En Introduction Preparation Basic Operation Organizing Images Saving Images to a Computer Advanced Operation Technical Notes Index (En) User's Manual
Trademark Information • Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and Quick Time are registered trademarks of Apple Computer, Inc. • Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc. • Microsoft and Windows are registered trademarks of Microsoft Corporation. • Internet is a trademark of Digital Equipment Corporation. • CompactFlash™ is a trademark of SanDisk Corporation. • Lexar Media is a trademark of Lexar Media Corporation.
Introduction Thank you for your purchase of the Nikon COOLWALKER MSV-01 digital photo storage viewer. This manual has been written to help you get the most out of your Nikon COOLWALKER MSV-01. To make it easier to find the information you need, the following symbols and conventions are used: This icon marks cautions, information that should be read before use to prevent damage to your COOLWALKER MSV-01. This icon marks notes, information that should be read before using your COOLWALKER MSV-01.
Do not place the strap around the neck of an infant or child Placing the case strap around the neck of an infant or child could result in strangulation. Introduction—For Your Safety Use only the specified batteries and AC adapter Using non-specified accessories may cause fire or an electric shock. Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations.
Observe proper precautions when using the AC adapter Introduction—For Your Safety Improper use of the AC adapter may result in electric shock or fire. Observe the following precautions when using the AC adapter with this product: • Do not disassemble, repair or modify the AC adapter. In the event of malfunction or should the AC adapter break open as the result of a fall or other accident, unplug and take the AC adapter to a Nikon-authorized service representative for inspection. • Keep dry.
Notices Introduction—Notices • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon’s prior written permission. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the improper use of this product.
Notice for customers in Canada ATTENTION This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law.
A built-in hard disk drive requires careful handling. Introduction—Notices This Product is a High-precision Device Containing Internal Hard Disk Drive. • Read "For Your Safety" and "Caring for Your COOLWALKER MSV-01" before use, and be very careful when handling the product. Damage to the hard disk drive will not only require high repair expenses, but can also cause corruption or irreversible loss of the stored data.
Table of Contents Introduction i Preparation Table of Contents For Your Safety ................................................................................................................... i Notices............................................................................................................................... iv 1 About the COOLWALKER MSV-01 .................................................................................... 1 Check the Package Contents............................
Advanced Operation 35 Table of Contents Viewing Pictures on TV ................................................................................................... 35 Copying Images to a Memory Card (Copy HDD ➡ CF card) .......................................... 36 Copying All Images in a Selected Folder .............................................................. 36 Copying a Selected Image ..................................................................................... 37 Printing Pictures.......
Preparation About the COOLWALKER MSV-01 The diagram below illustrates the functions of the MSV-01. Preparation—About the COOLWALKER MSV-01 Supported Image Data Formats • The COOLWALKER MSV-01 supports image data recorded with Nikon digital cameras (DCF format). • The COOLWALKER MSV-01 supports NEF (Nikon Electronic Image Format) files (RAW files containing embedded preview images).
Check the Package Contents Unpack the COOLWALKER MSV-01 box and check the contents to make sure that you have all the items listed below.
Parts of the COOLWALKER MSV-01 Main Unit HDD Access lamp (flashes during reading from or writing to the internal HDD) Preparation—Parts of the COOLWALKER MSV-01 Power-on lamp ( 10) Power switch ( 10) LCD Monitor Right function button (Right button) ( 6) Multi selector ( 6) Left function button (Left button) ( 6) Enter button ( 6) Memory card slot ( 12) Remote-control sensor ( 6) Memory card slot cover ( 12) 3
Preparation—Parts of the COOLWALKER MSV-01 DC-in connector ( Interface connector cover Audio/Video-out connector ( 35) USB connector ( 8) 30, 42) Interface connector cover Battery pack (Rechargeable Li-ion Polymer Battery EN-EL6) ( 8) Battery release button ( 8) Battery Release Button • Do not press the battery release button when charging the battery pack or when operating the MSV-01. • Make sure to turn the MSV-01 main unit off and disconnect the AC adapter before removing the battery pack.
