User's Manual

Instruction of Remote Controller

1. Brief Account:

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including

interference that may cause undesired operation.

2. The Device Data:

Model designation: YLT-5C

Power: 12V battery

Frequency: 315 MHz

3. Use Description:

Each of receiver’s individual function (normal open、2 hour setting、4

hour setting、6 hour setting 、8 hour setting 、nature lighting activation、

off and waiting )can be turned into active status by pressing transmitter’s

corresponding function key “ON、 2 、4、 6 、8、 ¤、 OFF”. The status

of receiver’s each individual function can also be distinguished by observ

-ing its corresponding indicator (ON、 2、 4、 6、8、 ¤ 、ON flashing).

PAGE 1
Instruction of Remote Controller 1. Brief Account: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. The Device Data: Model designation: YLT-5C Power: 12V battery Frequency: 315 MHz 3.
PAGE 2
1>Press the transmitter key “ON” can turn into active the receiver corresponding function indicator“ON” ，normal open. 2>Press the transmitter key “2” can turn into active the receiver corresponding function indicator“2” ，2 hour setting. 3>Press the transmitter key “4” can turn into active the receiver corresponding function indicator“4” ，4 hour setting. 4>Press the transmitter key “6” can turn into active the receiver corresponding function indicator“6” ，6 hour setting.
PAGE 3
8 1 2 5 3 6 7 9 10 4 11 1: 4 hour setting 2: 6 hour setting 3: 8 hour setting 4: nature lighting activation 5: 2 hour setting 6: OFF 7: ON 8: indicator light 9: battery compartment 10: battery 11: battery cover 5. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.