User's Manual

DR-2010 User Manual
1.
Product parameter
USB Output
DC5V/2.4A（total）
Each USB Output is 2.1A
Wireless charging
Output Power
Qi-EPP 10W Max
Rate Input Voltage/Power
AC125V/60Hz
Protect function
Over temperature protection, FOD foreign object detection
2. Description of wireless charging function
1875W
Put the mobile phone with wireless charging function (such as
iPhone11 /12/13, Samsung Note8/S9+, Huawei mate30Pro, etc.) to the center of
wireless charging and the charging will start automatically. When the wireless charger
is in normal working condition, the LED green light blink slow.
Precautions
 RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors.
Do not expose this product to rain, wet or damp conditions. Water
entering this product will increase the risk of electrical shock.
 No user serviceable parts inside; do not unscrew.
 This product must be properly secured into an outlet
 Caution: This shelf (or compartment) is intended for use with a
product weighing not more than 500 grams and having dimensions that
will permit it to sit evenly on this shelf. Use with other products
may result in instability causing possible injury"
Operating instructions

Plug your wireless charge current tap device into a standard 125 V
AC grounded outlet
 Plug properly grounded power pin in the provided receptacle.