Remote Control Unit Remote control transmitter Power OFF button ( 10) Rotate button Preparation—Parts of the COOLWALKER MSV-01 Left function button (Left button) ( 6) Right function button (Right button) ( 6) Multi selector ( 6) Enter button ( 6) Battery holder (CR2025 lithium battery) Before Using the Remote Control Unit Remove the Insulating Tape. The remote control unit is shipped with an insulating tape in the battery holder.
Navigating the Menus . Main menu Preparation—Navigating the Menus Right function button (Right button) Executes commands displayed bottom-right Left function button (Left button) Executes commands displayed bottom-left Enter button Remote Control Unit Multi selector Power off button Press to move cursor up. Press to move cursor down. Press Rotate button to display sub-menu. • In the list view: Press to open a folder ( 19). • In the list view: Press to close a folder ( 19).
The Main Menu When the MSV-01 is turned on, the monitor briefly displays a welcome screen, and then takes you to the main menu. Item Preparation—Navigating the Menus Memory Card Inserted Memory Card not Inserted Description Copy CF card ➡ HDD Copy all the data recorded within a memory card onto the MSV-01 hard disk drive. Play HDD images View image files stored on the MSV-01 hard disk drive. 14 Play CF card images View image files stored on a memory card.
Installing and Charging the Battery Pack Before Using the COOLWALKER MSV-01 Remove the Insulating Tape. The battery pack is shipped with an insulating tape over its terminal. (1) Remove the battery pack from the MSV-01 main unit following the instructions provided in the "Removing the Battery Pack" section below. Preparation—Installing and Charging the Battery Pack Insulating tape Terminals (2) Remove the insulating tape from the battery pack.
(2) Open the interface connector cover, and connect the supplied AC adapter to DC-in connector (➈). Plug the AC adapter into an outlet (➉). (3) Charging will begin immediately. While the battery is charging, the power-on lamp flashes in orange. Charging is complete when the orange power-on lamp stops flashing. An exhausted battery can be fully charged in about 4.5 hours. ➉ (4) Remove the AC adapter, while the MSV-01 is still off.
Power-ON/OFF To power the MSV-01 on, press and hold down the power switch ( 3) for about 2 seconds. The monitor will turn on showing the welcome screen, then it will switch to the main menu. To turn the MSV-01 off, press and hold down the power switch for about 2 seconds when the power-on lamp is on.
Setting Display Language 1 2 3 Highlight Language using press or and . 4 Highlight Deutsch (German), English, Español (Spanish), or Français (French), and press . Press MENU (Left button) to return to the main menu. The selected language will be set for menus and messages and the screen will return to the SET UP menu. 11 Preparation—Setting Display Language Press SET UP (Left button) to display the SET UP menu.
Basic Operation Inserting a Memory Card To copy image data from a memory card to the MSV-01 or from the MSV-01 to a memory card, insert a CompactFlash™ memory card into the memory card slot. 1 Turn the MSV-01 off Confirm that the monitor is off and the power-on lamp is off or, if the AC adapter is connected, is lit or flashing orange ( 10). Basic Operation—Inserting a Memory Card 2 Open the memory card slot cover Gently slide the memory card slot cover downwards to expose the memory card slot.
Copying Images from a Memory Card (Copy CF card ➡ HDD) Use Copy CF card ➡ HDD from the main menu to copy all data recorded within a memory card onto the MSV-01. 1 Insert a memory card into the memory card slot ( 12), then turn the MSV-01 on. The monitor will go on and display the main menu. When using the battery pack, check the battery level (indicated on the monitor) ( 10). 3 Highlight Copy CF card ➡ HDD using Press or Copying will begin immediately. "Copying...
Viewing Images Stored on the COOLWALKER MSV-01 (Play HDD images) Use Play HDD images from the main menu to view images stored on the MSV-01. 1 2 Basic Operation—Viewing Images Stored on the COOLWALKER MSV-01 (Play HDD images) Highlight Play HDD images using . or Press . You will see a list of folders stored on the hard disk. • The icon at the top of the screen represents the root folder on the MSV-01 hard disk. 3 4 Using or , highlight a folder.
