eNBioAccess-T9 .User guide Version Eng-1.27 Copyright 2015 By NITGEN Co., LTD.
eNBioAccess-T9 user guide Version Date Description 1.00 2015-04-02 Initial Release 1.01 2015-04-15 1.02 2015-05-15 1.08 2015-06-12 1.09 2015-06-24 1.12 1.15 1.18 2015-07-17 2015-10-07 2016-04-27 1.22 1.23 1.25 1.26 2016-05-12 2016-05-17 2016-05-27 2016-07-04 1.27 2016-07-12 Firmware Version 0.0.2.1.00-000.04 Edited issue list checking after 1.00 version test 0.0.2.1.01-000.04 result Edited issue list checking after 1.01 version test x.x.x.1.02-000.
eNBioAccess-T9 user guide 3 Admin, Administrator - A user can enter terminal menu mode. Administrator means a person who can register/modify/delete user and can change the setting of terminal. - If there is no a registered administrator for the terminal, anybody can access to terminal menu and change the setting.
eNBioAccess-T9 user guide Table of Contents .................................................................................................... 2 .......................................................................................................... 3 Table of Contents .................................................................................................... 4 1. Checking before use ............................................................................
eNBioAccess-T9 user guide 5 3.6.6.1. Deleting all users ................................................................................... 47 3.6.6.2. Setting delete ........................................................................................ 48 3.6.6.3. Log data delete ..................................................................................... 48 3.6.6.4. Image log delete .................................................................................... 48 3.6.6.5. Deleting all .
eNBioAccess-T9 user guide 1. Checking before use 1.1. Safety precautions Warning Do not operate the device with a wet hand. Do not allow liquid such as water into the device . -> It can cause failure, electric shock. Do not device heat source near the device. -> It can cause fire. Do not randomly disassemble, repair or remodel. -> It can cause failure, electric shock or fire. Keep children away from the device. -> It can cause children‟s safety accident or failure.
eNBioAccess-T9 user guide 7 How to use touch screen To select the function you want, touch lightly with your fingertip. When the touch is recognized, the color of button or icon will be temporarily reversed and return to the orginal color. Touch screen operates by recognizing human body‟s tiny current (capacitive), so you must use your fingertip. (do not use fingernails). [Caution] - Do not let anything with electricity flow touch the touch screen.
eNBioAccess-T9 user guide 8 How to use face recognition Installation height for face recognition: We recommend that the device to be installed 125cm high from the ground. * Caution when installing - Install the device indoor. - Do not install under an incandescent light. - Do not install where there is direct sunlight or counterlight. NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050) Tel: 02-6488-3232, Fax: 02-6488-3099, E-Mail: customer@nitgen.
eNBioAccess-T9 user guide 1.2. Name of each part of the terminal Illuminance sensor Microphone Touch LCD Fingerprint sensor Card input IR LED Dual camera SD card input Speaker NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050) Tel: 02-6488-3232, Fax: 02-6488-3099, E-Mail: customer@nitgen.
eNBioAccess-T9 user guide 1.3. Screen information during operation ① Connection state with the server ② Current state of the entrance ③ Warning signals such as terminal separation ④ Fire sensor Menu button ID input button Entrance mode selection button (Indication of the state of the entrance) User guidance message Camera movie display Face registration location guide 1.3.1.
eNBioAccess-T9 user guide 1.3.2. Message information - Main screen - Authentication is successful - Authentication failed - Unregistered user ID is input - Unregistered card is input NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050) Tel: 02-6488-3232, Fax: 02-6488-3099, E-Mail: customer@nitgen.
eNBioAccess-T9 user guide - Pass back error occurred when anti-pass back function is used. - No response from the server while trying authentication. - Network to the server is disconnected while trying authentication. - Registered but no authentication authorization, authentication is tried when it is not access time - Waiting for user ID input NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050) Tel: 02-6488-3232, Fax: 02-6488-3099, E-Mail: customer@nitgen.
eNBioAccess-T9 user guide - Waiting for password input - Waiting for fingerprint input - Waiting for card input - Upgrading terminal program (Do not turn OFF terminal power when this message is displayed.) 1.4. Voice information during operation Division Voice information When authentication is successful You are authenticated. When authentication failed Please try again. NITGEN Co,.
