No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. DIGITAL CAMERA User's Manual Printed in Thailand En 6MB38411-01 • Read this manual thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page xii). • After reading this manual, keep it in a readily accessible place for future reference.
Get SnapBridge Now! Use SnapBridge to control the camera remotely from your smartphone or tablet (smart device) and download pictures from the camera. Download It Free Today! SnapBridge is available free-of-charge from the Apple App Store®, Google Play™, and the following website: http://snapbridge.nikon.com Visit the Nikon website for the latest SnapBridge news.
Enhance your imaging experience with SnapBridge. Download photos from your camera to your smart device via an “always on” connection, making online photo sharing easier and less stressful than ever. Upload photos and thumbnails to the NIKON IMAGE SPACE cloud storage service.
To get the most from your camera, please be sure to read all instructions thoroughly and keep them where they will be read by all who use the product. Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used: D This icon marks cautions; information that should be read before use to prevent damage to the camera. A This icon marks notes; information that should be read before using the camera.
Nikon User Support for India and Australia Contact a Nikon representative for technical assistance with the operation of your Nikon product or products. For information on the Nikon representatives in your area, visit http://www.nikon-asia.com/ support. ❚❚ The Menu Guide For more information on menu options and subjects such as how to connect the camera to a printer or television, download the camera Menu Guide from the Nikon website as described below.
Package Contents Be sure all items listed here were included with your camera.
Table of Contents Package Contents ....................................................................... iv For Your Safety ........................................................................... xii Notices......................................................................................... xvi Introduction 1 Getting to Know the Camera ..................................................... 1 The Camera Body...................................................................................
Tutorial 41 Camera Menus: An Overview ................................................... 41 Using Camera Menus......................................................................... 42 The Battery Level and Number of Exposures Remaining ... 46 Basic Photography and Playback 48 “Point-and-Shoot” Photography (i and j Modes)............ 48 Tips for Live View................................................................................. 56 Basic Playback.................................................
Release Mode 86 Choosing a Release Mode......................................................... 86 Self-Timer Mode (E) .................................................................. 89 Mirror up Mode (MUP) ................................................................. 91 Image Recording Options 93 Image Area .................................................................................. 93 Image Quality..............................................................................
White Balance 130 White Balance Options ........................................................... 130 Fine-Tuning White Balance ................................................... 134 Choosing a Color Temperature............................................. 137 Preset Manual .......................................................................... 139 Viewfinder Photography ............................................................... 139 Live View (Spot White Balance)................................
Recording and Viewing Movies 179 Recording Movies .................................................................... 179 Using the i Button........................................................................... 183 The Live View Display: Movies ..................................................... 185 Viewing and Hiding Indicators .................................................... 187 Frame Size, Frame Rate, and Movie Quality............................ 188 Indices.................................
Protecting Photographs from Deletion .............................. 242 Rating Pictures ......................................................................... 243 Rating Individual Pictures ............................................................. 243 Rating Multiple Pictures................................................................. 244 Selecting Photos for Upload.................................................. 245 Selecting Individual Photos..................................................
Caring for the Camera ............................................................. 288 Storage ................................................................................................. 288 Cleaning ............................................................................................... 288 Image Sensor Cleaning................................................................... 289 Caring for the Camera and Battery: Cautions..................... 296 Troubleshooting............................
For Your Safety To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. Keep these safety instructions where all those who use this product will read them. DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury. WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
• Do not directly view the sun or other bright light source through the lens or camera. Failure to observe this precaution could result in visual impairment. • Do not aim the flash or AF-assist illuminator at the operator of a motor vehicle. Failure to observe this precaution could result in accidents. • Keep this product out of reach of children. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard.
• Turn this product off when its use is prohibited. Disable wireless features when the use of wireless equipment is prohibited. The radio-frequency emissions produced by this product could interfere with equipment onboard aircraft or in hospitals or other medical facilities. • Remove the battery and disconnect the AC adapter if this product will not be used for an extended period. Failure to observe this precaution could result in fire or product malfunction.
WARNING (Batteries) • Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention. • Do not immerse batteries in water or expose to rain. Failure to observe this precaution could result in fire or product malfunction. Immediately dry the product with a towel or similar object should it become wet. • Discontinue use immediately should you notice any changes in the batteries, such as discoloration or deformation.
Notices • No part of the manuals included • Nikon will not be held liable for any with this product may be damages resulting from the use of reproduced, transmitted, this product. transcribed, stored in a retrieval • While every effort has been made to system, or translated into any ensure that the information in these language in any form, by any means, manuals is accurate and complete, without Nikon’s prior written we would appreciate it were you to permission.
Notices for Customers in the U.S.A. The Battery Charger IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.
Power Cable At voltages over AC 125 V (U.S.A. only): The power cable must be rated for the voltage in use, be at least AWG no. 18 gauge, and have SVG insulation or better with a NEMA 6P-15 plug rated for AC 250 V 15 A. Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law.
Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
D Use Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY.
❚❚ Bluetooth and Wi-Fi (Wireless LAN) This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change). The use of wireless devices may be prohibited in some countries or regions.
FCC/IC RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used.
Security Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if security is not enabled: • Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information. • Unauthorized access: Unauthorized users may gain access to the network and alter data or perform other malicious actions.
Introduction Getting to Know the Camera Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual. The Camera Body Release mode dial ........................ 86 Mode dial...........................................6 Eyelet for camera strap................ 19 Mode dial lock release....................6 Release mode dial lock release ............................................
The Camera Body (Continued) 1 Built-in flash...........................55, 159 2 Stereo microphone ........... 183, 259 3 AF-assist illuminator ............52, 261 Self-timer lamp ..............................89 Red-eye reduction lamp .............................................. 160, 162 4 Mirror.......................................91, 292 5 Lens mounting mark ....................24 6 M/Y button .............. 159, 161, 167 7 Infrared receiver.......................... 176 8 D button..................
1 2 3 4 5 Sub-command dial.....................266 6 Power connector cover Fn1 button ...........................266, 267 7 Tripod socket Fn2 button ...........................266, 267 8 CPU contacts Battery-chamber cover .........21, 23 9 Lens mount ........................... 24, 116 Battery-chamber cover 10 AF coupling latch ..........................................21, 23 11 Body cap ...........................
The Camera Body (Continued) 1 2 3 4 5 6 7 8 9 10 11 12 4 O/Q button.................60, 247, 268 K button ...............................59, 225 Tilting monitor ...............12, 14, 269 G button............................41, 250 L/U button ...........42, 130, 242 X/T button ...... 57, 97, 99, 240 W/Z button .................... 123, 225 R button............................. 187, 201 Viewfinder eyepiece ................ 9, 11 Eye sensor........................................13 Rubber eyecup ..........
A LCD Illuminators Rotating the power switch toward D activates the standby timer and control panel backlight (LCD illuminator), allowing the display to be read in the dark. After the power switch is released, the illuminators will remain lit for a few seconds while the standby timer is active or until the shutter is released or the power switch is rotated toward D again. Power switch D The Speaker Do not place the speaker in close proximity to magnetic devices.
The Mode Dial The camera offers the modes listed below. To choose a mode, press the mode dial lock release and rotate the mode dial. Mode dial Mode dial lock release 1 P, S, A, and M modes: P—Programmed auto...........73 S—Shutter-priority auto ......74 A—Aperture-priority auto ...75 M—Manual..............................76 2 Auto modes: i Auto ......................................48 j Auto (flash off)....................48 3 Special effects modes ..................64 4 U1 and U2 modes....................
A Beeps During Live View A beep may sound if you rotate the mode dial during live view. This does not indicate an error or malfunction.
The Control Panel The control panel shows a variety of camera settings when the camera is on. The items shown here appear the first time the camera is turned on; information on other settings can be found in the relevant sections of this manual. Shutter speed ..........................74, 76 Aperture (f-number)..............75, 76 ISO sensitivity .............................. 118 Number of exposures remaining.......................................47 5 Battery indicator ............................
The Viewfinder 1 Special effects mode indicator......................................... 64 2 Monochrome indicator ...... 64, 148 3 AF area brackets......................11, 51 4 “No memory card” indicator...... 21 5 1.3× DX crop ............................93, 94 6 Framing grid (displayed when On is selected for Custom Setting d6, Viewfinder grid display) ...264 7 8 9 10 11 12 13 14 Focus points..................52, 107, 260 1.3× DX crop indicator ..........93, 94 Pitch indicator 1 Flicker detection ...
Shutter speed ..........................74, 76 25 Exposure indicator ........................77 Exposure compensation Aperture (f-number)..............75, 76 display.......................................... 127 HDR indicator .............................. 156 26 Flash compensation Exposure/flash bracketing indicator ..................................... 167 indicator ...................................... 210 WB bracketing indicator ........... 215 27 Exposure compensation indicator .......................
The Diopter Adjustment Control Rotate the diopter adjustment control until the AF area brackets are in sharp focus. When operating the control with your eye to the viewfinder, be careful not to put your fingers or fingernails in your eye.
Using the Tilting Monitor The monitor can be angled as shown below. Normal use: The monitor is normally used in storage position. Low-angle shots: Tilt the monitor up to take shots in live view with the camera held low. High-angle shots: Tilt the monitor down to take shots in live view with the camera held high.