9 Press (Left button) to return to thumbnail playback (Step 7). Press LIST (Left button) to return to the list view (Step 5), and then press MENU (Left button) to return to the main menu. Image Data Supported for Playback Viewing Images in Rotated Orientation In full-screen playback mode, still images can be displayed in rotated orientation. To change the orientation of a still image, press the Rotate button on the remote control unit ( 5).
Displaying Image Information Image information is superimposed on images displayed in full-screen playback ( There are five pages of image information for each image.
Taking a Closer Look: Playback Zoom Press to zoom in on a still image displayed in full-screen playback ( 14, 18). To increase zoom, press (Right button). Three steps of zoom are available (x2, x4, x8). Zoom is not available for RAW, TIFF or movie files. Zoom is not available when an image is displayed with superimposed Shooting Data 1, Shooting Data 2 or Histogram ( 16). While the image is zoomed-in, a zoom-in icon and zoom ratio are displayed in the top left corner of the monitor.
4 5 Press to display thumbnails of folders containing images. Using , , or select a folder. Basic Operation—Viewing Images Stored on a Memory Card (Play CF card images) 6 Press to display thumbnails of the images stored in the folder. 7 Select an image to play full-screen, moving the cursor (a yellow frame) with , , or on the multi selector. • The file name of the currently selected image is displayed bottom left. Press to view the image in full-screen playback.
Button Operations (List View and Image Playback) You can use the following button operations in the list view, thumbnail playback and full-screen playback modes. List View Highlight Play HDD images ( 14) from the main menu and press to display a list of folders stored on the MSV-01 hard disk drive. The following operations are available in the list view mode. To Press Description Highlight folders Press or folders. Open a folder Open a selected folder to list up sub-folders inside it.
Thumbnail Playback The following operations are available in the thumbnail view displayed after selecting Play HDD images ( 14) or Play CF card images ( 17). Basic Operation—Button Operations (List View and Image Playback) Play HDD images To Play CF card images Press Highlight images and sub-folders Press , images.
Full-Screen Playback The following operations are available in the full-screen view displayed after selecting Play HDD images ( 14) or Play CF card images ( 17). To Press Description View next image Press to view the next image. View previous image Press to view the previous image. Cycle through image information displayed Press to cycle through image information. Shooting information and histogram will be displayed ( 16).
Movie Playback You can play back a movie file displayed in full-screen playback mode, which can be accessed from the main menu using Play HDD images ( 14) or Play CF card images ( 17). Movies are indicated by and can be viewed by pressing available during movie playback. . The following operations are Basic Operation—Button Operations (List View and Image Playback) During playback To Press Description Start/ Pause/ Resume movie playback Press to start playback.
Organizing Images The EDIT Menu Using the items from the EDIT menu , which can be accessed from Play HDD images or Play CF card images, you can perform the following operations for a selected image file or folder. Item Description Delete the selected image file or folder. 24 Move Move the selected image file or folder to a new destination inside the MSV-01 HDD. 25 Copy Copy the selected image file or folder to a different destination folder inside the MSV-01 HDD.
Delete Use this option to delete an image file or folder selected in list view or thumbnail playback. If a folder is selected, all data inside the folder including images will be deleted. 1 2 Press EDIT (Right button) to display the EDIT menu ( 23), then using or highlight Delete. Press . A confirmation screen will be displayed. Organizing Images—The EDIT Menu 3 Using Press or select Yes to delete a file or folder, No to exit without deleting.
Move Use this option to move an image file or folder selected in list view or thumbnail playback, or the currently displayed image to a new destination inside the MSV-01. 1 2 Press EDIT (Right button) to display the EDIT menu ( 23), then using or highlight Move. Press . A list of the stored folders will appear. Using , , or select a destination folder. 3 Press . A confirmation screen will be displayed. highlight Yes or No. Using or Press option.
Copy Use this option to copy an image file or folder selected in list view or thumbnail playback, or the currently displayed image to a different destination folder inside the MSV-01. 1 2 Press EDIT (Right button) to display the EDIT menu ( 23), then using or highlight Copy. Press . A list of the stored folders will appear. Using , , or select a destination folder. Organizing Images—The EDIT Menu • To copy to the root level, select the root folder at the top of the list. 3 Press .
