistance from your adult partner, lift the sofa up then put it down as shown in the picture. Make sure all of the parts are connected in the right position and are sturdy.
Noble house Home Furnishings LLC Page 10 OF 10