D Using the Monitor Rotate the monitor gently, stopping when you feel resistance. Do not use force. Failure to observe these precautions could damage the camera or monitor. If the camera is mounted on a tripod, care should be taken to ensure that the monitor does not contact the tripod. Do not lift or carry the camera by the monitor. Failure to observe this precaution could damage the camera. If the monitor is not being used to take photographs, return it to the storage position.
Using the Touch Screen The touch-sensitive monitor supports the following operations: Flick Flick a finger a short distance left or right across the monitor. Slide Slide a finger over the monitor. Stretch/Pinch Place two fingers on the monitor and move them apart or pinch them together.
❚❚ Using the Touch Screen During playback (0 228), the touch screen can be used to: • View other images • Zoom in or out • View thumbnails • View movies During live view, the touch screen can be used to take pictures (touch shutter; 0 16) or to measure a value for spot white balance (0 143). The touch screen can also be used for typing (0 270) or navigating the menus (0 45).
❚❚ Touch Photography (Touch Shutter) Touch the monitor to focus and lift your finger to take the photograph. Tap the icon shown in the illustration to choose the operation performed by tapping the monitor in shooting mode. Choose from the following options: Option Description Touch the monitor to position the focus point and focus (autofocus only; the touch shutter can not be used to focus when the (Touch shutter/AF: focus-mode selector is rotated to M to select 8 On) manual focus).
D Taking Pictures Using Touch Shooting Options The shutter-release button can be used to focus and take pictures even when the 8 icon is displayed to show that touch shooting options are active. Use the shutter-release button to take photographs in continuous shooting mode (0 86) and during movie recording. Touch shooting options can be used only to take pictures one at a time in continuous shooting mode and can not be used to take photographs during movie recording.
The Multi Selector In this manual, operations using the multi selector are represented by 1, 3, 4, and 2 icons.
First Steps Attach the Camera Strap Attach the strap securely to the camera eyelets. Charge the Battery Insert the battery and plug the charger in (depending on the country or region, the charger comes with either an AC wall adapter or a power cable). An exhausted battery will fully charge in about two hours and 35 minutes. • AC wall adapter: Insert the AC wall adapter into the charger AC inlet (q). Slide the AC wall adapter latch as shown (w) and rotate the adapter 90 ° to fix it in place (e).
• Power cable: After connecting the power cable with the plug in the orientation shown, insert the battery and plug the cable in. The CHARGE lamp will flash while the battery charges.
Insert the Battery and a Memory Card Before inserting or removing the battery or memory cards, confirm that power switch is in the OFF position. Insert the battery in the orientation shown, using the battery to keep the orange battery latch pressed to one side. The latch locks the battery in place when the battery is fully inserted. Battery latch Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place.
D Memory Cards • Memory cards may be hot after use. Observe due caution when removing memory cards from the camera. • Turn the power off before inserting or removing memory cards. Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card.
❚❚ Removing the Battery and Memory Cards Removing Memory Cards After confirming that the memory card access lamp is off, turn the camera off, open the memory card slot cover, and press the card in to eject it (q). The card can then be removed by hand (w). 16GB Removing the Battery To remove the battery, turn the camera off and open the battery-chamber cover. Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand.
Attach a Lens Be careful to prevent dust from entering the camera when the lens or body cap is removed. The lens generally used in this manual for illustrative purposes is an AF-S DX NIKKOR 18– 140mm f/3.5–5.6G ED VR. Remove the camera body cap Remove the rear lens cap Mounting mark (camera) Align the mounting marks Mounting mark (lens) Rotate the lens as shown until it clicks into place Be sure to remove the lens cap before taking pictures.
A Detaching the Lens Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the lens caps and camera body cap. D CPU Lenses with Aperture Rings In the case of CPU lenses equipped with an aperture ring (0 280), lock aperture at the minimum setting (highest f-number).
Turn the Camera On When you first turn the camera on, you will be prompted to choose a language using the multi selector and J button. A connection wizard will be displayed; to pair the camera and smart device, proceed to “Connecting Using SnapBridge” (0 28). To proceed without using SnapBridge to pair the camera with the smart device, press G and use the multi selector and J button to set the camera clock. No other operations can be performed until the clock is set.
q w Select time zone e Select date format r Select daylight saving time option Set time and date (note that camera uses a 24-hour clock) D Restarting Pairing at a Later Date If you don’t finish pairing the first time you turn the camera on, you can start pairing at any time by selecting Connect to smart device in the camera setup menu (0 272).
Connecting Using SnapBridge Use SnapBridge to control the camera remotely from your smart device and download pictures from the camera. A More on SnapBridge For more information, use the online help feature in the SnapBridge app. A Standby Timer/Auto Off Until you are familiar with SnapBridge and your camera, we recommend choosing a longer standby timer (0 263).
Android Android users can follow the steps below. If you are using an iOS device, proceed to “iOS” (0 33). 1 Camera: Press J when the connection Connection wizard wizard is displayed. When the camera prompts you to launch SnapBridge, proceed to Step 2. Launch prompt 2 Smart device: Launch SnapBridge on your smart device and tap the camera name. D Camera Name Not Displayed The camera name may not be listed if SnapBridge is started before the camera displays the launch prompt.
3 Camera/smart device: Check the authentication code. • Camera: The authentication code is displayed in the camera monitor. • Smart device: Check that the authentication code shown in SnapBridge is the same as that displayed by the camera.
The following step involves both the camera and the smart device. Have them ready side-by-side before proceeding. 4 Camera/smart device: Press J on the camera and tap PAIR in SnapBridge (the PAIR button may be labelled differently depending on what version of the operating system you are using). If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed. • Camera: Press J and return to Step 1.
6 Camera: Follow the on-screen instructions to complete the setup process. To record location data with photographs, select Yes when prompted and enable the location data features both in the SnapBridge app and on the smart device itself (for more information, see the documentation provided with the smart device). You can also synchronize the camera clock to the time reported by the smart device by selecting Yes when prompted and enabling synchronization in the SnapBridge app.
iOS Users of iOS devices can follow the steps below. Refer to “Android” (0 29) if you are using an Android device. 1 Camera: Press J when the connection Connection wizard wizard is displayed. When the camera prompts you to launch SnapBridge, proceed to Step 2. Launch prompt 2 iOS device: Launch SnapBridge on your iOS device and tap the camera name. D Camera Name Not Displayed The camera name may not be listed if SnapBridge is started before the camera displays the launch prompt.
3 iOS device: A confirmation dialog will be displayed; read the pairing instructions carefully and tap Understood. 4 iOS device: When prompted to select an accessory, tap the camera name again.
The following step involves both the camera and the smart device. Have them ready side-by-side before proceeding. 5 Camera/iOS device: Press J on the camera and tap Pair in SnapBridge (the Pair button may be labelled differently depending on what version of the operating system you are using). If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed. • Camera: Press J and return to Step 1.
6 Camera/iOS device: Follow the on-screen instructions. • Camera: Press J to complete pairing and proceed with camera setup. • Smart device: Follow the on-screen instructions to sign up for a Nikon ID. 7 Camera: Follow the on-screen instructions to complete the setup process.
❚❚ Forgetting Bluetooth Devices If pairing fails in Step 5, you may need to request iOS to “forget” the camera as described below, as otherwise the camera name may not be displayed or tapping the camera name will not start pairing when you return to Step 2. 1 Open iOS settings. 2 Tap Bluetooth. 3 Tap the icon to the right of the camera name. 4 Tap the “forget” option and repeat the pairing process from the beginning.
A Trouble Downloading (Android/iOS)? If download is slow or you experience other problems copying pictures from the camera to your smart device, try ending and restarting pairing. 1 Smart device: Open the Connect tab, select Connection options, tap End pairing, and tap Yes when prompted. 2 Camera: Display the SnapBridge launch prompt by selecting Connect to smart device in the setup menu and following the on-screen instructions. Launch prompt 3 Smart device: Select Connection options in the Connect tab.
The Wi-Fi Prompt (iOS) SnapBridge normally connects to the camera via Bluetooth, but switches to Wi-Fi as required for remote photography or when downloading high volumes of data. Before switching to Wi-Fi, SnapBridge will prompt you to enable the Wi-Fi connection on your iOS device. Follow the steps below. 1 Tap Go when prompted. The camera SSID and password will be displayed; make a note of the SSID and password before continuing. 2 Tap < Settings to display iOS settings. 3 Tap Wi-Fi.
5 If prompted for a password, enter the password you noted in Step 1 (you can also check the password at any time by selecting Wi-Fi > Network settings > Password in the setup menu). Passwords are casesensitive. Once you have entered the password, you will not be prompted to do so again unless the password has changed in the interim.
Tutorial Camera Menus: An Overview Most shooting, playback, and setup options can be accessed from the camera menus. To view the menus, press the G button. G button Tabs Choose from the following menus: • D: Playback (0 250) • C: Photo Shooting (0 252) • 1: Movie Shooting (0 257) • A: Custom Settings (0 260) • B: Setup (0 268) • N: Retouch (0 275) • O/m: MY MENU or RECENT SETTINGS (defaults to MY MENU; 0 278) Slider shows position in current menu. Current settings are shown by icons.