New folder Use this option to create and name a new folder in the selected folder. 1 2 Press EDIT (Right button) to display the EDIT menu ( 23), then using or highlight New folder. • To create a new folder at the root level, select the root folder at the top of the list. • If an image file is selected, the new folder will be created at the same level as the currently selected file. Input a name following the instructions provided in the "Name Input Screen Operations" section below.
Rename Use this option to rename a selected image file or folder. 1 2 Press EDIT (Right button) to display the EDIT menu ( 23), then using or highlight Rename. Press . The name input screen will be displayed. Organizing Images—The EDIT Menu Edit the name following the instructions provided in the "Name Input Screen Operations" section ( 27). After you have edited the name, press OK (Right button). The folder will be renamed and the monitor will return to the list view or playback display.
New Search Using this option you can search for image files created within a specified range of dates (usually, shooting date). Set the start date (first line in the displayed screen) and the end date (second line in the displayed screen) for the search. To Press Description Select year, month and day. Move cursor Move cursor. Start searching After selecting the end date, press Cancel CANCEL (Left button) to start searching. Cancel searching. 1. Select a year of the start date using or . 2.
Saving Images to a Computer Connect your MSV-01 to a computer to copy and save data stored on the MSV-01 to the computer. When connected to a computer using the provided USB interface cable UC-E9, the MSV-01 works as an external hard disk drive. In addition, the MSV-01 functions as a memory card reader ( 33). The MSV-01 supports the following operating systems: Windows XP Home Edition/Professional, Windows 2000, Windows Millennium Edition (ME), Windows 98 Second Edition (SE), Mac OS 9 (9.1 - 9.
3 The destination folder for Nikon COOLWALKER MSV-01 USB Drivers will be displayed under "Destination Folder." Click Install to begin the installation. • 4 Click Finish to complete the Nikon COOLWALKER MSV-01 USB Drivers installation. When the installation has completed, remove the MSV-01 Windows® 98 SE Driver Installer CD from the CD-ROM drive.
Connecting the USB Cable Turn the computer on and wait for the operating system to start up. Turn the MSV-01 off and connect it to your computer as shown below using the provided USB cable UC-E9. Saving Images to a Computer—Connecting the USB Cable Notes on Connecting to a Computer • • • • Place the MSV-01 on a flat and stable surface. When connecting the MSV-01 to a computer, use the DSA-0151F-05 AC adapter. Connect the MSV-01 directly to the computer; do not connect the cable via a USB hub or keyboard.
Copying Images to the Computer 1. To copy data stored on the MSV-01 HDD to the computer, make sure that no memory card is inserted in the MSV-01, then turn the MSV-01 on. The monitor of the MSV-01 will indicate that the unit is connected using USB interface, and your computer will recognize the MSV-01 as a Mass Storage device. 2. Copy images from the MSV-01 to your computer using computer operations.
Disconnecting the COOLWALKER MSV-01 Be sure to remove the MSV-01 from the system as shown below before disconnecting the USB cable and turning the MSV-01 off. Windows XP Home Edition/Professional Click the "Safely Remove Hardware" icon in the task bar and select Safely remove USB Mass Storage Device from the menu that appears. Windows 2000 Professional Click the "Unplug or Eject Hardware" icon in the task bar and select Stop USB Mass Storage Device from the menu that appears.
Advanced Operation Viewing Pictures on TV The supplied EG-CW1 audio/video (A/V) cable can be used to connect the MSV-01 to a television or VCR. Choosing a Video Mode The Video mode option in the MSV-01 SET UP menu offers a choice of NTSC and PAL standards ( 54). Be sure that the selected mode matches the standard used in the video device. 1 2 Turn the MSV-01 off Turn the MSV-01 off before connecting or disconnecting the A/V cable.
Copying Images to a Memory Card (Copy HDD ➡ CF card) Use this option to copy images that are stored on the MSV- 01 hard disk drive (HDD) onto the memory card. You can copy selected image files or all images in a selected folder. Copying All Images in a Selected Folder 1 Turn the MSV-01 off. Insert a memory card ( 2 12) into the memory card slot and turn the MSV-01 on. 3 Using or , highlight Copy HDD ➡ CF card from the main menu.
