User Instructions

Remote control instructions

1. The key functions of the panel are shown in the figure

2. . Function description: long press the power start button for 3 seconds, and

the blue wireless indicator will turn on.Power off automatically after 2

minutes without any operation.Press the OUT button. The blue indicator

flashes winch outgoing (nylon rope/steel cable).Press IN button blue

indicator light flashes winch incoming (nylon rope/steel cable)。

3. Distance: ≤ 40 feet. In case of different degrees of interference in the actual

use environment, the distance of remote control will also change

correspondingly (the distance will be shortened).

4. Transmitter voltage: DC2-3.6v, Receiver voltage: DC9-15v

Blue power indicator light

OUTb

utton

Power start button

INbutton

PAGE 1
Remote control instructions 1. The key functions of the panel are shown in the figure Blue power indicator light OUTbutton Power start button INbutton 2. . Function description: long press the power start button for 3 seconds, and the blue wireless indicator will turn on.Power off automatically after 2 minutes without any operation.Press the OUT button. The blue indicator flashes winch outgoing (nylon rope/steel cable).
PAGE 2
FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.