Installation Manual

After extracting the zip file please follow these directions:
1) Make sure the REVEL is connected to the PC
2) Double click on the $FlashOnLine.exe$ F/W update program
3) Make sure there are no other programs or windows opened/running that may
accidently interrupt the update.
4) Click on $Update$ $ you will see the program erase, install, and verify the
firmware installation (during the installation you will see the REVEL's LED turn
off).
5) Once the firmware is finished installing you will see a note $F/W Update
Finish, Pug-Out Device$ and just hit the $Exit$ button (The LED on the mouse
will come back on to indicate the firmware has installed successfully).
6) Unplug the mouse from the USB port of the computer and connect it back in.
NOTE: If there is an error or interruption during installation the mouse will
no longer function (LED does not come back on). Don$t worry, the mouse is not
bricked (first time this happened I thought I bricked the mouse a few months
ago). Make sure the REVEL is still connected and just connect another working
mouse (Make sure the other mouse is another brand and not a second REVEL you may
own) to use to navigate and run the F/W update program again.