Installation Instructions

2. Polling rate adjustable function
2 adjustable polling rate 125Hz/250Hz, the default is 125Hz. Press
and hold the right button and scroll wheel button to converting, the
LED flash 5 times in low speed for 125Hz converting, the LED
flash 5 times in fast speed for 250Hz converting.
3. The unique side keys have forward and backward functions.
4. Saving power mode and power switch off
If mouse is stay out of work for 8 minutes, it will turn to power
saving mode, press any button to restart it.
If you turn off PC or take out Nano receiver from USB port, press
any button or move the mouse to enter the power saving mode.
Tips: if you don't use the mouse for a long time, please remove the
battery to avoid corrosion.
5. Nano receiver
A very small size design for Nano receiver, it can be plug and stay
on USB port of PC/Notebook without interference.
Portable design for travel, Nano receiver can be plug in the slot on
bottom of mouse.
Reconnection
Both of mouse and Nano receiver has a built-in code, it can be
setting one mouse to one receiver, or few of mouse to one receiver.
Mouse and receiver need to reconnect under the condition of High
temperature, high magnetic, strong vibrate.
1. Plug off Nano receiver from USB port, and plug it on
2. Keep the mouse in 50CM with receiver, re-store the battery
3. You can use it by reconnection
Note
If there are large obstacles between the mouse and the receiver, the
transmission distance will be reduced.
The uneven or reflective desktop may affect the use of the mouse.
Package Content
1x wireless mouse
1x Nano receiver
1x manual
L70*W105mm
Manual
Wireless Mouse
L766
Product Feature
● 2.4G working frequency, extensive applicability, transmission
distance can reach to 10 meters.
● Using USB high-speed transmission technology. The transmission
speed is two times faster than the normal mouse. The polling rate
can reach to 250Hz and can be switched to 125Hz. No delay can
better meet the requirements of gamers.
● Using the most advanced high-end power-saving chip PAW3212,
lower power consumption, more stable cursors and stronger
adaptive surface ability.
● Using infrared LED as mobile tracking source.
● Five kinds of adjustable CPI level: 800/1200/1600/2000/2400CPI,
with CPI gear indication. The default is 1200CPI.
● Multilevel power-saving mode, saving the battery energy as far as
possible.
● Super micro (Nano) receiver, plug and play.
Installation
1. Find the wireless mouse and Nano receiver in package
2. Plug Nano receiver to USB port on PC
3. 1 PCS AA battery into Mouse body Properly
4. LED indicator will keep flash for few seconds, the Mouse is ready
to work.
Advanced function
1. CPI adjustable function
With 5 adjustable CPI 800/1200/1600/2000/2400, the default is
1200CPI. Press the switch button on top of Mouse can easy to
adjust CPI. LED indicator will flash once while it converting to
800CPI, LED indicator will flash twice while it converting to
1200CPI, LED indicator will flash three times while it converting to
1600CPI, LED indicator will flash four times while it converting to
2000CPI, LED indicator will flash five times while it converting to
2400CPI.
CPI
built-in LED indicator
left button
scroll wheel button
right button
backward
forward
AA battery slot
Nano receiver slot