User's Manual

User Manual
Operating instruction：
1. Electronic Energy Saving Lamp Input Volt: 120VAC, 60Hz
2. Never disassemble or modify-any changes could void the user’ authority to operate
this device.
3. Not for use in totally enclosed fixtures.
4. Risk of electric shock-do not use with where directly exposed to water.
5. This device is not intended for use with emergency exit lights.
6. This product could produce interference when used near a TV, radio, wireless remote
control or maritime safety communications or other critical navigation or
communication equipment operating between 0.15-30MHZ if interference should
occur, move the lamp away from the appliance a distance of three feet or more, Or,
plug the lamp or the appliance into a different outlet.
7. To prevent burns, do not touch the bulb buring operation or immediately after
switching off.
8. Not for use with dimmers, electronic timer or photocell devices or occupancy sensor.
9. It does not start up when placed below -15˚C.
10. “Added weight any cause instability of free- standing portable lamps. Use only with
portable lamps in which the distance from the bottom of the base to the top of the
lamp holder does not exceed three (3) times minimum base width. Use only with
portable table lamps which are provided with lamp shades
Warning Label
WARNING：
Not for use with dimmers.