Copying a Selected Image 1 2 In Step 4 on page 36, from the displayed list, using , , or , select the sub-folder inside the DCIM folder that contains the image you want to copy. Press to display the contents of the selected folder in the thumbnail playback mode. Using , , or select a thumbnail of an image you want to copy. • To return to Step 1, press LIST (Left button). 3 4 A list of the folders stored on the memory card will appear.
Printing Pictures Images taken with a Nikon digital camera can be printed without using a computer. Highlight Print from the main menu and press to display the PRINT menu. The PRINT menu contains the following items: Item DPOF printset (JPEG images only) Description Create a digital print order with a standard of Digital Print Order Format (DPOF) for images in the memory card, setting number of prints and other options.
DPOF printset The DPOF printset option from the PRINT menu is used to create digital "print orders" for images stored on the memory card. It allows to select images for printing, set number of prints, date and shooting information imprinting. Insert a memory card into the MSV-01 before turning it on ( 1 12). 2 Turn the MSV-01 on and highlight Print using or . Press to display the Print menu. Highlight DPOF printset using or . • To return to the main menu, press MENU (Left button).
7 8 Press (+) to select the current image and set number of prints to 1. Use or to specify the number of prints (up to 9). • Press CANCEL (Left button) to cancel settings made in Steps 6 to 7. • To deselect an image, press the number of prints is 1. when • Repeat Steps 6 to 8 to select additional images. 9 10 Advanced Operation—DPOF printset Press SET (Right button) to complete selecting images and display menu of print options.
All images (Setting all images for DPOF printing) 1. To print one copy of each image on the memory card, select All images from the DPOF PRINTSET menu in Step 4 ( 39). 2. Select the date and shooting information print options performing Steps 9 to 10 ( complete your digital print order. 40) to Reset printorder To reset any DPOF print order on the memory card, select Reset printorder from the DPOF PRINTSET menu in Step 4 ( 39). In a confirmation screen displayed, select Yes and press to reset.
Printing Via Direct USB Connection (PictBridge) Use the supplied UC-E9 USB cable to connect the MSV-01 to a printer that supports PictBridge and print images (JPEG format) stored on the MSV-01 HDD or in a memory card directly from the MSV01, without connecting it to a computer. To print images stored on a memory card, insert the memory card into the MSV-01 before turning it on.
Before Starting Direct Printing • Check if your printer supports direct printing via direct USB connection (PictBridge). • Before beginning direct printing, confirm your printer settings. For information on setting the printer, refer to your printer documentation. Power Supply Source When printing via direct USB connection, use the provided DSA-0151-05 AC adapter to maintain continuous stable power supply. If using the battery pack, make sure it is sufficiently charged.
5 Set a number of prints for the selected image. • Use (+) or (-) to specify the number of prints (up to 9). • To deselect an image, press (-) when the number of prints for the image is 1. • Repeat Steps 3 to 5 to select additional images. 6 Advanced Operation—Printing Via Direct USB Connection (PictBridge) Press SET (Right button) in Step 5 to view thumbnails of the selected images. • Using , , your selection.
Printing Images Stored on a Memory Card 1 2 Highlight Print CF card images from the direct print menu ( 42) using or . 3 Press to go to the SELECT PRINT IMAGES screen. Use or to scroll through thumbnails of images shown in the top section of the monitor. The currently selected image is shown in the lower section of the monitor. • To return to Step 1, press CANCEL (Left button). 4 • The set number of prints is displayed on the selected images. • To deselect an image, press the number of prints is 1.
Printing Images Stored on a Memory Card Using DPOF Settings Use the DPOF print option to print images stored on a memory card, selected using the DPOF printset function of the MSV-01 ( 39) for printing via direct USB connection. 1 2 Highlight DPOF print from the direct print menu ( 42) using or . Press to view thumbnails of the images set for printing using the DPOF printset function. • Using , , or , browse through images to confirm your selection. • To return to Step 1, press BACK (Left button).