Using Camera Menus ❚❚ Menu Controls You can navigate the menus via the touch screen or using the multi selector and J button. 1: Move cursor up J button: select highlighted item 4: Cancel and return to previous menu 2: Select highlighted item or display sub-menu 3: Move cursor down A The d (Help) Icon If a d icon is displayed at the bottom left corner of the monitor, a description of the currently selected option or menu can be displayed by pressing the L (U) button.
❚❚ Navigating the Menus Follow the steps below to navigate the menus. 1 Display the menus. Press the G button to display the menus. G button 2 Highlight the icon for the current menu. Press 4 to highlight the icon for the current menu. 3 Select a menu. Press 1 or 3 to select the desired menu. 4 Position the cursor in the selected menu. Press 2 to position the cursor in the selected menu.
5 Highlight a menu item. Press 1 or 3 to highlight a menu item. 6 Display options. Press 2 to display options for the selected menu item. 7 Highlight an option. Press 1 or 3 to highlight an option. 8 Select the highlighted item. Press J to select the highlighted item. To exit without making a selection, press the G button. Note the following: • Menu items that are displayed in gray are not currently available.
❚❚ Using the Touch Screen You can also navigate the menus using the following touch screen operations. Scroll Slide up or down to scroll. Choose a menu Tap a menu icon to choose a menu. Select options/ adjust settings Tap menu items to display options and tap icons or sliders to change. To exit without changing settings, tap 6.
The Battery Level and Number of Exposures Remaining ❚❚ Battery Level The battery level is shown in the control panel and viewfinder. Control panel Control panel L K J I H 46 Viewfinder Viewfinder Description — Battery fully charged. — — Battery partially discharged. — d H d (flashes) (flashes) Low battery. Charge battery or ready spare battery. Shutter release disabled. Charge or exchange battery.
❚❚ Number of Exposures Remaining The control panel and viewfinder show the number of photographs that can be taken at current settings (values over 1000 are rounded down to the nearest hundred; e.g., values between 2100 and 2199 are shown as 2.1 k).
Basic Photography and Playback “Point-and-Shoot” Photography (i and j Modes) This section describes how to take photographs in i and j modes. i and j are automatic “point-and-shoot” modes in which the majority of settings are controlled by the camera in response to shooting conditions; the only difference between the two is that the flash will not fire in j mode. 1 Turn the camera on. The information display and control panel will light.
2 Pressing the mode dial Mode dial lock release on top of the camera, rotate the mode dial to i or j. Mode dial lock release Photographs can be framed in the viewfinder or in the monitor (live view). To start live view, rotate the live view selector to C and press the a button.
3 Ready the camera. Viewfinder photography: When framing photographs in the viewfinder, hold the handgrip in your right hand and cradle the camera body or lens with your left. Bring your elbows in against the sides of your chest. Live view: When framing photographs in the monitor, hold the handgrip in your right hand and cradle the lens with your left. A Framing Photographs in Portrait (Tall) Orientation When framing photographs in portrait (tall) orientation, hold the camera as shown below.
4 Frame the photograph. Viewfinder photography: Frame a photograph in the viewfinder with the main subject in the AF area brackets. AF area brackets Live view: At default settings, the camera automatically detects faces and selects the focus point. If no face is detected, use the multi selector to position the focus point over the main subject.
5 Press the shutter-release button halfway. Viewfinder photography: Press the Focus point shutter-release button halfway to focus (the AF-assist illuminator may light if the subject is poorly lit). When the focus operation is complete, the active focus point and in-focus indicator (I) will appear in the viewfinder. Focus indicator In-focus indicator I F H F H (flashes) Description Subject in focus. Focus point is between camera and subject. Focus point is behind subject.
6 Shoot. Smoothly press the shutter-release button the rest of the way down to take the photograph. The memory card access lamp will light and the Memory card access photograph will be lamp displayed in the monitor for a few seconds. Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete. To end live view, press the a button.
A The Standby Timer (Viewfinder Photography) The viewfinder and some control panel displays will turn off if no operations are performed for about six seconds, reducing the drain on the battery. Press the shutter-release button halfway to reactivate the display. The length of time before the standby timer expires automatically can be selected using Custom Setting c2 (Standby timer, 0 263).
A The Built-in Flash If additional lighting is required for correct exposure in i mode, the built-in flash will pop up automatically when the shutterrelease button is pressed halfway. If the flash is raised, photographs can only be taken when the flash-ready indicator (M) is displayed. If the flash-ready indicator is not displayed, the flash is charging; remove your finger briefly from the shutter-release button and try again.
Tips for Live View ❚❚ Viewing and Hiding Indicators Pressing the R button cycles through the following displays.
❚❚ Live View Zoom Preview Press the X (T) button to magnify the view in the monitor up to a maximum of about 17 ×. A navigation window will appear in a gray frame at the bottom right corner of the display. Use the multi selector to scroll to areas of the frame not visible in the monitor, or press W (Z) to zoom out.
D Shooting in Live View To prevent light entering via the viewfinder from interfering with photographs and exposure, the rubber eyecup can be removed and the viewfinder covered with the supplied eyepiece cap before shooting (0 90).
Basic Playback 1 Press the K button. A photograph will be displayed in the monitor. K button 2 View additional pictures. Additional pictures can be displayed by pressing 4 or 2 or flicking a finger left or right over the display. To view additional information on the current photograph, press 1 and 3 (0 231). To end playback and return to shooting mode, press the shutter-release button halfway.
Deleting Unwanted Photographs To delete the photograph currently displayed in the monitor, press the O (Q) button. Note that photographs can not be recovered once deleted. 1 Display the photograph. Display the photograph you wish to delete as described in “Basic Playback” (0 59). K button 2 Delete the photograph. Press the O (Q) button. A confirmation dialog will be displayed; press the O (Q) button again to delete the image and return to playback. To exit without deleting the picture, press K.
Matching Settings to the Subject or Situation (Scene Mode) The camera offers a choice of “scene” modes. Choosing a scene mode automatically optimizes settings to suit the selected scene, making creative photography as simple as selecting a mode, framing a picture, and shooting as described in “‘Pointand-Shoot’ Photography (i and j Modes)” (0 48).
❚❚ Scenes Option k l p m n o r s t 62 Description Use for portraits with soft, natural-looking skin tones. If the subject is far from the background or a Portrait telephoto lens is used, background details will be softened to lend the composition a sense of depth. Landscape Use for vivid landscape shots in daylight. 1, 2 Use for snapshots of children. Clothing and Child background details are vividly rendered, while skin tones remain soft and natural.
Option u Sunset v Dusk/Dawn w Pet Portrait x Candlelight Description Preserves the deep hues seen in sunsets and sunrises. 1, 2 Preserves the colors seen in the weak natural light before dawn or after sunset. 1, 2 Use for portraits of active pets. 2 For photographs taken by candlelight. 1 Use for fields of flowers, orchards in bloom, and y Blossom other landscapes featuring expanses of blossoms. 1 Captures the brilliant reds and yellows in autumn z Autumn Colors leaves.
Special Effects Special effects can be used when taking photographs and shooting movies. Choosing Special Effects The following effects can be selected by rotating the mode dial to EFFECTS and rotating the main command dial until the desired option appears in the monitor. Mode dial Main command dial Monitor Note that the effect can not be changed during movie recording.
Option Description Create photos that appear to be pictures of dioramas. Works best when shooting from a high vantage point. Miniature effect movies play back at high speed, Miniature compressing about 45 minutes of footage shot at 1920 i Effect × 1080/30p into a silent movie that plays back in about three minutes. The effect can be adjusted in live view (0 68). 1, 2 All colors other than the selected colors are recorded in Selective black and white. The effect can be adjusted in live view u Color (0 70).
Options Available in Live View Settings for the selected effect are adjusted in the live view display. ❚❚ e Photo Illustration 1 Select live view. Press the a button. The view through the lens will be displayed in the monitor. a button 2 Adjust outline thickness. Press J to display options. Press 4 or 2 to make outlines thicker or thinner. 3 Press J. Press J to exit when settings are complete.
❚❚ ' Toy Camera Effect 1 Select live view. Press the a button. The view through the lens will be displayed in the monitor. a button 2 Adjust options. Press J to display options. Press 1 or 3 to highlight Vividness or Vignetting and press 4 or 2 to change. Adjust vividness to make colors more or less saturated, vignetting to control the amount of vignetting. 3 Press J. Press J to exit when settings are complete.
❚❚ i Miniature Effect 1 Select live view. Press the a button. The view through the lens will be displayed in the monitor. a button 2 Position the focus point. Use the multi selector to position the focus point in the area that will be in focus and then press the shutterrelease button halfway to check focus. To temporarily clear miniature effect options from the display and enlarge the view in the monitor for precise focus, press X (T). Press W (Z) to restore the miniature effect display.
4 Adjust options. Press 4 or 2 to choose the orientation of the area that will be in focus and press 1 or 3 to adjust its width. 5 Press J. Press J to exit when settings are complete.
❚❚ u Selective Color 1 Select live view. Press the a button. The view through the lens will be displayed in the monitor. a button 2 Display options. Press J to display selective color options. 3 Select a color. Selected color Frame an object in the white square in the center of the display and press 1 to choose the color of the object as one that will remain in the final image (the camera may have difficulty detecting unsaturated colors; choose a saturated color).