eNBioAccess-T9 user guide 1.5. Buzzer sound information during operation Beep Reading Fingerprint A card is read. or card fingerprint is input in the fingerprint window Beep, beep Verification failed Long beep Verification successful Authentication is failed is Authentication is succeeded 1.6. Correct face registration and authentication method Face registration method - Maintain distance between terminal and face to be about 50 cm. (Place face into the guide line in the LCD screen.
eNBioAccess-T9 user guide 15 - Thick glasses frame or sunglasses can reduce face recognition rate. Installation precautions - Make sure the terminal is installed indoor. - Do not install the device under lighting with incandescent lamp. - It is not recommended that installation in environment exposed to backlight or direct rays of the sun. 1.7. How to register and input correct fingerprint Correct fingerprint input method If possible, input index finger as like to imprint thumbmark.
eNBioAccess-T9 user guide 16 The product is a fingerprint recognition system. If fingerprint is damaged or too tender, fingerprint can‟t be used, and password must be used. If hands are too dry, blow user’s breaths on the fingerprint for easy use. In case of children, If fingerprint is too small or too tender, sometimes use is difficult or impossible. It is needed to newly register fingerprint every 6 months.
eNBioAccess-T9 user guide 17 2. Introduction 2.1. Features Multi-Modal product which can use both of face and fingerprint authentication functions. Tilting camera automatically trace face position. Since an illuminance sensor and a Dual Camera (Color & IR) are installed, face recognition is impossible even in a dark place. Save log image which can be recognized. Can be used along with RF Card (EM Card; 125 kHz) and Smart Card (Mifare Card; 13.56MHz) simultaneously.
eNBioAccess-T9 user guide 2.2. Configuration diagram 2.2.1. Exclusive usage (access) DC12V Adapter (DC12V, 3.5A) Electric lock (Lock+, Lock-, Monitor) Exit Button 2.2.2. Connection with PC server (access, time & attendance and drinking water management) TCP/IP TCP/IP TCP/IP Internet / WAN / LAN TCP/IP Fingerprint authentication server (Static IP) database (MSSQL) Remote admin program (Management of user and terminal setting) NITGEN Co,.
eNBioAccess-T9 user guide 2.3. Product specification Division SPEC CPU 1GHz Quad Core CPU LCD 5.
eNBioAccess-T9 user guide 3. Configuration 3.1. Check points before configuration 3.1.1. Entering menu Press [ ] icon in the main screen to access into the main menu screen below. Press the relevant button to move to each sub menu. 3.1.2. Administrator authentication If an administrator is registered, the following administrator authorization screen will be displayed first.
eNBioAccess-T9 user guide 3.1.3. Method to enter menu without administrator authorization The method is to enter the menu when an administrator lost registered administrator card which is registered at the terminal or when fingerprint or face verification is impossible because there is no administrator.
eNBioAccess-T9 user guide 3.2. Menu configuration 1. User 1. Add management 2. Change 3. Delete 4. Delete All 5. Search 2. Network Terminal IP address Static IP / DHCP ▶ Terminal IP address ▶ Subnet Mask ▶ Gateway DNS server ▶ DNS server1 ▶ DNS server2 Server IP address ▶ Server IP address ▶ Port Terminal ID ▶ Terminal ID 3. Operation 1. Function mode setting 4. System 1.
eNBioAccess-T9 user guide [1~10] 4. Date/time ▶ Display format ▶ Set Date ▶ Set Time 5. Database 1. 2. 3. 4. 5. 5. Terminal 1. Sound setting Delete all users Delete setting Delete Log Delete image log Factory Init ▶ Voice volume ▶ Buzzer volume □ User Voice 2. Terminal option ▶ Read Card Number ▶ Card format □ Lock Terminal ▶ Card reader: Standard HID-iCLASS (option) 3. Input setting ▶ M0 ▶ M1 ▶ M2 ▶ IO ▶ Warn door open (sec) □ Tamper alarm 4. Lock setting ▶ ▶ ▶ ▶ 5.
