User's Manual

LTS-W3 User Manual

1. Product parameter

USB Output

DC5V/3.4A

（total）

Each USB Output is

2.1A

Wireless charging

Output Power

Qi-EPP 10W Max

Input voltage

AC125V/60Hz

Protect function

Over temperature protection, FOD foreign object detection

2. Description of wireless charging function

The indicator status is described in the following table：

status Power-on Standby Charging After full

Metal foreign

body detection

Indicator

status

bright

Always

off

Breathing

state

Everbright Flash 1s / time

1625W

2.1

Put the mobile phone with wireless charging

function (such as

iPhone11 /12/13, Samsung Note8/S9+, Huawei mate30Pro, etc.) to the center of

wireless charging and the charging will start automatically. When the wireless charger

is in normal working condition, the LED green light blink slow.

PAGE 1
LTS-W3 User Manual 1. Product parameter USB Output DC5V/3.4A（total） Wireless charging Output Power Input voltage Each USB Output is 2.1A Qi-EPP 10W Max 1625W AC125V/60Hz Protect function Over temperature protection, FOD foreign object detection 2. Description of wireless charging function 2.1 Put the mobile phone with wireless charging function (such as iPhone11 /12/13, Samsung Note8/S9+, Huawei mate30Pro, etc.) to the center of wireless charging and the charging will start automatically.
PAGE 2
.2 When charging, you need to keep the center position of the phone aligned with the center position of the wireless charger to perform wireless charging. If it is not working properly, please adjust the position of the phone until the phone shows normal charging or the LED green light blink slow. 3.Notes          Do not mix metal foreign objects between the phone and the wireless charger while charging.
PAGE 3
ISED RSS Warning/ISED RF Exposure Statement ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.