4 Choose the color range. Color range Press 1 or 3 to increase or decrease the range of similar hues that will be included in the final image. Choose from values between 1 and 7; note that higher values may include hues from other colors. 5 Select additional colors. To select additional colors, rotate the main command dial to highlight another of the three color boxes at the top of the display and repeat Steps 3 and 4 to select another color. Repeat for a third color if desired.
P, S, A, and M Modes P, S, A, and M modes offer different degrees of control over shutter speed and aperture. Choosing a Mode Mode P S A M Description Programmed auto (0 73): Camera sets shutter speed and aperture for optimal exposure. Recommended for snapshots and in other situations in which there is little time to adjust camera settings. Shutter-priority auto (0 74): User chooses shutter speed; camera selects aperture for best results. Use to freeze or blur motion.
P: Programmed Auto In this mode, the camera automatically adjusts shutter speed and aperture according to a built-in program to ensure optimal exposure in most situations. A Flexible Program In mode P, different combinations of shutter speed and aperture can be selected by rotating the main command dial while the exposure meters are on (“flexible program”). Rotate the dial to the right for large apertures (low f-numbers) that blur background details or fast shutter speeds that “freeze” motion.
S: Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. To choose a shutter speed, rotate the main command dial while the exposure meters are on. Shutter speed can be set to “v” or to values between 30 s and 1 /8000 s.
A: Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. To choose an aperture between the minimum and maximum values for the lens, rotate the sub-command dial while the exposure meters are on. Sub-command dial Control panel Monitor A Beeps During Live View A beep may sound if you adjust aperture, use the live view selector, or rotate the mode dial during live view.
M: Manual In manual exposure mode, you control both shutter speed and aperture. While the exposure meters are on, rotate the main command dial to choose a shutter speed, and the sub-command dial to set aperture. Shutter speed can be set to “v” or to values between 30 s and 1/8000 s, or the shutter can be held open indefinitely for a long time-exposure (A or %, 0 79). Aperture can be set to values between the minimum and maximum values for the lens. Use the exposure indicators to check exposure.
A AF Micro NIKKOR Lenses Provided that an external exposure meter is used, the exposure ratio need only be taken into account when the lens aperture ring is used to set aperture. A The Exposure Indicators If a shutter speed other than “bulb” or “time” is selected, the exposure indicators show whether the photograph would be under- or overexposed at current settings.
A Beeps During Live View A beep may sound if you adjust aperture, use the live view selector, or rotate the mode dial during live view. This does not indicate an error or malfunction.
Long Time-Exposures (M Mode Only) Select the following shutter speeds for long time-exposures of moving lights, the stars, night scenery, or fireworks. • Bulb (A): The shutter remains open while the shutter-release button is held down. To prevent blur, use a tripod or Shutter speed: A (35-second exposure) an optional wireless remote controller Aperture: f/25 (0 287) or remote cord (0 287).
❚❚ Bulb 1 Rotate the mode dial to M. Mode dial 2 Choose the shutter speed. While the exposure meters are on, rotate the main command dial to choose a shutter speed of “Bulb” (A). Main command dial Control panel Monitor 3 Take the photograph. After focusing, press the shutter-release button on the camera or on the optional wireless remote controller or remote cord all the way down. Remove your finger from the shutter-release button when the exposure is complete.
❚❚ Time 1 Rotate the mode dial to M. Mode dial 2 Choose the shutter speed. While the exposure meters are on, rotate the main command dial left to choose a shutter speed of “Time” (%). Main command dial Control panel Monitor 3 Open the shutter. After focusing, press the shutter-release button on the camera or optional remote control, remote cord, or wireless remote controller all the way down. 4 Close the shutter. Repeat the operation performed in Step 3.
A ML-L3 Remote Controls If you will be using an ML-L3 remote control, select a remote control mode (Delayed remote, Quick-response remote, or Remote mirrorup) using the Remote control mode (ML-L3) option in the photo shooting menu (0 175). Note that if you are using an ML-L3 remote control, pictures will be taken in “Time” mode even when “Bulb”/A is selected for shutter speed.
User Settings: U1 and U2 Modes Assign frequently-used settings to the U1 and U2 positions on the mode dial. Saving User Settings 1 Select a mode. Mode dial Rotate the mode dial to the desired mode. 2 Adjust settings.
3 Select Save user settings. Press the G button to display the menus. Highlight Save user settings in the setup menu and press 2. G button 4 Select Save to U1 or Save to U2. Highlight Save to U1 or Save to U2 and press 2. 5 Save user settings. Highlight Save settings and press J to assign the settings selected in Steps 1 and 2 to the mode dial position selected in Step 4.
Resetting User Settings To reset settings for U1 or U2 to default values: 1 Select Reset user settings. Press the G button to display the menus. Highlight Reset user settings in the setup menu and press 2. G button 2 Select Reset U1 or Reset U2. Highlight Reset U1 or Reset U2 and press 2. 3 Reset user settings. Highlight Reset and press J.
Release Mode Choosing a Release Mode To choose a release mode, press the release mode dial lock release and turn the release mode dial so that the pointer aligns with the desired setting. Pointer Mode S CL CH Q QC E MUP 86 Description Single frame: Camera takes one photograph each time shutterrelease button is pressed. Continuous low speed: While shutter-release button is held down, camera records 1–7 frames per second.
* Average frame rate with an EN-EL15a battery, continuous-servo AF, manual or shutter-priority auto exposure, a shutter speed of 1/250 s or faster, remaining settings (or in the case of CL, remaining settings other than Custom Setting d1) at default values, and memory remaining in memory buffer. The stated rates may not be available under some conditions. Frame rates may drop at high ISO sensitivities (Hi 0.
A Live View If a continuous release mode is used during live view, photographs will be displayed in place of the view through the lens while the shutterrelease button is pressed. A See Also For information on: • Choosing the maximum number of photographs that can be taken in a single burst, see A > Custom Setting d2 (Max. continuous release, 0 263). • The number of pictures that can be taken in a single burst, see “Memory Card Capacity” (0 347).
Self-Timer Mode (E) The self-timer can be used to reduce camera shake or for selfportraits. 1 Select self-timer mode. Press the release mode dial lock release and turn the release mode dial to E. Release mode dial 2 Frame the photograph and focus. The self-timer can not be used if the camera is unable to focus using single-servo AF or in other situations in which the shutter can not be released. 3 Start the timer. Press the shutter-release button all the way down to start the timer.
A Cover the Viewfinder When taking photos without your eye to the viewfinder, remove the rubber eyecup (q) and insert the supplied eyepiece cap as shown (w). This prevents light entering via the viewfinder from appearing in photographs or interfering with exposure. Hold the camera firmly when removing the rubber eyecup.
Mirror up Mode (MUP) Choose this mode to minimize blurring caused by camera movement when the mirror is raised. To use mirror-up mode, press the release mode dial lock release and rotate the release mode dial to MUP (mirror up). Release mode dial lock release Release mode dial After pressing the shutter-release button halfway to set focus and exposure, press the shutter-release button the rest of the way down to raise the mirror.
A Mirror up Mode A picture will be taken automatically if no operations are performed for about 30 s with the mirror raised. A Preventing Blur To prevent blurring caused by camera movement, press the shutterrelease button smoothly, or use an optional remote control, wireless remote controller, or remote cord (0 287). For information on using the optional ML-L3 remote control for mirror-up photography, see “Remote Control Photography” (0 175). Use of a tripod is recommended.
Image Recording Options Image Area Choose an image area from DX (24×16) and 1.3× (18×12). Option a DX (24×16) Z 1.3× (18×12) Description Pictures are recorded using a 23.5 × 15.7 mm image area (DX format). Pictures are recorded using a 18.0 × 12.0 mm image area, producing a telephoto effect without the need to change lenses. Viewfinder display Photo with DX image area (24×16) Photo with image area of 1.
A Image Area The selected option is shown in the display. Information display Shooting display A The Viewfinder Display A s icon is displayed in the viewfinder when the 1.3× DX crop is selected. 1.3× DX crop A See Also For information on: • The crops available for movie recording, see “The Movie Crop” (0 190). • The number of pictures that can be stored at different image area settings, see “Memory Card Capacity” (0 347).
The image area can be selected using the Choose image area option in the photo shooting menu or by pressing a control and rotating a command dial. ❚❚ The Choose Image Area Menu 1 Select Choose image area. Highlight Choose image area in the photo shooting menu and press 2. 2 Adjust settings. Choose an option and press J. The selected crop is displayed in the viewfinder (0 94). A Image Size Image size varies with the option selected for image area (0 99).
❚❚ Camera Controls 1 Assign image area selection to a camera control. Use Custom Setting f1 (Custom control assignment, 0 266) to assign Choose image area to a control. 2 Use the selected control to choose an image area. The image area can be selected by pressing the selected control and rotating the main or sub-command dial until the desired crop is displayed in the viewfinder (0 94).
Image Quality The D7500 supports the following image quality options: Option File type NEF (RAW) NEF NEF (RAW)+ JPEG fine★/ NEF (RAW)+ JPEG fine NEF (RAW)+ JPEG normal★/ NEF (RAW)+ JPEG normal NEF (RAW)+ JPEG basic★/ NEF (RAW)+ JPEG basic JPEG fine★/ JPEG fine JPEG normal★/ JPEG normal JPEG basic★/ JPEG basic Description RAW data from the image sensor are saved without additional processing. Settings such as white balance and contrast can be adjusted after shooting.