eNBioAccess-T9 user guide 5. Message time 7. Terminal 1. System information 8. SD card display ▶ Message display time (ms) ▶ System information ▶ Disk ▶ RAM 2. Terminal ▶ Terminal information Terminal ID Application Language 3. Network ▶ Network info MAC IP 4. User ▶ User 5. Log ▶ Log 6. About ▶ About 1. Export 1. 2. 3. 4. 5. 2. Import 1. User data 2. System option 3. Others 1. Theme 2. F/W upgrade User data Event log System option Export all Picture 3.3.
eNBioAccess-T9 user guide Number of all registered users including administrator will be displayed on the top of the screen. To To To To To add a new user, press [Add] button. change a user, press [Change] button. delete user with specific ID, press [Delete] button. delete all users, press [Delete All] button. search registered user list, press [View] button. NITGEN Co,. Ltd / #1208 ,641-4, Munjeong-dong, Songpa-gu, Seoul, Korea (138-050) Tel: 02-6488-3232, Fax: 02-6488-3099, E-Mail: customer@nitgen.
eNBioAccess-T9 user guide 3.3.1. Adding Select [User] [Add] in the main menu to display the screen below. Input user ID to be registered and press [OK] button. In this case, ID which can be registered is automatically displayed in the screen. Hence, registration is easy and convenient. To change ID, Press [ ] button to delete the existing value and to input a new one. Press [BACK] button to cancel and move out. If an already registered ID is input, failure message will be displayed.
eNBioAccess-T9 user guide ※ Only the user who is registered as an administrator can change operation method for the terminal, and can register/change/delete information of all users saved at the terminal. Hence, care is required to register administrator. 3.3.1.1. Registering picture Press [ picture. ] button in [Add user] screen to register a Press [Save] button to register current camera image as a picture. To cancel registration and move out, press [Cancel] or [BACK] button. 3.3.1.2.
eNBioAccess-T9 user guide 3.3.1.3. Registering fingerprint ① Press [Fingerprint] button in [Add user] screen to register. To cancel registration and move out, press [ ] button. When the left screen is displayed, select a finger to be registered. ※ In case of registering many fingers, already registered finger will be displayed in blue circle ( ). If an already registered finger is selected, the following message will be displayed.
eNBioAccess-T9 user guide ④ Message on the left will be displayed when input is completed. Press [OK] button to complete registration and move to the upper menu. To register fingerprint again, press [Retry] button to start it again from the process of ② above. To cancel it, press [ ] button to move to upper menu. If a fingerprint is similar with an already registered fingerprint, message of “similar with an already registered fingerprint” will be displayed as shown on the left.
eNBioAccess-T9 user guide 3.3.1.4. Registering face Register face referring to „1.6 Correct face registration and authentication method„. Press [Face] button in [Add user] screen to select [Regular Registration] or [Quick Registration]. To cancel registration, press [BACK] button. * In case of general registration, register face through 5 steps after fixing face and pose according to the guideline.
eNBioAccess-T9 user guide ③ As shown in the left screen, if face is normally recognized, guide line will be changed into green to start registering face. At this point, do not move face and stand still for easy registration. ④ Move face to front/up/down little by little whenever information message is displayed in the screen. At this point, do not move more than 15 degree. After registering face, message of “completed” will be displayed as shown in the left screen.
eNBioAccess-T9 user guide 3.3.1.5. Registering password Input 4~8 digit password in password input window and press [OK] button to move input focus to „password check‟ window below. Input the same password again and press [OK] button. To cancel and move out, press [ ] button. ※ If wrong password is input after checking password input, message of “Check input value” will be displayed as below. 3.3.1.6. Registering card Press [Card] button in [Add user] screen to register a card.
eNBioAccess-T9 user guide 3.3.1.7. Authentication option ▶ ‟Fingerprint verification level‟ (Default setting: „0‟) This item is to decide fingerprint verification level for each user. Authentication level for each registered user can be changed by change this value. If it is set to „0‟, authentication will be done using 1 to 1 fingerprint verification level at the terminal.
eNBioAccess-T9 user guide 3.3.1.9. Saving After completing all registering processes, press [Save] button. At this point, if [Cancel] or [BACK] button is pressed without pressing [Save] button, the user won‟t be saved. The following shows LCD messages which can be displayed during registering processes.
