User's Manual
User Manual for the Anti-theft Alarm of Electric Vehicle
Functional
buttons
Status Operation Description
Enable
Protection
disabled
Tap once
Enable the protection: The horn sounds once and the light
is on for 2s. After 3s, the vehicle entered the alert status. At
this time, if the vehicle is pushed or shaken, the alarm will
make an alarm sound and lock the motor, and the light will
flash.
Driving
Long press for
2s
Anti-robbery: The vehicle is powered off and enters the
alert status.
Disable
Alert status Tap once
Disable the protection: The horn sounds twice, the light
flashes twice, and the anti-theft alarm is disabled (the alarm
can be suspended).
Push-button
start button
Protection
disabled
Long press for
2s
Start: press the start button to start the vehicle.
Power on
status
Long press for
2s
Enable the protection: If the anti-theft alarm detects a
wheeling signal (riding or strolling), the start button is
disabled. If the anti-theft alarm does not detect a wheeling
signal, long press for 2s to power off the vehicle.
Start
Any
status
Tap once Start: The vehicle can run without the key
Note: This sound is a NIU's custom chord. After the vehicle is started for 8 minutes, if the anti-theft alarm does not
detect the phase, vibration, or the switch status of the vehicle, the vehicle will automatically power off.
This product has undergone strict qua
lity inspection and management before leaving the factory.
Under normal use, it will be able to exert its superior
performance, but in order to ensure the rights and interests
of consumers and maintain the company and brand
awareness, it is hereby guaranteed within one year from the
date of purchase, any fault caused by the manufacturing
process or components reasons will be eliminated for free
with this warranty card.
Vehicle No. Anti-theft alarm No.
Date of Production Date of Purchase
Remarks
Dealer:
1. TX
2. RX
3. 12V input
4. Flash output
5. Flash output
6. Ground
7. DC output
8. Switch ACC
9. Power VCC
10. Button outer ring light
11. Button inner ring light
12. Idle
131 button switch
14. 12V key power
15. Phase
16. PWM signal
17. Switch ACC ECU
18. Lock the motor
Note: When installing the circuit of the anti-theft
device, please be careful not to get close to the
heating parts inside the vehicle to avoid accidents
Precautions:
1. The remote control is manufactured in
precision, please do not fall
2. If the remote control distance becomes shorter
or the light is dimmed, replace the battery.
The following conditions are not covered by the
warranty
1. Malfunction of the main unit, alarm horn and
remote control due to heavy fall or water
immersion
2. Natural consumption of the battery
3. Replace the PCB or part without permission
4. Damage caused by the force majeure or
(earthquake, fire, flood, etc.).
Manufacturer: Shenzhen Ruipu Xinke Electronics Co., Ltd.
Address: Eddie Monto B-4, Fifth Industrial Zone, Citianpu,
Gongming, Shenzhen
Tel: 0755-28646851 0755-28695128
Fax: 075528646879 Zip Code: 518115
Website: http://www.rpxk.net
E-mail: szruipu@yahoo.com.cn