Image quality can be set by pressing the X (T) button and rotating the main command dial until the desired setting is displayed in the information display. X (T) button Main command dial A JPEG Compression Image quality options with a star (“★”) use compression intended to ensure maximum quality; the size of the files varies with the scene. Options without a star use a type of compression designed to produce smaller files; files tend to be roughly the same size regardless of the scene recorded.
Image Size Image size is measured in pixels. Choose from # Large, $ Medium, or % Small (note that image size varies depending on the option selected for Choose image area, 0 93): Image area Option Large Medium Small Large Medium Small DX (24×16) 1.3× (18×12) Size (pixels) 5568 × 3712 4176 × 2784 2784 × 1856 4272 × 2848 3200 × 2136 2128 × 1424 Image size can be set by pressing the X (T) button and rotating the sub-command dial until the desired setting is displayed in the information display.
Focus Focus can be adjusted automatically (0 100) or manually (0 115). The user can also select the focus point for automatic or manual focus (0 107) or use focus lock to focus and recompose photographs after focusing (0 111). Autofocus To use autofocus, rotate the focus-mode selector to AF.
The following autofocus modes can be selected during live view: Mode Description Single-servo AF: For stationary subjects. Focus locks when shutterrelease button is pressed halfway. You can also focus by AF-S touching your subject in the monitor, in which case focus locks until you lift your finger from the display to take the photograph. Full-time servo AF: For moving subjects. Camera focuses continuously until shutter-release button is pressed. Focus locks when shutter-release button is pressed halfway.
A Predictive Focus Tracking (Viewfinder Photography) In AF-C mode or when continuous-servo autofocus is selected in AF-A mode, the camera will initiate predictive focus tracking if the subject moves toward or away from the camera while the shutter-release button is pressed halfway. This allows the camera to track focus while attempting to predict where the subject will be when the shutter is released.
AF-Area Mode AF-area mode controls how the camera selects the focus-point for autofocus. The following options are available during viewfinder photography: • Single-point AF: Select the focus point; the camera will focus on the subject in the selected focus point only. Use with stationary subjects. • Dynamic-area AF: Select the focus point. In AF-A and AF-C focus modes, the camera will focus based on information from surrounding focus points if the subject briefly leaves the selected point.
• 3D-tracking: Select the focus point. In AF-A and AF-C focus modes, the camera will track subjects that leave the selected focus point and select new focus points as required. Use to quickly compose pictures with subjects that are moving erratically from side to side (e.g., tennis players). If the subject leaves viewfinder, remove your finger from the shutter-release button and recompose the photograph with the subject in the selected focus point.
A 3D-tracking When the shutter-release button is pressed halfway, the colors in the area surrounding the focus point are stored in the camera. Consequently 3D-tracking may not produce the desired results with subjects that are similar in color to the background or that occupy a very small area of the frame.
The following AF-area modes can be selected during live view: • ! Face-priority AF: Use for portraits. The camera automatically detects and focuses on portrait subjects; the selected subject is indicated by a double yellow border (if multiple faces are detected, the camera will focus on the closest subject; to choose a different subject, use the multi selector).
• & Subject-tracking AF: Use the multi selector to position the focus point over your subject and press J to start tracking. The focus point will track the selected subject as it moves through the frame. To end tracking, press J again. Alternatively, you can start tracking by touching your subject in the monitor; to end tracking and take a photograph, lift your finger from the screen.
AF-area mode can be selected by pressing the AF-mode button and rotating the subcommand dial until the desired setting is displayed.
A AF-Area Mode (Viewfinder Photography) AF-area mode is shown in the control panel and viewfinder. AF-area mode Control panel Viewfinder Viewfinder focus-point display Single-point AF 9-point dynamicarea AF * 21-point dynamicarea AF * 51-point dynamicarea AF * 3D-tracking Group-area AF Auto-area AF * Only active focus point is displayed in the viewfinder. Remaining focus points provide information to assist focus operation.
D Using Autofocus in Live View Use an AF-S or AF-P lens. The desired results may not be achieved with other lenses or teleconverters. Note that in live view, autofocus is slower and the monitor may brighten or darken while the camera focuses. The focus point may sometimes be displayed in green when the camera is unable to focus.
Focus Lock Focus lock can be used to change the composition after focusing, making it possible to focus on a subject that will not be in a focus point in the final composition. If the camera is unable to focus using autofocus (0 114), focus lock can also be used to recompose the photograph after focusing on another object at the same distance as your original subject. Focus lock is most effective when an option other than auto-area AF is selected for AF-area mode (0 103). 1 Focus.
2 Lock focus. AF-A and AF-C focus modes (viewfinder photography): With the shutter-release button pressed halfway (q), press the A AE-L/AF-L button (w) to lock both focus and exposure (an AE-L icon will be displayed in the viewfinder). Focus will remain locked while the A AE-L/ AF-L button is pressed, even if you later remove your finger from the shutterrelease button.
3 Recompose the photograph and shoot. Focus will remain locked between shots if you keep the shutter-release button pressed halfway (AF-S and live view) or keep the A AE-L/AF-L button pressed, allowing several photographs in succession to be taken at the same focus setting. Viewfinder photography Live view Do not change the distance between the camera and the subject while focus lock is in effect. If the subject moves, focus again at the new distance.
A Getting Good Results with Autofocus Autofocus does not perform well under the conditions listed below. The shutter release may be disabled if the camera is unable to focus under these conditions, or the in-focus indicator (I) may be displayed and the camera may sound a beep, allowing the shutter to be released even when the subject is not in focus. In these cases, focus manually (0 115) or use focus lock (0 111) to focus on another subject at the same distance and then recompose the photograph.
Manual Focus Manual focus is available for lenses that do not support autofocus (non-AF NIKKOR lenses) or when the autofocus does not produce the desired results (0 114). • AF lenses: Set the lens focus Focus-mode selector mode switch (if present) and camera focus-mode selector to M. D AF Lenses Do not use AF lenses with the lens focus mode switch set to M and the camera focus-mode selector set to AF. Failure to observe this precaution could damage the camera or lens.
❚❚ The Electronic Rangefinder (Viewfinder Photography) The viewfinder focus indicator can be used to confirm whether the subject in the selected focus point is in focus (the focus point can be selected from any of the 51 focus points). After positioning the subject in the selected focus point, press the shutter-release button halfway and rotate the lens focus ring until the in-focus indicator (I) is displayed.
A Live View Press the X (T) button to zoom in for precise focus in live view (0 57).
ISO Sensitivity The camera’s sensitivity to light can be adjusted according to the amount of light available. ISO Sensitivity Settings Choose from settings that range from ISO 100 and ISO 51200 in steps equivalent to 1/3 EV. Settings of from about 0.3 to 1 EV below ISO 100 and 0.3 to 5 EV above ISO 51200 are also available for special situations. Auto, scene, and special effect modes also offer an AUTO option, which allows the camera to set ISO sensitivity automatically in response to lighting conditions.
A The Photo Shooting Menu ISO sensitivity can also be adjusted from the photo shooting menu. Choose ISO sensitivity settings in photo shooting menu to adjust settings for photographs (0 253). A Live View In live view, the selected value is displayed in the monitor.
Auto ISO Sensitivity Control (P, S, A, and M Modes Only) If On is selected for ISO sensitivity settings > Auto ISO sensitivity control in the photo shooting menu, ISO sensitivity will automatically be adjusted if optimal exposure can not be achieved at the value selected by the user (ISO sensitivity is adjusted appropriately when the flash is used). 1 Select Auto ISO sensitivity control. Select ISO sensitivity settings in the photo shooting menu, highlight Auto ISO sensitivity control and press 2.
3 Adjust settings. The maximum value for auto ISO sensitivity can be selected using Maximum sensitivity (the minimum value for auto ISO sensitivity is automatically set to ISO 100; note that if the ISO sensitivity selected by the user is higher than that chosen for Maximum sensitivity, the value selected by the user will be used instead).
A Live View In live view, the auto ISO sensitivity control indicator is displayed in the monitor. A Minimum Shutter Speed Auto shutter-speed selection can be fine-tuned by highlighting Auto and pressing 2: for example, values faster than those usually selected automatically can be used with telephoto lenses to reduce blur. Note, however, that Auto functions only with CPU lenses.
Exposure Metering (P, S, A, and M Modes Only) Choose how the camera sets exposure in P, S, A, and M modes (in other modes, the camera selects the metering method automatically). Option a Z b 4 Description Matrix: Produces natural results in most situations.
To choose a metering option, press the W (Z) button and rotate the main command dial until the desired setting is displayed. W (Z) button Main command dial Control panel A Live View In live view, the selected option is displayed in the monitor. A Highlight-Weighted Metering Center-weighted metering may be used if highlight-weighted metering is selected with certain CPU lenses (AI-P NIKKOR lenses and AF lenses that are not of type G, E, or D; 0 280).
Autoexposure Lock Use autoexposure lock to recompose photographs after using center-weighted metering and spot metering (0 123) to meter exposure. 1 Lock exposure. Position the subject in the selected focus point and press the shutterrelease button halfway. With the shutter-release button pressed halfway and the subject positioned in the focus point, press the A AE-L/ AF-L button to lock exposure (if you are using autofocus, confirm that the I in-focus indicator appears in the viewfinder).
