User's Manual

1/2

PA- series Specification

. The picture of the adaptorⅠ

ⅠⅠ

Ⅰ and the remote controller

PA-US1-01RFP （WATERPROOF IP44）

LED Indicator

Single control

button

remote controller(SD-US2-RF) remote controller(SD-US1-RF)

Ⅱ

ⅡⅡ

Ⅱ.User instruction

1. Press momentary on the Key, the LED indicator was lightened up when the socket-outlet

become live, the socket-outlet is broke when this LED will be extinguished

2.Remote control：

Press the Key for 5 seconds, and let go until seeing the LED indicator flickering, then, press on

the single control button of remote controller, it means registering successfully when you hear

the sound of “D”, this button which you press on just will become effective after successful

registration.

Note: Both touch keys can’t be registered at the same time.

Ⅲ

ⅢⅢ

Ⅲ、

、、

、Technical Data:

Items Technical data

Rated Voltage 110V~125VAC, 60Hz

Rated Current 15A

Output Power Maximum resistive load: 1800W

PAGE 1
/2 PA- series Specification Ⅰ. The picture of the adaptor and the remote controller PA-US1-01RFP （WATERPROOF IP44） LED Indicator Single control button remote controller(SD-US2-RF) remote controller(SD-US1-RF) Ⅱ.User instruction 1. Press momentary on the Key, the LED indicator was lightened up when the socket-outlet become live, the socket-outlet is broke when this LED will be extinguished 2.
PAGE 2
/2 Maximum motor load: 1/3hp Maximum tungsten load: 1000W Receiving Sensitivity -100dBm SD-US1-RF parameter Battery: 27A 12VDC; Battery life: one year; remote control distance: ≥20m；Sending sensitivity≥-25dBm Controls up to 4 channels. SD-US2-RF parameter Battery: 23A 12VDC; Battery life: one year; remote control distance: ≥40m; Sending sensitivity≥-25dBm Controls up to 20 channels. Ⅳ、Attention 1.