User's Manual

ManualsBrandsNintendo ManualsElectronicsEDEV

HAT-002 (EDEV)

Usage Manual

Version 2.0

Nintendo Confidential

The content of this document is highly confidential and should be handled accordingly.

The contents of this document cannot be duplicated, copied, reprinted, transferred,

distributed, or loaned, in whole or in part, without the prior approval of Nintendo.

This document contains confidential and proprietary information of Nintendo, and is

protected under confidentiality agreements as well as the intellectual property laws of the

United States and of other countries.

No part of this document may be released, distributed, transmitted, or reproduced in any

form, including by any electronic or mechanical means and by including within information

storage and retrieval systems, without written permission from Nintendo.

All company and product names in this document are the trademarks or registered trademarks of their respective

companies.

Summary of content (7 pages)

PAGE 1
HAT-002 (EDEV) Usage Manual Version 2.0 Nintendo Confidential The content of this document is highly confidential and should be handled accordingly. The contents of this document cannot be duplicated, copied, reprinted, transferred, distributed, or loaned, in whole or in part, without the prior approval of Nintendo.
PAGE 2
EDEV The EDEV is a piece of SWITCH development hardware that closely resembles the SWITCH retail product in shape. Because the EDEV looks like the SWITCH retail device and has a built-in battery, you can use it to test applications in a cable-free environment.
PAGE 3
Components EDEV Console Figure Appearance of the Switch system
PAGE 4
Table Descriptions of Each Component Numbers Name Description A POWER Button Operates the console sleep mode and turns the console on B Volume buttons Two buttons for adjusting the volume. C Air vent The air vent for the console cooling fan. D Headset jack The device does not have a built-in mic. A headset must be Within the Figure and off. connected to this port to use in-game chat or similar features. E Game card slot A new game card slot.
PAGE 5
Numbers Name Description Within the Figure display for gameplay. K Air intake - NX-SoC - Main memory The air intake holes for the console cooling fan. SoC equivalent to Tegra X1 from NVIDIA. 4 GB of LPDDR4. This memory (VRAM) is also used for displaying graphics on the screen. We are currently considering how much memory will be available for application use. - System memory - Wireless 32 GB. IEEE 802.11 a/b/g/n/ac and Bluetooth 4.0 +LE are included.
PAGE 6
Turning the EDEV ON and Off Turn on the EDEV by pressing the POWER Button on the top of the EDEV console. When the EDEV system is on, you can turn the power off by pressing the POWER Button on the top of the hardware device and keeping it held down for at least 12 seconds until the screen turns off.
PAGE 7
Regulations for Equipment Use 5150-5350 MHz band is restricted to indoor operation only. High-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.  The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.