Users Manual

Plastic tab

This light string contains 24 bulbs,

end to end connect 2 sets(48 bulbs) max. Press if 2 sets connected.

On the Remote Control press the button “1S”, “2S” ( the “3S” should not be used). (Note: 1S, 2S stands for the Connection of 1

String or 2 Strings respectively - the “3S” should not be used) depending on the number of strings you are connecting together.

Remove insulator tab from the remote control before use. ( Please remove battery and clean surface of battery, then reset

battery if remove controller is not working after insulator tab was removed.)

String Light.

PAGE 1
String Light. This light string contains 24 bulbs, end to end connect 2 sets(48 bulbs) max. Press 2S if 2 sets connected. Plastic tab On the Remote Control press the button “1S”, “2S” ( the “3S” should not be used). (Note: 1S, 2S stands for the Connection of 1 String or 2 Strings respectively - the “3S” should not be used) depending on the number of strings you are connecting together. Remove insulator tab from the remote control before use.
PAGE 2
9.5 Watts max, 19 Watts max total. 0.39 Watts max S14 type lamp (provided with product). 1. The lights do not come on at all: (SKETCH 3.) a) Make sure the wall outlet and circuit breaker are on. b) Make sure all connectors are well connected and tightened. 2. One or more of the lamps has burned out. (SKETCH 1.) a) Disconnect power to the string light. Remove affected lamp by gently gripping lamp and then turning in a counter-clockwise direction. Replace lamps only with spare lamps provided.