Finishing Direct Printing 1 2 Press DONE (Left button) in the direct print menu. "Disconnect printer" will be displayed. Disconnect the USB cable. To perform direct printing again, disconnect the USB cable and then repeat the operation from Step 1 in "Connecting to a Printer" ( 42). 3 Advanced Operation—Printing Via Direct USB Connection (PictBridge) When the USB cable is disconnected, the monitor returns to the PRINT menu. Press MENU (Left button) to return to the main menu.
Slideshow Use this option to playback images stored on the MSV-01 hard disk drive (HDD) in an automated "slideshow" sequence at approximately 3 seconds interval (initial settings). Highlight Slideshow from the main menu using SLIDESHOW menu: Menu Option or , and press to display the Description All images in HDD Play all images stored on the MSV-01. 48 Selected folder Play all images in the selected folder.
Playing All Images in a Selected Folder 1 2 Highlight Selected folder from the . SLIDESHOW menu using or Press . A list of folders stored on the MSV-01 HDD will be displayed. • Select a folder using • Use 3 or . to open a list of sub-folders, and to close the list. 4 After all images have been played, the monitor returns to the slideshow start screen. • On operations during the slideshow see ( 51). • Press MENU (Left button) to return to the main menu. • To start the slideshow again, press .
3 4 Press screen. to display the SELECT IMAGES Using or , scroll through images. The currently selected image is shown in the lower section of the monitor. • Press LIST (Left button) to return to the SELECT FOLDER screen. 5 6 Advanced Operation—Slideshow To select the currently displayed image for (ON). playing in the slideshow, press Press SET (Right button) to complete selection. • To deselect the image, press The slideshow start screen will be displayed.
Operations During the Slideshow When the slideshow is in progress, the following buttons are available for control. To Pause/ Press Description Press to pause at the current slide or resume the slideshow, if paused. Resume Move to the next slide When paused, press slide. to move to the next Return to the previous slide When paused, press slide. to return to the previous Quit the slideshow MENU (Left button) Quit the slideshow.
Set interval Use this option to set the time interval for how long each image is displayed during the slideshow. Highlight Set interval from the SLIDESHOW menu and press INTERVAL screen. to display the SLIDESHOW You can set the interval value in the range from 1 to 99 seconds. By default, the interval is set to 3 seconds. Press to increase the interval by one second, or Press to change the interval setting. to decrease the interval by one second. Press BACK (Left button) to abandon any change made.
The SET UP Menu The SET UP menu contains the following options: Option Description Brightness Adjust monitor brightness. Language Choose a language for menus and messages. Auto power off Choose how long the MSV-01 will remain on before turning off automatically. 54 Video mode Set the video output mode. 54 Format (CF card/ HDD) Format a memory card or the MSV-01 hard disk (HDD). 55 MENU (Left button) Return to the main menu.
Language Use this option to choose the language for menus and messages ( 11). Auto power off Set a period of inactivity before the Auto power off function automatically turns the MSV-01 off ( 10). By default, Auto power off is set to 1 minute. To disable the Auto power off function, select No limit. To Select Press / Advanced Operation—The SET UP Menu Set Description Select a desired setting from thirty seconds (30s), one minute (1m), five minutes (5m), thirty minutes (30m), or No limit.
Format (CF Card/HDD) Use the Format option from the SET UP menu ( 53) to format a memory card or the MSV-01 hard disk (HDD). Formatting memory cards or the MSV-01 HDD will delete all data they contain. 1 Highlight CF Card or HDD using or and press . • To exit without formatting press CANCEL (Left button). 2 3 • To return to Step 1, highlight No and press . • To exit without formatting press CANCEL (Left button).
The INFORMATION Screen Displaying Memory Information This screen shows the remaining free memory space in, and the total capacities of, the MSV-01 internal hard disk drive (HDD) and memory cards. Use this screen to check the memory capacity before copying new data. To display the information, press INFO. (Right button) in the main menu. Firmware ver. The current firmware version of the MSV-01. HDD Free/Total Free space on/Total capacity of the MSV-01 hard disk drive.
Technical Notes Optional Accessories At the time of writing, the following optional accessories were available for the COOLWALKER MSV-01. Contact your retailer or Nikon local representative for details.