eNBioAccess-T9 user guide During [Register Fingerprint] Not same fingerprint but different fingerprint is input during fingerprint registration During [Register Fingerprint] Already registered fingerprint is tried to be registered again (However, same fingerprint input with same user ID is possible.) ※ To register same fingerprint with another different ID, „System fingerprint recognition prevention of registration of similar fingerprint‟ function must be released.
eNBioAccess-T9 user guide Input user ID to be deleted and press [OK] button. Press [BACK] button to cancel and move out. Failure message of “unregistered user” will be displayed in the screen when unregistered ID is input, and success message of “deleted” will be displayed when registered ID is input. However, it is not deleted from the server even when it is deleted from the terminal. Therefore, it must be deleted from the server in order to completely delete it.
eNBioAccess-T9 user guide Operation is under Network mode but the terminal is not connected to the server. 3.3.3. Changing Select [User management] [change] in the main menu to display the screen below. Input user ID to be changed and press [OK] button. Press [BACK] button to cancel and move out. If an unregistered ID is input, failure message will be displayed. If a registered ID is input, information of the registered user will be displayed as below. NITGEN Co,.
eNBioAccess-T9 user guide Each icon displayed on the left has the following meaning. : number of registered face : number of registered fingerprint (X, 1~10) : whether password is registered (O: registered/X: not registered) : whether card is registered (O: registered/X: not registered) : user ID to be registered : user : administrator Touch picture to take user‟s picture again to register a new one. Since the method to change each item is same with that for user add, refer to „3.3.1. Add‟. 3.3.4.
eNBioAccess-T9 user guide User list will be displayed in the order of ID. Scroll down screen to search following user lists. List will be displayed by 100 persons unit. If there are more than 100 persons, press [BACK] or [NEXT] button below to search the previous or the next list. ▶ [ID]: Touch ID of a specific user to directly move to the screen to change it. ▶ [Delete]: Check at the check box on the right and press Delete button to delete checked users at a time.
eNBioAccess-T9 user guide ▶ [Name]: Press the button and input user name to display registered user list with the name in which input character string is included. Press [BACK] button in this screen to move to „3.3. User management‟ menu. Ex) In case of searching with “Yeon”, all users who have “Yeon” in their names will be searched as shown in the left screen. 3.4. Network setting Select [network] in the main menu to display the screen below. NITGEN Co,.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen Select [Static IP] if IP is fixed in the connected network is allocated. Select [DHCP] if there is a DHCP server at the connected network and IP is allocated from it. In case of setting it to [Static IP], set terminal IP address, subnet mask and gateway. If [DHCP] is selected, no need to set it. DNS can be input in [Server IP address] instead of IP.
eNBioAccess-T9 user guide Select [Application] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Function key setting [F1] ~ [F4], [Access], [ID Input] buttons used to change authentication mode for attending/quitting. Press function button to convert authentication mode into the relevant mode. Only the checked button will be displayed in the main screen.
eNBioAccess-T9 user guide 3.6. System 3.6.1. System Select [System] [System] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Length of user ID This part is to set the length of user ID. It can be changed to 4~ 20-digit ID and it must be same with the length of registered ID at the server program. If ID registered at the server program uses 6-digit ID of „000075‟, set it to „6‟.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ 1 to N level (3~9) This authentication level is used for 1 to N fingerprint verification. Since authentication level for each user is not set for 1 to N identification, it is always based on the authentication level of the terminal. ▶ 1 to 1 level (1~9) This authentication level is used for 1 to 1 fingerprint verification.
eNBioAccess-T9 user guide 3.6.3. Face recognition ▶ Default setting: same with the setting in the left screen ▶ Face Authentication Press the check box to enable the function. ▶ Matching Level Level used for face authentication. It is set to 1~4 of steps according to match degree with registered face. Match degree must be higher than the setting authentication level for successful authentication. The higher the authentication level, security can be the higher.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ Display format This is to set the method to display the current time of the terminal. - yyyy-mm-dd: displayed in the order of year, month, day - dd-mmm-yyyy: displayed in the order of day, month (English), year ▶ Set Date/Set time This is to change the current time of the terminal. If the server is connected and the above [Time sync] is set to [Auto], the time is synchronized with the time of the server.
