Instruction Manual

Micro USB Port
Front Back
On/Off Switch
Product Overview
Product Specification
How To Use
Charging Your Speaker
Product Contents
Power On/Off
Instruction Manual
Model: OR1123-SP
Description: LED infinity speaker
Thank you for choosing our product.
We hope you will enjoy it very much.
Wireless speaker x 1 pc
Micro USB Charging Cable x 1 pc
Instruction manual x 1pc
Power on
Slide the ON/OFF switch to the“ON”position
Power off
Slide the ON/OFF switch to the “OFF”position
Bluetooth version:5.0
Output power: 3W
Power supply:Li-ion Battery 3.7V 300mAh
Pairing distance: 10 meter
Signal&noise ratio: 85dB
Impedance: 4 OHM(Ω)
Playing time at 50% volume: 3-3.5hrs
With Micro USB cable included
Playing Music
To do this, perform the following steps:
1. Keep the distance between your wireless speaker and
mobile phone (or other devices) within 32.8 Feet.
2. Power on the wireless speaker.
3. Active the Bluetooth function on your phone within range
and select "Orbit 1123SP" from the list shown.
4. Your will hear a beep sound when pairing is successfully
This Bluetooth speaker is powered by integrated
rechargeable lithium battery. Charge the battery
as follows:
lnsert the charging cable into the DC 5V socket on the unit.
Connect the USB plug into a PC or AC/DC adaptor.
The LED indicator turns red and the battery is being charged.
You must select a qualified charger from a regular manufacturer.
You must charge the speaker if it has been not used for
more than 12 months.
NOTE:
Safety instruction
Read this manual carefully before putting the appliance into
operation and keep this manual for future reference
Keep the device away from heat, direct sunlight
and sharp edges.
Keep the device away from naked flames.
Do not insert any metal object into the device.
Risk of short circuit!
To avoid a static charge, do not use the device in
an extremely dry climate.
Do not repair the unit yourself but contact an
authorised specialist..
Safety instruction
Bluetooth wireless technology streams audio from all your
device. The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc and any use of such
marks by Orbit Innovations is under license. Other trade
marks and trade names are those of their respective owners.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this device.This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. lf
this equipment does cause harmful interference to radio or television
reception，which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
The device has been evaluated to meet general RF exposure requirement.
Bluetooth Statement