User Manual

Remote control Manual

1. The key functions of the panel are shown in the figure

2. Function description: long press the power start button for 3 seconds, and

the blue wireless indicator will turn on.Power off automatically after 2 minutes

without any operation.Press the OUT button. The blue indicator flashes winch

outgoing (nylon rope/steel cable).Press IN button blue indicator light flashes

winch incoming (nylon rope/steel cable).When the wire control is used, the

wireless remote control blue indicator light is off and the red wire control

indicator light is long- bright

3. Distance: ≤ 40 feet. In case of different degrees of interference in the actual

use environment, the distance of remote control will also change

correspondingly (the distance will be shortened).

4.Transmitter voltage: DC2-3.6v, Receiver voltage: DC9-15v

Wireless indicator

Power start button

OUTbutton

INbutton

Wire-controlled indicator light

PAGE 1
Remote control Manual 1. The key functions of the panel are shown in the figure Wireless indicator Power start button Wire-controlled indicator light OUTbutton INbutton 2. Function description: long press the power start button for 3 seconds, and the blue wireless indicator will turn on.Power off automatically after 2 minutes without any operation.Press the OUT button. The blue indicator flashes winch outgoing (nylon rope/steel cable).
PAGE 2
IC Statement: This device complies with Industry Canada’s licence‐exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.