2 Recompose the photograph. Keeping the A AE-L/AF-L button pressed, recompose the photograph and shoot. A Spot Metering In spot metering, exposure will be locked at the value metered at the selected focus point.
Exposure Compensation (P, S, A, M, SCENE, and EFFECTS Modes Only) Exposure compensation is used to alter exposure from the value suggested by the camera, making pictures brighter or darker. It is most effective when used with center-weighted or spot metering (0 123). Choose from values between –5 EV (underexposure) and +5 EV (overexposure) in increments of 1/3 EV. In general, positive values make the subject brighter while negative values make it darker.
At values other than ±0.0, the 0 at the center of the exposure indicators will flash (except in mode M) and a E icon will be displayed in the control panel and viewfinder after you release the E button. The current value for exposure compensation can be confirmed in the exposure indicator by pressing the E button. Normal exposure can be restored by setting exposure compensation to ±0.
A See Also For information on: • Choosing the size of the increments available for exposure compensation, see A > Custom Setting b2 (EV steps for exposure cntrl, 0 262). • Making adjustments to exposure compensation without pressing the E button, see A > Custom Setting b3 (Easy exposure compensation, 0 262). • Automatically varying exposure, flash level, white balance, or Active D-Lighting, see “Bracketing” (0 209).
White Balance (P, S, A, and M Modes Only) White balance ensures that colors are unaffected by the color of the light source. White Balance Options In modes other than P, S, A, and M, white balance is set automatically by the camera. Auto white balance is recommended for most light sources in P, S, A, and M modes, but other values can be selected if necessary according to the type of source: Option (Color temp.
Option (Color temp. *) H Direct sunlight (5200 K) N Flash (5400 K) G Cloudy (6000 K) Description Use with subjects lit by direct sunlight. For flash photography. Use in daylight under overcast skies. Use in daylight with subjects in the M Shade (8000 K) shade. Choose color temp. Choose color temperature from list K (2500–10,000 K) of values (0 137). Use subject, light source, or existing photograph as reference for white L Preset manual balance (0 139).
A The Shooting Menus White balance can also be adjusted using the White balance option in the photo or movie shooting menu (0 254, 258), which also can be used to fine-tune white balance (0 134) or manage white-balance presets (0 139). The Auto option in the White balance menu offers a choice of Normal and Keep warm lighting colors, which preserves the warm colors produced by incandescent lighting, while the I Fluorescent option can be used to select the light source from the bulb types.
A Color Temperature The perceived color of a light source varies with the viewer and other conditions. Color temperature is an objective measure of the color of a light source, defined with reference to the temperature to which an object would have to be heated to radiate light in the same wavelengths. While light sources with a color temperature in the neighborhood of 5000–5500 K appear white, light sources with a lower color temperature, such as incandescent light bulbs, appear slightly yellow or red.
Fine-Tuning White Balance At settings other than K (Choose color temp.), white balance can be “fine-tuned” to compensate for variations in the color of the light source or to introduce a deliberate color cast into an image. ❚❚ The White Balance Menu To fine-tune white balance from the photo shooting menu, select White balance and follow the steps below. 1 Display fine-tuning options.
3 Press J. Press J to save settings and return to the photo shooting menu. ❚❚ The L (U) Button At settings other than K (Choose color temp.) and L (Preset manual), the L (U) button can be used to fine-tune white balance on the amber (A)–blue (B) axis (0 134; to finetune white balance when L is L (U) button Sub-command dial selected, use the shooting menus as described in “FineTuning Preset Manual White Balance”, 0 147).
A White Balance Fine-Tuning If white balance has been fine-tuned, an asterisk (“E”) will be displayed next to the white balance setting. Note that the colors on the finetuning axes are relative, not absolute. For example, moving the cursor to B (blue) when a “warm” setting such as J (Incandescent) is selected for white balance will make photographs slightly “colder” but will not actually make them blue.
Choosing a Color Temperature Follow the steps below to choose a color temperature when K (Choose color temp.) is selected for white balance. D Choose Color Temperature Note that the desired results will not be obtained with flash or fluorescent lighting. Choose N (Flash) or I (Fluorescent) for these sources. With other light sources, take a test shot to determine if the selected value is appropriate.
3 Press J. Press J to save changes and return to the shooting menus. If a value other than 0 is selected for the green (G)–magenta (M) axis, an asterisk (“E”) will be displayed next to the K icon. ❚❚ The L (U) Button When K (Choose color temp.) is selected, the L (U) button can be used to select the color temperature, although only for the amber (A)–blue (B) axis.
Preset Manual Preset manual is used to record and recall custom white balance settings for shooting under mixed lighting or to compensate for light sources with a strong color cast. The camera can store up to six values for preset manual white balance in presets d-1 through d-6.
2 Set white balance to L (Preset manual). Press the L (U) button and rotate the main command dial until L is displayed in the information display. L (U) button Main command dial 3 Select a preset. Press the L (U) button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed in the information display.
4 Select direct measurement mode. Release the L (U) button briefly and then press the button until D starts to flash in the control panel and viewfinder. 5 Measure white balance. In the few seconds before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down. The camera will measure a value for white balance and store it in the preset selected in Step 3.
6 Check the results. If the camera was able to measure a value for white balance, C will flash in the control panel, while the viewfinder will show a flashing a. Press the shutter-release button halfway to exit to shooting mode. If lighting is too dark or too bright, the camera may be unable to measure white balance. A flashing b a will appear in the control panel and viewfinder. Press the shutter-release button halfway to return to Step 5 and measure white balance again.
Live View (Spot White Balance) During live view, white balance can be measured in a selected area of the frame, eliminating the need to prepare a reference object or change lenses during telephoto photography. 1 Press the a button. The mirror will be raised and the view through the lens will be displayed in the camera monitor. 2 Set white balance to L (Preset manual). Press the L (U) button and rotate the main command dial until L is displayed in the monitor.
3 Select a preset. Press the L (U) button and rotate the sub-command dial until the desired white balance preset (d-1 to d-6) is displayed in the monitor. L (U) button Sub-command dial 4 Select direct measurement mode. Release the L (U) button briefly and then press the button until the L icon in the monitor starts to flash. A spot white balance target (r) will be displayed at the selected focus point. 5 Position the target over a white or grey area.
6 Measure white balance. Press J or press the shutter-release button all the way down to measure white balance. The time available to measure white balance is that selected for Custom Setting c4 (Monitor off delay) > Live view (0 263). If the camera is unable to measure white balance, a message will be displayed. Choose a new white balance target and repeat the process from Step 5. 7 Exit direct measurement mode. Press the L (U) button to exit direct measurement mode.
Managing Presets ❚❚ Copying White Balance from a Photograph Follow the steps below to copy a value for white balance from an existing photograph to a selected preset. 1 Select Preset manual. Select White balance in the photo shooting menu, then highlight Preset manual and press 2. 2 Select a destination. Highlight the destination preset (d-1 to d-6) and press W (Z). 3 Choose Select image. Highlight Select image and press 2. 4 Highlight a source image. Highlight the source image.
5 Copy white balance. Press J to copy the white balance value for the highlighted photograph to the selected preset. If the highlighted photograph has a comment (0 270), the comment will be copied to the comment for the selected preset. A Fine-Tuning Preset Manual White Balance The selected preset can be fine-tuned by selecting Fine-tune and adjusting white balance as described in “Fine-Tuning White Balance” (0 134).
Image Enhancement Picture Controls (P, S, A, and M Modes Only) In P, S, A, and M modes, your choice of Picture Control determines how pictures are processed (in other modes, the camera selects a Picture Control automatically). Selecting a Picture Control Choose a Picture Control according to the subject or type of scene. Option n Q R S T e f q 148 Description The camera automatically adjusts hues and tones based on the Standard Picture Control.
1 Select Set Picture Control. Highlight Set Picture Control in the photo shooting menu and press 2. 2 Select a Picture Control. Highlight a Picture Control and press J. A Custom Picture Controls Custom Picture Controls are created through modifications to existing Picture Controls using the Manage Picture Control option in the photo or movie shooting menu (0 254, 258). Custom Picture Controls can be saved to a memory card for sharing among other cameras of the same model and compatible software.
Modifying Picture Controls Existing preset or custom Picture Controls (0 149) can be modified to suit the scene or the user’s creative intent. Choose a balanced combination of settings using Quick adjust, or make manual adjustments to individual settings. 1 Select a Picture Control. Highlight the desired Picture Control in the Picture Control list (0 148) and press 2. 2 Adjust settings.
❚❚ Picture Control Settings Option Manual adjustments Description Mute or heighten the effect of the selected Picture Quick adjust Control (note that this resets all manual adjustments). Not available with custom Picture Controls (0 149). Control the sharpness of outlines. Select A to adjust Sharpening sharpening automatically according to the type of scene. Adjust clarity manually or select A to let the camera adjust clarity automatically.
A Switching Between Manual and Auto Press the X (T) button to switch back and forth between manual and auto (A) settings for sharpening, clarity, contrast, and saturation. A Previous Settings The j indicator under the value display in the Picture Control setting menu indicates the previous value for the setting. Use this as a reference when adjusting settings. A Filter Effects (Monochrome Only) The options in this menu simulate the effect of color filters on monochrome photographs.
