Installation Instructions

Electric winch wireless controller instructions

A, Features Overview

The wireless receiver operates at 315 MHz and has a control range of more than 25 meters. It is used

for wireless control of electric winch

B, The wireless remote control parameters

1, Working voltage: DC7-18V.

2, The working current: 7mA ± 3mA

Receiving frequency

: 315MHz

C, Installation

and function

1,Disconnect Power to the winch

2,Confirm that the plug is the correct type for this winch and plug it in

3.Select an area for the receiver on the vehicle close enough to the winch to allow cable

connection

4.Investigate the chosen area to make sure no components will be damaged by installation.

5.Permanently (optional) mount the remote control receiver to the vehicle using appropriate

hardware (not included).

6.Preare the winch for operation as explained in its manual

7.Reconnect winch’s power

8.Release the clutch handle and pull out about 10 feet of wire rope Leave the wire rope

laying on the ground and stay clear of the wire rope and hook

9.Reengage the clutch handle

PAGE 1
Electric winch wireless controller instructions A, Features Overview The wireless receiver operates at 315 MHz and has a control range of more than 25 meters. It is used for wireless control of electric winch B, The wireless remote control parameters 1, Working voltage: DC7-18V. 2, The working current: 7mA ± 3mA 3, Receiving frequency : 315MHz C, Installation and function 1,Disconnect Power to the winch 2,Confirm that the plug is the correct type for this winch and plug it in 3.
PAGE 2
10.Watch the spool and wire rope and briefly, press the out button on the remote control to verify that the cable feeds out WARNING! If the cable does not feed out ,check and correct the winch’s wiring. Retest after correction. 11.Watch the spool and wire rope and briefly press the in button on the remote control to verify that the cable retracts WARNING! If the cable does not feed out ,check and correct the winch’s wiring .Retest BOTH functions after correction. 12.