Caring for Your COOLWALKER MSV-01 To ensure continued enjoyment of your Nikon product, observe the following precautions when storing or using the device: Cautions This product is a high-precision device containing internal hard disk. It requires careful handling. Damage to the hard disk will not only require high repair expenses, but can also cause corruption or irreversible loss of the stored data. • Do not subject to strong shocks or impacts.
Make a backup of your data if submitting this product for repair All data stored on the hard disk may be erased during repair. Be sure to make a backup of the data stored on the hard disk before submitting the device for repair. Be sure to remove a memory card and keep it in a safe place. Do not use, transport or store the device with the battery pack removed Failure to observe this precaution could result in malfunctions or damage the MSV-01.
Batteries Charge the battery pack of the main unit before using. • Rechargeable Lithium-ion Polymer Battery EN-EL6 is used as the main unit battery pack. • Connect the AC adapter and charge the rechargeable battery pack before using the device. The supplied rechargeable battery pack is only partially charged and needs recharging before using it for the first time. • After long periods during which the battery pack has not been used, the battery pack should be charged before using it.
Cleaning Storage Body Turn the MSV-01 off and remove the AC adapter when not in use. Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using your MSV-01 at the beach or seaside, wipe off any sand or salt with a cloth lightly dampened with fresh water, then dry thoroughly. LCD Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply excessive pressure.
Error Messages This section lists the error messages that appear on the monitor when there is a problem with the MSV-01. Consult the list below before contacting your retailer or Nikon representative. Display Problem Solution CARD IS NOT FORMATTED Memory card has not been formatted for use in camera or MSV-01. Format card using your camera. NO CARD PRESENT MSV-01 cannot detect memory card. Turn power off and confirm that memory card is correctly inserted.
Display Problem NO IMAGE FILE EXISTS. Folder(s) selected for playback contain(s) no supported images. CANNOT DISPLAY • • MSV-01 does not support this file format. Image size exceeds supported dimensions. Solution • • • Select a folder containing images from list view or thumbnail playback mode. Insert memory card containing images, or copy images to MSV-01 HDD. The image cannot be displayed on MSV-01. View file on computer or camera used for shooting.
Troubleshooting If your MSV-01 fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers listed in the right-most column for information on solving the problems listed here. Electronically-controlled devices In extremely rare instances, the MSV-01 may fall in unoperatable state (freeze during operation). Press the power switch to turn the MSV-01 off.
Specifications Type Digital Photo Storage Viewer MSV-01 Storage media Type 2.5" internal HDD Storage Capacity 30GB (1 KB = 1000 Bytes) *1 Type I and II CompactFlash™ memory cards; Microdrives Monitor 2.
Computer system requirements • • Set DPOF Print Order function Interface: built-in USB ports (The MSV-01 may not function as expected when connected to a USB hub.) Operating system: Windows XP Home Edition/Professional, Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE) *6; Mac OS 9.1 - 9.2, Mac OS X (Version 10.1.2 or later). Only preinstalled versions are supported.
Index Symbols (Battery status icon), 10 (Movie icon), 16 (Print order icon), 16, 40 (Unsupported data icon), 15 (Voice memo icon), 16 (Zoom in icon), 17 A AC adapter, 2, 9 - 10, 43, 59 See also Power switch; Power-on lamp Access lamp, see HDD, access lamp All images, 41 See also DPOF printset All images in HDD, 48 APERTURE, see Image information Audio/Video (A/V) cable, 2, 10 connecting, 35 Audio/Video-out connector, 4, 35 Auto power off (SET UP menu), 10, 53 - 54 B C Camera, 1 CAMERA (Camera type), see
I O Image data formats, supported, 1, 15, 22, 66 Image information, 16, 21 INFO.
SELECT IMAGES, 50 Select images, 39 See also DPOF SELECT PRINT IMAGES, 39 - 40, 43, 45 Selected folder (SLIDESHOW menu), 48 - 49 Selected images (SLIDESHOW menu), 49, 50 SENSITIVITY, see Image information Set interval (SLIDESHOW menu), 52 SET UP, 7, 10, 53 SET UP menu, 53 - 55 Shooting Data, 16, 46 See also Shooting info. Shooting info.
Printed in Japan BG4G01200201(11) 6MAW1411-A