Preserving Detail in Highlights and Shadows (P, S, A, and M Modes Only) Active D-Lighting Active D-Lighting preserves details in highlights and shadows, creating photographs with natural contrast. Use for high contrast scenes, for example when photographing brightly lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny day. It is most effective when used with matrix metering (0 123).
To use Active D-Lighting: 1 Select Active D-Lighting. Highlight Active D-Lighting in the photo shooting menu and press 2. 2 Choose an option. Highlight the desired option and press J. If Y Auto is selected, the camera will automatically adjust Active D-Lighting according to shooting conditions (in mode M, however, Y Auto is equivalent to Q Normal). D Active D-Lighting Noise (randomly-spaced bright pixels, fog, or lines) may appear in photographs taken with Active D-Lighting.
High Dynamic Range (HDR) Used with high-contrast subjects, High Dynamic Range (HDR) preserves details in highlights and shadows by combining two shots taken at different exposures. HDR is most effective when used with matrix metering (0 123; with spot or center-weighted metering and a non-CPU lens, a strength of Auto is equivalent to Normal). It can not be used to record NEF (RAW) images.
2 Select a mode. Highlight HDR mode and press 2. Highlight one of the following and press J. • To take a series of HDR photographs, select 6 On (series). HDR shooting will continue until you select Off for HDR mode. • To take one HDR photograph, select On (single photo). Normal shooting will resume automatically after you have created a single HDR photograph. • To exit without creating additional HDR photographs, select Off.
4 Frame a photograph, focus, and shoot. The camera takes two exposures when the shutter-release button is pressed all the way down. l j will flash in the control panel and l l in the viewfinder while the images are combined; no photographs can be taken until recording is complete. Regardless of the option currently selected for release mode, only one photograph will be taken each time the shutter-release button is pressed.
A The BKT Button If HDR (high dynamic range) is selected for Custom Setting f1 (Custom control assignment) > BKT button + y (0 266), you can select the HDR mode by pressing the BKT button and rotating the main command dial and the strength by pressing the BKT button and rotating the sub-command dial.
Flash Photography Using the Built-in Flash The built-in flash can be used not only when natural lighting is inadequate but to fill in shadows and backlit subjects or to add a catch light to the subject’s eyes. Auto Pop-up Modes In i, k, p, n, o, s, w, f, d, e, and ' modes, the built-in flash automatically pops up and fires as required. 1 Choose a flash mode. Keeping the M (Y) button pressed, rotate the main command dial until the desired flash mode is displayed.
2 Take pictures. The flash will pop up as required when the shutterrelease button is pressed halfway and fire when a photograph is taken. If the flash does not pop up automatically, DO NOT attempt to raise it by hand. Failure to observe this precaution could damage the flash. ❚❚ Flash Modes The following flash modes are available: Auto flash: When lighting is poor or the subject is backlit, the flash pops up automatically when the shutter-release button is pressed halfway and fires as required.
Manual Pop-up Modes In P, S, A, M, and 0 modes, the flash must be raised manually. The flash will not fire if it is not raised. 1 Raise the flash. Press the M (Y) button to raise the flash. Note that if the flash is off or an optional external flash unit is attached, the built-in flash will not pop up; proceed to Step 2. M (Y) button 2 Choose a flash mode (P, S, A, and M modes only). Keeping the M (Y) button pressed, rotate the main command dial until the desired flash mode is displayed.
❚❚ Flash Modes The following flash modes are available: Fill flash: The flash fires with every shot. Red-eye reduction: Use for portraits. The flash fires with every shot, but before it fires, the red-eye reduction lamp lights to help reduce “red-eye.” Not available in 0 mode. Red-eye reduction with slow sync: As for “red-eye reduction”, above, except that shutter speed slows automatically to capture background lighting at night or under low light.
A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. D The Built-in Flash Remove lens hoods to prevent shadows. The flash has a minimum range of approximately 0.6 m (2 ft) and can not be used in the macro range of zoom lenses with a macro function. Use lenses with focal lengths of 16 mm to 300 mm; peripheral illumination may drop if the flash is used with lenses with focal lengths under 16 mm.
Flash Control Mode In P, S, A, and M modes, the flash control mode for the built-in flash can be selected using the Flash control > Flash control mode (built-in) option in the photo shooting menu. The options available vary with the item selected. Option TTL Manual Repeating flash Description Flash level is adjusted automatically in response to shooting conditions. Flash level is selected using Manual output amount.
A Flash Control for Optional Flash Units When an optional flash unit is connected, the Flash control > Flash control mode (built-in) option in the photo shooting menu changes to Flash control mode (external). A Flash Control Mode In i-TTL flash control, the camera sets the flash level based on light reflected from a series of nearly invisible preflashes (monitor preflashes) emitted immediately before the main flash fires.
A Aperture, Sensitivity, and Flash Range Flash range varies with sensitivity (ISO equivalency) and aperture. 100 1.4 2 2.8 4 5.6 8 11 16 200 2 2.8 4 5.6 8 11 16 22 Aperture at ISO equivalent of Approximate range 400 800 1600 3200 6400 12800 m ft 2.8 4 5.6 8 11 16 0.7–8.5 2ft 4in.–27ft 10in. 4 5.6 8 11 16 22 0.6–6.0 2ft–19ft 8in. 5.6 8 11 16 22 32 0.6–4.2 2ft–13ft 9in. 8 11 16 22 32 — 0.6–3.0 2ft–9ft 10in. 11 16 22 32 — — 0.6–2.1 2ft–6ft 10in. 16 22 32 — — — 0.6–1.5 2ft–4ft 11in. 22 32 — — — — 0.6–1.
Flash Compensation (P, S, A, M, and SCENE Modes Only) Flash compensation is used to alter flash output by from –3EV to +1EV in increments of 1/3 EV, changing the brightness of the main subject relative to the background. Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. Press the M (Y) button and rotate the sub-command dial until the desired value is displayed.
At values other than ±0.0, a Y icon will be displayed after you release the M (Y) button. The current value for flash compensation can be confirmed by pressing the M (Y) button. Normal flash output can be restored by setting flash compensation to ±0.0. Except in SCENE mode, flash compensation is not reset when the camera is turned off (in SCENE mode, flash compensation will be reset when another mode is selected or the camera is turned off ).
FV Lock This feature is used to lock flash output, allowing photographs to be recomposed without changing the flash level and ensuring that flash output is appropriate to the subject even when the subject is not positioned in the center of the frame. Flash output is adjusted automatically for any changes in ISO sensitivity and aperture. To use FV lock: 1 Assign FV lock to a camera control. Assign FV lock to a control using Custom Setting f1 (Custom control assignment, 0 266). 2 Select TTL flash control.
4 Focus. Position the subject in the center of the frame and press the shutter-release button halfway to focus. 5 Lock flash level. After confirming that the flash-ready indicator (M) is displayed, press the control selected in Step 1. The flash will emit a monitor preflash to determine the appropriate flash level. Flash output will be locked at this level and an FV lock icon (e) will appear in the display. 6 Recompose the photograph. 7 Take the photograph.
A Metering When the built-in flash is used without an external flash unit, the metering area for FV lock is confined to a 4-mm circle in the center of the frame. When the built-in flash is used as a master flash controlling remote flash units, the camera meters the entire frame.
Viewing Information for the Built-in Flash In modes P, S, A, and M, you can press the R button to view flash info in the information display (0 201) when the built-in flash is raised. The information displayed varies with the flash control mode. ❚❚ TTL 1 2 3 4 Flash-ready indicator ...................55 Flash control mode.....................164 Flash mode ...................................162 Flash compensation ...................
A Flash Info and Camera Settings The flash information display shows selected camera settings, including shooting mode, shutter speed, aperture, and ISO sensitivity.
Optional Flash Units You can: • Mount an optional flash unit on the accessory shoe (see the manual provided with the flash unit) • Control remote flash units with optical signals from the built-in flash (see the Menu Guide) • Control remote flash units with optical signals from an optional flash unit mounted on the accessory shoe (see the Menu Guide) • Mount an SB-5000 on the accessory shoe to control remote flash units with radio signals transmitted via a WR-R10, using settings chosen with the SB-5000 (
Remote Control Photography Using an Optional ML-L3 Remote Control The optional ML-L3 remote control (0 287) can be used to reduce camera shake or for self-portraits. 1 Select Remote control mode (ML-L3). Highlight Remote control mode (ML-L3) in the photo shooting menu and press 2. 2 Choose a remote control mode. Highlight one of the following options and press J. Option Description Shutter is released 2 s after ML-L3 shutter% Delayed remote release button is pressed.
4 Take the photograph. From a distance of 5 m (16 ft) or less, aim the transmitter on the ML-L3 at the infrared receiver on the camera and press the ML-L3 shutter-release button. In delayed remote mode, the self-timer lamp will light for about two seconds before the shutter is released. In quick-response remote mode, the self-timer lamp will flash after the shutter has been released.
