Technical Specs

Technical specs/data for LED lamp wireless charger with pen holder

Specification:

Item no.: AST-WR162/12424901

1. Product size: wireless bottom part: 170.5*80.5*75.3mm; lamp length: 303mm; LED part: 44*99mm

2. Product weight: 164g

3. Input: DC9V-2A

4. Wireless Output:10W

5. LED Power:2W

Application range:

All mobile phones with wireless function

Instructions:

1) For wireless charger function:

The wireless charger can be plugged into suitable adaptor with a standard USB cable. When the cable is connected to the input

of the device, the red and blue indicator shall flash alternately for three times and then enter standby mode (red indicator keep

on), and then blue indicator shall be on and start charging once connecting with the mobile phone.

2) For wireless charger NTC and Other Protective Functions Available:

NTC protection shuts output off automatically if working temperature exceeds 65℃ and turns back on when temperature has

dropped back below 55℃ to keep the item from overheating. The blue indicator shall be flash once NTC works. Other safety

features included are over current, over voltage, over discharge, short circuit, and FOD protection.

FOD: when wireless charging, if the LED indicator is flashing blue, the device is either NOT a wireless charging device or there

is an object between the device and charging surface interfering with the charging process. It shall resume working once

removing the object.

3) For Led lamp function:

The Led lamp can be folded and adjusted according to your need; after power connected, the Led lamp shall be on when you

touch the button, there are three lights: the white light shall be fully on when first touch; the warm light shall be fully on when

second touch; and the white light shall be half-on when third touch. Touch again to turn off the LED lamp.

Features:

This product is a multi-functional wireless charger with LED lamp and pen holder with a fashionable design.

It can be very convenient for people with multiple usage.

It is compatible with most mobile phones with wireless function.

Durability is excellent, as it can charge over 500 times.

This item is suited for daily use, and can help you out if you are suddenly out of battery power.

Note:

Please check if the USB port and cable are connected properly when charging. If the connection is not stable, the device may

not charge because of a built-in IC (Short Circuit Protection) system. When the connection is established, it will resume

charging.

PAGE 1
Technical specs/data for LED lamp wireless charger with pen holder Specification: Item no.: AST-WR162/12424901 1. Product size: wireless bottom part: 170.5*80.5*75.3mm; lamp length: 303mm; LED part: 44*99mm 2. Product weight: 164g 3. Input: DC9V-2A 4. Wireless Output:10W 5. LED Power:2W Application range: All mobile phones with wireless function Instructions: 1) For wireless charger function: The wireless charger can be plugged into suitable adaptor with a standard USB cable.
PAGE 2
It is normal for the device to feel slightly warm when charging. Forbid knocking and beating the product. Do not put fingers or hands into the product. Keep the item away from fire, water and children. Please make sure the working condition of power bank between -10°C and 60°C. FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.