User's Manual

Emitter Specification
Type specification
Technical support
Version NO. : A/02
Fucntion instructionTechnical specification
Input voltage碋3V(CR2430)
Transmitting frequency碋433MHz
Transmitting power碋10 milliwatt
Operating temperature碋-5
0
C—50
0
C
Transmssion distance碋200 meters open office硽
35 meters on two walls
Transmitter: five channels (DC1672), fifteen channels (DC1673). One number
of LCD screen means one control channel. Press “channel choose” button P1-
(number descending) or P1+ (number increasing) to change the channel. On
the analogy of this, loose finger when the indicator light move to suitable
channel that you select effective channel. If LCD screen number show “0”
that means all channels if effective (group control state).
Notice: transmitter do not exposed to moisture and strike, so as not to affect life.
When you use transmitter, if found emission distance obviously short or less sensitive,
please change another same new battery. Please have batteries for recycling.
DC1672 DC1673
A
Additional
function
Matchable R tubular motor set up
During the settings, the time between two operation
must be shorter than 4s, otherwise it will quit the setting
During the settings, the time between two operation
must be shorter than 6s, otherwise it will quit the setting
During the settings, the time between two operation
must be shorter than 10s, otherwise it will quit the setting
A
Additional
function
Matchable DC1680 / DC1681 set up
A
Additional
function
Matchable DC136 set up
Power on
Setting
is ok
OK
P2×1
See indicator
flashing
See green in-
dicator flashing
and extinguished
See indicator
long flashing
EmitterReceiverReceiver
Stop button×1 Up button×1
Up button ×1
Down button ×1
OK
OK
Power on
Hear long sound
Hear di di...
Setting is ok.
The up button control
the motor clockwise
Setting is ok.
The down button control
the motor clockwise
Sound tip
three times
Sound tip
three times
Power on EmitterReceiverReceiver
See indicator
flashing
Setting
is ok
OK
See indicator
flashing
See indicator
long flashing
(Up button +Down button)×2s Stop button×1 Up button×1
Up
button
Stop
button
Down
button
LCD screen
DC1673
15 - channel LCD emitter
P1-
button
P1+
button
Up
button
Stop
button
Down
button
LCD screen
DC1672
5 - channel LCD emitter
P1-
button
P1+
button
T
Technical
support
T
Technical
support
After matching code for new emitter,
it will clear all the data in the motor
Reserved
button
Reserved
button
Setting button=P1+ button +Reserved button
(P1+button
+Reserved button)×2
Setting
is ok
Stop×1
(P1+button+
P1-button)×1
P1+button+P1-
button,hold on
A
Additional
function
The valid channels selection
In the setting state,press the up or down
button you can quit quickly, if you want
to change the valid channels ,reset it.
The screen
will display o
Press P1+button or P1-button,
selecting the channel (channe l
1 to channel 15) you need
OK
The screen
will display 15
The screen
will display C
Or