eNBioAccess-T9 user guide To delete all users, press [Delete all users] button. To reset the setting value, press [Delete setting] button. To reset authentication record, press [Delete Log] button. To delete only image log, press [Delete image log] button. To delete the whole data to make the device to factory setting status, press [Factory Init] button. Press [Close] or [BACK] button to move to upper menu. 3.6.6.1.
eNBioAccess-T9 user guide 3.6.6.2. Setting delete Select [System] [Database] [Delete setting] in the main menu to display the screen below. To reset all setting values, press [Yes] button, or press [No] or [ ] button to cancel it. If nothing is input for 5 seconds in this status, message box will be closed without resetting.
eNBioAccess-T9 user guide To delete all image logs saved at the terminal, press [Yes] button, or press [No] or [ ] button to cancel it. If nothing is input for 5 seconds in this status, message box will be closed without delete. Success message in will be displayed when successfully deleted by pressing [Yes]. Only image saved as a log will be deleted, but authentication log itself won‟t be deleted. 3.6.6.5.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ Voice volume Scroll to the left/right in 0~15 steps to set voice size. Press [ ] button on the right to play voice in order to check voice volume. ▶ Beep volume Scroll to the left/right in 0~3 steps to set buzzer sound size. Press [ ] button on the right to make buzzer sound in order to check buzzer sound volume.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ Read Card number Touch a card on this screen to display card No on the LCD. Card No according to the setting value can be searched by changing [card format]. ▶ Lock terminal The function is directly lock or unlock the terminal by an administrator not from the server program but at the terminal.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ M0: Set this to connect an external contact to DM0. (If motor lock is used, set it to [door open status NO] or [door open status NC].) - Not use: Select this when nothing is connected. - Door open status NO or door open status NC: when door open status monitoring pin is connected. Set NO/NC according to status of pin which is input during detection. ▶ M1/M2: Set this to connect an external contact to DM1/DM2.
eNBioAccess-T9 user guide ▶ Tamper Alarm If this is checked ( ), warning sound will be made when the terminal is disassembled. To apply the setting value, press [OK] button, or press [BACK] button to cancel and to move to the upper menu. 3.7.4. Lock setting Select [Terminal] [Lock] in the main menu to display the screen below.
eNBioAccess-T9 user guide To apply the setting value, press [OK] button or press [BACK] button to cancel and to move to the upper menu. 3.7.5. External terminal setup If you select the [Terminal]->[External device] in the main menu, the following window appears. ▶ Basic setting : Same with the window at the left side. ▶Site code It sets the sitecode value sent in Wiegand output below. ▶Wiegand Output It is used only when the special controller is equipped running by the Wiegand input.
eNBioAccess-T9 user guide Send example) SiteCode:001(1h), UID:123456(1E240h) 0 00000001 00000001 11100010 01000000 0 User definition It is set by the user definition, which only can be set in the server, and the setting type only can be inquired in the terminal. Click [OK] button to apply the set value, and click [BACK] button to cancel and return. 3.8. Screen setting 3.8.1. Theme Select [Display] [Theme] in the main menu to display the screen below.
eNBioAccess-T9 user guide ▶ Default setting: same with the setting in the left screen ▶ Display option This is to select image displayed in authentication success message window. - None - Registered photo ▶ Save success log If this is checked ( ), capture camera image and save it as an image log when authentication is successful. ▶ Save failed log If this is checked ( ), capture camera image and save it as an image log when authentication failed.
eNBioAccess-T9 user guide Select [Display] [Option] in the main menu to display the screen below. ▶ Default setting: same with the setting in the left screen ▶ Screen saver (5 seconds ~ 10 minutes) If nothing is input for the setting time, the screen will be automatically OFF. However, LCD will be always ON if it is set to „None‟. ▶ Display option This is to set detail to be displayed when authentication is successful.
