User Instructions

ManualsBrandsNingbo Litesun Electronics ManualsElectronicsDuplex Receptacle with WIFI function

Model: LQ-2-W1

Quick Start for CE Smart Wi-Fi Plug Setup:

1. Download CE Smart app from the App Store or Google Play or scan QR code.

2. Connect mobile device to your 2.4GHz Wi-Fi network. Please note this Smart Plug can

only be connected via a 2.4GHz network.

3. Launch CE Smart and follow the in-app instructions to connect the Smart Plug to your

network.

a. Login to CE Smart b. Click Add Device c. Set rapid blink, click Confirm

d. Enter Wi-Fi password e. Connecting device

Summary of content (6 pages)

PAGE 1
Model: LQ-2-W1 Quick Start for CE Smart Wi-Fi Plug Setup: 1. Download CE Smart app from the App Store or Google Play or scan QR code. 2. Connect mobile device to your 2.4GHz Wi-Fi network. Please note this Smart Plug can only be connected via a 2.4GHz network. 3. Launch CE Smart and follow the in-app instructions to connect the Smart Plug to your network. a. Login to CE Smart b. Click Add Device d. Enter Wi-Fi password c. Set rapid blink, click Confirm e.
PAGE 2
f. Edit Name, Share or Done g. Device Home Screen h. ON/OFF Control After you have successfully set up the CE Smart app and your device(s) you may control them remotely from your mobile device using a Wi-Fi or Cellular connection. Compatible with Alexa Echo and Google Home. Wi-Fi Smart Socket: CE Smart App Reference Guide: Register / Create an Account Tap “Register” to create an account using your email address or mobile phone number.
PAGE 3
the instructions to manually select your country code. Enter your email address or mobile number (do not include dashes or spaces) and tap Login. • If you enter your mobile number, you will get a verification code via text message. Enter the verification code, create a password, and tap "Confirm" to finish your registration. • If you enter your email, create a password and tap "Confirm" to finish your registration. Login / Registered Account • Tap “Login” to sign in to your account.
PAGE 4
• Make sure the device’s indicator light is slowly flashing (1 time every 3 seconds). Press and hold Wi-Fi power button for 8-10 seconds to set blue indicator light to fast flashing. Press and hold again until blue indicator light slowly flashes. • Tap “Confirm indicator slowly blink”. • Enter your 2.4GHz Wi-Fi password and tap “Confirm”. • Open Wi-Fi Settings to connect to Device’s Access Point Wi-Fi name. • Locate then Tap the Wi-Fi device name, i.e. SmartLife_XXXX. • Tap Connect.
PAGE 5
number may be grouped. • Use Echo> Follow the on-screen instructions for how to set up voice control of your device with the Alexa app using Amazon Echo to control a device. • Send Feedback> Send feedback to the manufacturer. • Check for Firmware Update> Display the latest version. • Remove Device> Remove the device from the app. Note: this won’t delete the customized device information; previously connected device information is stored.
PAGE 6
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.