S-1801 Camera sensor wall light manual Connecting way of camera: 1、 Scan the QR code and automatically enter the application store to download the corresponding version of Kalay software and install it successfully. Android ios 2、 In the phone settings, click on WLAN or WIFI, select the network with 21 digits plus letters, and connect it. (Open the light) 3、 Open the Kalay, click the“+”, then chose the“IPCam”. Chose Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
the “Not been connected to the router”. Then turn to"Add Device Page", enter "123" in the device password, click the "√" symbol on the right . Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
4、 Now, the camera has been successfully connected. Next, let the camera connect to the Internet. Turn to“WiFi Network”page，please chose available and stable wifi, enter the password of wifi, connect the wifi successfully. Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
5、 On the Kalay software main page, click to select the camera, prompt "the current device password is not safe, please modify, thank you", click "OK" below - -> On the "Change Password" page, change the password and select "Yes" --> prompt "Congratulations! The password has been updated successfully", click "OK" --> Settings successfully, you can start using the camera. . Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
6、 Click the “speaker”button, you can hear the sound from the camera. Click the“microphone”, you can talk to someone around the camera. Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
7、 Install the corresponding version of Kalay software in the new mobile phone, and set the mobile WiFi network to the same WiFi network of the camera. Open the kalay software and click the "+" sign below -> "Network Camera" -> "Add New Connected On the router device --> local search page, the camera light added in step 3 appears automatically, and the network IP address is displayed below.
Operation of light Installation Must be installed by a qualified person Loosen the screw at the back of the light and remove the wall bracket. Drill two mounting holes in the wall bracket using an appropriately sized drill bit for mounting screws Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
Hold the wall bracket against the surface it is to be mounted onto and screw it in place using 2 mounting screws. Note: if the mounting surface requires the use of wall plugs (e.g.brick or concrete)or pre-drilling(e.g. hard wood),first mark and drill pilot holes in the wall using the wall bracket as a template.
Notes about installation and usage 1. It is forbidden to install the device with visible damage on the casing or on the power cord. 2. During the installation, make sure to disconnect the power supply and keep health and safety rules. 3. A correctly installed device can be only connected to an efficient electrical installation. 4. Works related to electrical connection should be performed by a specialist with an appropriate electrical permissions. 5.
permanent damage to the device (see wiring diagram below). 6. In order to ensure optimal heat dissipation, the camera must not be covered with any material. 7. Installation must be done directly on a normally flammable substrates (i.e. the one whose ignition temperature is at least 200°C, which does not deform and does not soften at this temperature, e.g. wood and wood-based materials with a thickness above 2mm) or non-flammable (i.e. that does not maintain smoking, e.g. metal, gypsum, concrete). 8.
environment. Caution: To maintain the compliance with the FCC’s RF exposure guideline, install the Robotic Vacuum Cleaner at least 7.9” (20 cm) from ALL persons. The transmitter of this device must not be co-located or operating in conjunction with any other antenna or transmitter. Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
Operation Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
The light has 2 different control dials which allow you to adjust the settings these control dials can be located underneath the motion detector head. Sensitivity to light(LUX) The light duration once motion has been detected(Time) LUX: This is the level of darkness reached before the light turn on. If set to maximum level, the light will turn on in most situations ranging from dusk to daylight. If set to minimum level, the light will turn on in the dark.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Modification: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device. Name: Ningbo Fiercer Leopard Electrical Appliance Co., Ltd. Address: No.
