WIRELESS DIGITAL REMOTE THERMOMETER
RECEIVER A1: LCD Readout A2: Buttons A3: On/Off Button A4: Clip Stand LCD DISPLAY B1: Animal Icon B2: Meat Type B3: Receiver Low Battery B4: Set Temperature B5: Temp/Timer Selection B6: Timer B7: Taste Choices B8: Wireless Signal B9: Transmitter Low Battery B10: Transmitter Temperature
BUTTONS BUTTON/MODE TEMP/TIMER MEAT TASTE ENTER/ST-SP °C-°F/H-M TEMP switch to TIMER meat selection taste selection confirm selection increase 1 degree* decrease 1 degree* switch to °C or °F TIMER switch to TEMP ------start/stop ** increase 1* decrease 1* switch Hours and Minutes *Press and hold button to accelerate values **Press and hold button to pause TRANSMITTER C1: LED Indicator C2: Probe Wire Plug C3: Probe Cord Storage Mount C4: Probe Storage Insert C5: Battery Cover C6: On/Off RECEIVER MO
BATTERY INSTALLATION and INITIAL SET UP 1. Place receiver and transmitter on a flat surface. Avoid getting close to possible interference sources (electronic devices and radio installations). 2. Remove the protective foil from the display of the receiver. 3. Remove the receiver mount. 4. Remove the battery cover and insert (2) AAA batteries into the compartment according to the “+” and “–“ polarity symbols. Replace the battery compartment cover. 5. Slide the on/off switch up to “on”.
MEAT AND TASTE SELECTION In TEMP mode, press MEAT button to scroll through meat choices. When selection is flashing, press ENTER/ST-SP to confirm selection. Press TASTE button to scroll through taste choices. When selection is flashing, press ENTER/ST-SP to confirm selection. If ENTER/ST-SP is not pressed, the setting is invalid and it will auto-exit in 30 seconds.
TEMPERATURE SETTING To choose a different temperature from the program settings, press or to set the temperature value. When the value is flashing, press or to select preferred value. Hold the button down for 3 seconds to accelerate the values. After setting, press ENTER/ST-SP to confirm. If ENTER/ST-SP is not pressed, the setting is invalid and it will auto exist after 30 seconds.
PRECAUTIONS This product is exclusively intended for the field of application as described above. It should only be used as described within these instructions. Unauthorized repairs, modifications, or changes to the product are prohibited. Low batteries should be changed as soon as possible to prevent damage caused by leaking. Never use a combination of old and new batteries together, nor batteries of different types.
Should this product require service (or replacement at our option) while under warranty, do not return to retailer. Please contact Customer Service at 1-800-289-0944. The BROOKSTONE® trademarks, names and logos are owned by BKST Brand Holdings LLC. ©2019. All rights reserved. Manufactured, marketed and distributed by Lifetime Brands Inc. under license. Made in China BS-201 SS 6.