eNBioAccess-T9 user guide 3.9. Terminal information 3.9.1. System information Select [Terminal info] [System] in the main menu to display the screen below. ▶ System info This is to display hardware and firmware version of the terminal. ▶ Disk (amount used/total) This is to display amount of used storage space. If amount of used storage space is getting too much, it will be displayed in red. ▶ RAM (amount used / total) This is to display amount of RAM being used out of total RAM.
eNBioAccess-T9 user guide ▶ Terminal info This is to display option setting value of the terminal. To move to upper menu after searching, press [Close] or [BACK] button. 3.9.3. Network information Select [Terminal information] [network] in the main menu to display the screen below. ▶ Network info This is to display network setting value of the terminal. To move to upper menu after searching, press [Close] or [BACK] button. NITGEN Co,.
eNBioAccess-T9 user guide 3.9.4. User information Select [Terminal info] [User] in the main menu to display the screen below.
eNBioAccess-T9 user guide ▶ Log search Press [Terminal info] [Log] -> [View Log] -> [Log Search] button to set start date, end date, event condition and press [OK] button to search log. ▶ Search result Log search result is to check information of date, time, ID, authentication result (successful or failed). Press [BACK] or [NEXT] button to check search information. To move to upper menu after searching, press [Close] or [BACK] button. 3.9.6.
eNBioAccess-T9 user guide ▶ About License information of Korean font applied to the terminal will be displayed. To move to upper menu after searching, press [Close] or [BACK] button. 3.10. SD card Select [SD card] in the main menu to display the screen below. < When SD card is not inserted,> ※ This can be done only when SD card is inserted. As shown in the figure below, the card must be over side down. (Only SD card with capacity below 32G can be used.) NITGEN Co,.
eNBioAccess-T9 user guide This function is to backup data of the terminal using [EXPORT]. Data backed up by [IMPORT] can be copied back to the terminal. ▶ Export This is to copy the relevant data from the terminal to an external SD card. - User data: copy user DB into „eNBioAccessT9/terminal ID/user/today‟s date‟ folder in the SD card. - System option: Copy option setting values of the terminal into „eNBioAccesT9/config‟ folder.
eNBioAccess-T9 user guide 64 ▶ import This is to copy the relevant data from a SD card to the terminal - User data: Copy user data of *.ndb file name from „eNBioAccessT9/user‟ folder in the SD card to the terminal. - System option: Copy option setting values of the terminal saved in the SD card („eNBioAccessT9/config‟ folder) by exporting to the terminal. To apply a new DB or setting value when import is performed, the terminal must be rebooted.
eNBioAccess-T9 user guide 4. How to use terminal Background image and configuration in the main screen can be changed according to the setting by an administrator. In addition, if screen saver time is set by the administrator, LCD screen will be automatically OFF if nothing is operated at the terminal for the designated time.
eNBioAccess-T9 user guide Press desired access mode button in access mode selection screen in the left to close selection screen and to convert mode in the main screen into the relevant mode. 4.2. ID input Press [Input ID] button in the main screen to display the following ID input window. Input user ID and press [OK] button to display fingerprint input, face input, card input or password input screen according to Authentication Method of a user. NITGEN Co,.
eNBioAccess-T9 user guide 4.3. Authentication 4.3.1. Face authentication ▶ 1 to N identification Set face position until guide line is changed to green, look at the camera when the guide line becomes green and then stop movement for a moment to proceed with authentication. ▶ 1 to 1 verification As shown in the figure below, press [ID input] button to input ID first.
eNBioAccess-T9 user guide ▶ Authentication while loading fingerprint data The saved fingerprint data of all users will be loaded to the memory for 1 to N identification during terminal booting. Progress will be displayed during loading in the top left of the screen as below. Server 1 to N identification will be tried if server authentication is included among the authentication methods at the terminal when 1 to N fingerprint verification is requested by a user during loading.
eNBioAccess-T9 user guide 4.3.5. Multi authentication In case of a user for whom more than 2 authentication methods such as card & fingerprint, card & fingerprint & face are required, if ID is input first, authentication will be processed in the order of (fingerprint password card face). Multi authentication will be performed as well when face or fingerprint is authenticated first. NITGEN Co,.
eNBioAccess-T9 user guide 70 FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.