Forestry Pro Instruction manual En
English......................................... p.4-p.
Cautions before use En En English CONTENTS Cautions before use ........................................................ 5-7 Key features ........................................................................ 8-9 Nomenclature/Composition .......................................... 10 Changing batteries ............................................................ 11 Internal display.............................................................. 12-13 Operational Summary......................................
Cautions before use En objective side. Please observe the following guidelines strictly so you can use • Do not aim at the eye. the equipment properly and avoid • Do not operate the unit with other additional optical elements, such as potentially hazardous problems. lenses or binoculars. Using an optical Before using this product, read instrument together with the Nikon thoroughly the “SAFETY AND Laser Forestry Pro increases the danger OPERATION PRECAUTIONS” and of damaging the eyes.
Key Features En En • Linear distance measurement range: 10-500 meters/11-550 yards/33-999 feet. • Angle measurement range: ±89° • Distance measurement display step: [Internal Display]: (Linear Distance) 0.5 meter/yard, 1 foot (measurement distance is less than 100 meters/yards /feet) 1.0 meter/yard, 1 foot (measurement distance is 100 meters/yards/feet or further) (Horizontal Distance/Height) 0.2 meter/yard, 0.
Nomenclature/Composition Changing Batteries En 5 4 1 6 2 7 8 !e 3 1 Monocular objective lens/ Laser emission aperture 2 Laser detector aperture 3 External LCD 4 MODE button 5 POWER button 6 6x monocular eyepiece 7 Eyecup/dioptre adjustment ring 8 Dioptre index 9 Strap eyelet !p Battery chamber cover !q Battery chamber cover “Open/Close” indication !w Product number/explanatory label 9 !p !q !w Composition Body ............................................... x1 Soft case (CCN)......................
Internal display En 1. 『 『 『 』- Target aiming/Laser irradiate system 』- Aim at the target. Position the target at the center of the reticle. 』- Appears while the laser is being used for a measurement. (Remains present during single measurement. Blinks during continuous measurements.) Warning: Do not look into the objective lenses when this mark is shown. 』- Distance/measurement status display 2.『 Digitally indicates measured distance in meters/yards/feet and angles in degrees.
Operational Summary En Caution—use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure LCD is illuminated ◎ Set your desired modes Align the reticle with the target ☆ For continuous distance and angle measurement (up to 20 seconds), keep button depressed. POWER Successfully measured Fail to measure Cannot measure Note: See the chapter "External and Internal display" for external LCD panel.
Operational Summary En Specifications 7. Switching Target priority modes (Factory default setting is Distant Target Priority mode.) First Target Priority ] [ Distant Target Priority ] [ 1. LCD panel should be on. 2. Press and hold MODE button, then depress and hold POWER button within 0.5 second. Note) If the POWER button is not pressed within 0.5 second, the display unit (m/yd/ft) will be switched. Note: I f buttons are not pressed in the correct order, switching will not take place.
Specifications En Others Operating temperature (˚C) Power source Dimensions (L x H x W) (mm) Weight (g) Structure Safety EMC Environment Laser Class Wavelength (nm) Pulse duration (ns) Output (W) Beam divergence (mrad) Operating humidity (%RH) External display En -10 — +50 CR2 lithium battery x 1 (DC 3V) Auto power shutoff function equipped (after approx. 30 seconds) 130x69x45 Approx.
External display En Vertical separation (height between two points) mode [Results] After measuring two points, "Linear distance to two points" and "Vertical separation (height) and angle between two points" are displayed. Units can be shown in meters, yards or feet. Angles are indicated by °(degree).
Operation and internal display 【3】Linear distance mode En 【1 • 2】Power On/Off and mode settings Operation/Results Work Button Power On Measurement standby Initial screen POWER Display Display examples 1 Measurement standby 2 Selecting and setting modes Last Use mode symbol (1) Linear distance【3】 (2) Horizontal distance【4】 MODE n/a (3) Height (from horizontal)【5】 MODE n/a (4) Angle (from horizontal)【6】 MODE n/a (5) Vertical separation (height between two points)【7】 MODE blinks
Operation and internal display 【5】Height mode En 【4】Horizontal distance mode Operation/Results 4 4-1 Button Display Seeking your target (Align the reticle with target) 5 Measurement (Laser irradiate symbol is displayed.) 4-3 Failure to measure 4-4 Measurement OK 9 Power off 5-1 Horizontal distance With the POWER button depressed, continuous measurement is possible for up to 20 seconds. (When done, 4-3 display appears.) Repeat step 4-1. Horizontal distance Follow by 4-1.
Operation and internal display En Display examples Display examples Operation/Results 6 6-1 6-2 Measurement (Laser irradiate symbol is displayed.) 6-3 Failure to measure 6-4 Measurement OK 9 Work Button Display meter yards Elevation (˚) Depression (˚) Measurement with Angle mode Seeking your target (Align the reticle with target) Power off Angle (from horizontal) With the POWER button depressed, continuous measurement is possible for up to 20 seconds. (When done, 6-3 display appears.
Operation and internal display Others En【8】Three-point measurement (height between two points) mode En Display examples Operation/Results Work Button Display meter yards feet Elevation (˚) Depression (˚) 8 Measurement with Three-point measurement (height between two points) mode 8-1 Seeking your target (Align the reticle with target) 8-2 Measurement (Laser irradiate symbol is displayed.) 8-3 Failure to measure Follow by 8-1 Repeat 8-1, 8-2, 8-3 until measurement is complete.
Troubleshooting/Repair En En If your Nikon Laser Forestry Pro should require repair, please contact your local dealer for details regarding where to send it. Before doing so, you are advised to consult the Troubleshooting Table below. Symptom Unit does not turn on — LCD fails to illuminate Target range cannot be obtained [- - -] (“Cannot measure”) appears 30 Check Points • Depress POWER button. • Check and replace batteries if necessary.
How to use the Rangefinder case En En Regular case Case with belt loop Upper flap Belt Upper flap Lower flap Lower flap ② ① ③ 32 1) Open the lower flap and divide into its two parts. ① 2) Attach the tip of the upper flap to the lower flap. ② 3) Secure the upper flap by clipping together the two parts of the lower flap.
34 35
NIKON VISION CO., LTD.