A Using the Built-in Flash Before taking a photograph with the flash in manual pop-up modes (0 161), press the M (Y) button to raise the flash and wait for the flash-ready indicator (M) to be displayed (0 55). Shooting will be interrupted if the flash is raised while remote control mode is in effect. If the flash is required, the camera will only respond to the ML-L3 shutter-release button once the flash has charged.
A Exiting Remote Control Mode Remote control is cancelled automatically if no photograph is taken before the time selected for Custom Setting c5 (Remote on duration (ML-L3), 0 263), Off is selected for Remote control mode (ML-L3), a two-button reset is performed (0 206), or shooting options are reset using Reset photo shooting menu (0 252).
Recording and Viewing Movies Recording Movies Movies can be recorded in live view. 1 Rotate the live view selector to 1 (movie live view). Live view selector 2 Press the a button. The mirror will be raised and the view through the lens will be displayed in the camera monitor, modified for the effects of exposure. The subject will no longer be visible in the viewfinder. a button A The 0 Icon A 0 icon (0 185) indicates that movies can not be recorded.
3 Focus. Frame the opening shot and press the shutter-release button halfway to focus; to zoom in for precise focus as describe in “Live View Zoom Preview” (0 57), press the X (T) button. Note that the number of subjects that can be detected in face-priority AF drops during movie recording.
4 Start recording. Press the movie-record button to start recording. A recording indicator and the time available are displayed in the monitor. Exposure can be locked by pressing the A AE-L/AF-L button Movie-record button (0 125) or altered by up to ±3 EV in steps of 1/3 EV using exposure Recording indicator compensation (0 127); spot metering is not available. In autofocus mode, the camera can be refocused by pressing the shutter-release button halfway or by tapping your subject in the monitor.
5 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, or the memory card is full (note that depending on memory card write speed, shooting may end before the maximum length is reached). 6 Exit live view. Press the a button to exit live view. A See Also For information on: • Choosing how the camera focuses in movie mode, see “Autofocus” (0 100). • Focusing using the lens focus ring, see “Manual Focus” (0 115).
Using the i Button The options listed below can be accessed by pressing the i button in movie mode. Use the touch screen or navigate the menu using the multi selector and J button, using the multi selector to highlight items, pressing 2 to view options, and pressing J to select the highlighted option and return to the i-button menu. Press the i button again to exit to the shooting display. i button Option Description Choose image area Choose image area for movies (0 190).
Option Set Picture Control Monitor brightness Multi-selector power aperture Highlight display Description Choose Picture Control used for movies (0 148). Press 1 or 3 to adjust monitor brightness (note that this affects live view only and has no effect on photographs or movies or on the brightness of the monitor for menus or playback; 0 269). Select Enable to enable power aperture. Press 1 to widen the aperture, 3 to narrow the aperture.
The Live View Display: Movies Item q “No movie” icon w e r t y u i o !0 !1 Description Indicates that movies can not be recorded. Volume of audio output to headphones. Headphone volume Displayed when third-party headphones are connected (0 184). Microphone Microphone sensitivity (0 183). sensitivity Sound level for audio recording. Displayed in red Sound level if level is too high; adjust microphone sensitivity accordingly. Time remaining The recording time available for movies.
D The Count Down Display A count down will be displayed 30 s before live view ends automatically (the timer turns red if live view is about to end to protect the internal circuits or, if an option other than No limit is selected for Custom Setting c4—Monitor off delay > Live view; 0 263—5 s before the monitor is due to turn off automatically). Depending on shooting conditions, the timer may appear immediately when live view is selected.
Viewing and Hiding Indicators To hide or display indicators in the monitor, press the R button.
Frame Size, Frame Rate, and Movie Quality The Frame size/frame rate option in the movie shooting menu is used to choose the movie frame size (in pixels) and frame rate. You can also choose from two Movie quality options: high and normal. Together, these options determine the maximum bit rate, as shown in the following table.
Indices If Index marking is assigned to a control using Custom Setting g1 (Custom control assignment, 0 267), you can press the selected control during recording to add indices that can be used to locate frames during editing and playback (0 195; note that indices can not be added in i mode). Up to 20 indices can be added to each movie. Index A See Also For information on: • Frame size, frame rate, microphone sensitivity, and ISO sensitivity, see “The Movie Shooting Menu: Movie Shooting Options” (0 257).
The Movie Crop Movies have an aspect ratio of 16 : 9 and are recorded using a crop that varies with the frame size and the option selected for Choose image area in the movie shooting menu (0 188, 257). 1920 × 1080 and 1280 × 720 (DX) 1920 × 1080 and 1280 × 720 (1.3×) 3840 × 2160 Movie crop sizes are given below: • At a frame size of 3840 × 2160, the movie crop is approximately 16.2 × 9.1 mm, regardless of the option selected for Choose image area. The apparent focal length is approximately 1.
Taking Photos in Movie Mode To take photos in movie mode (either in live view or during movie recording), select Take photos for Custom Setting g1 (Custom control assignment) > Shutter-release button (0 267). Photos with an aspect ratio of 16 : 9 can then be taken at any time by pressing the shutter-release button all the way down. If movie recording is in progress, recording will end and the footage recorded to that point will be saved.
❚❚ Image Size The size of photos taken in movie mode varies with the movie frame size (0 188) and, in the case of photos taken at frame sizes of 1920 × 1080 and 1280 × 720, with the image area and the option selected for Image size in the photo shooting menu (0 99). Frame size 3840 × 2160 Image area Image size — DX 1920 × 1080 1280 × 720 1.
D Recording Movies Movies are recorded in the sRGB color space. Flicker, banding, or distortion may be visible in the monitor and in the final movie under fluorescent, mercury vapor, or sodium lamps or with subjects that are in motion, particularly if the camera is panned horizontally or an object moves horizontally at high speed through frame (for information on reducing flicker and banding, see Flicker reduction, 0 259). Flicker may also appear while power aperture is in use.
Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 225). Tap the a icon in the monitor or press J to start playback; your current position is indicated by the movie progress bar. 1 icon Length a icon Current position/total length Movie progress bar Volume Guide The following operations can be performed: To Pause Play Rewind/advance Start slow-motion playback 194 Description Press 3 to pause playback.
To Skip 10 s Skip ahead/back Adjust volume Trim movie Exit Description Rotate the main command dial one stop to skip ahead or back 10 s. Rotate the sub-command dial to skip to the next or previous index, or to skip to the last or first frame if the movie contains no indices. Press X (T) to increase volume, W (Z) to decrease. Press the i button to view movie editing options (0 196). Press 1 or K to exit to full-frame playback.
Editing Movies Trim footage to create edited copies of movies or save selected frames as JPEG stills. Option 9 Choose start/end point 4 Save selected frame Description Create a copy from which unwanted footage has been removed. Save a selected frame as a JPEG still. Trimming Movies To create trimmed copies of movies: 1 Display a movie full frame (0 225). 2 Pause the movie on the new opening frame.
3 Select Choose start/end point. Press the i button, then highlight Choose start/end point and press J. 4 Select Start point. To create a copy that begins from the current frame, highlight Start point and press J. The frames before the current frame will be removed when you save the copy in Step 9. Start point 5 Confirm the new start point.
6 Choose the end point. Press L (U) to switch from the start point (w) to the end point (x) selection tool and then select the closing frame as described in Step 5. The frames after the selected frame will be removed when you save the copy in L (U) button Step 9. End point 7 Create the copy. Once the desired closing frame is displayed, press 1. 8 Preview the movie. To preview the copy, highlight Preview and press J (to interrupt the preview and return to the save options menu, press 1).
9 Save the copy. Highlight Save as new file and press J to save the copy to a new file. To replace the original movie file with the edited copy, highlight Overwrite existing file and press J. A Trimming Movies Movies must be at least two seconds long. The copy will not be saved if there is insufficient space available on the memory card. Copies have the same time and date of creation as the original.
Saving Selected Frames To save a copy of a selected frame as a JPEG still: 1 Pause the movie on the desired frame. Play the movie back as described in “Viewing Movies” (0 194), pressing J to start and resume playback and 3 to pause. Pause the movie at the frame you intend to copy. 2 Choose Save selected frame. Press the i button, then highlight Save selected frame and press J to create a JPEG copy of the current frame (0 97).
Other Shooting Options The R Button (Viewfinder Photography) During viewfinder photography, you can press the R button to view an information display in the monitor listing such data as shutter speed, aperture, number of exposures remaining, and AFarea mode. R button Shooting mode ................................6 9 Image area indicator.................... 93 Flexible program indicator ......... 73 10 “k” (appears when memory remains for over 1000 Flash sync indicator....................265 exposures).....
12 Exposure indicator ........................77 Exposure compensation display.......................................... 127 Bracketing progress indicator Exposure and flash bracketing........................... 210 WB bracketing....................... 215 13 White balance ............................. 130 White balance fine-tuning indicator ...................................... 134 14 Image comment indicator ....... 270 15 Copyright information .............. 271 16 Image size.............................
23 Bluetooth connection indicator .......................................................273 Airplane mode.............................272 24 Wi-Fi connection indicator ..............................................272, 273 Eye-Fi connection indicator .....273 25 Satellite signal indicator............224 26 Long exposure noise reduction indicator.......................................255 27 Vignette control indicator ........255 28 Auto distortion control..............
A See Also For information on changing the color of the lettering in the information display, see B > Information display (0 269). A The Y (“Clock Not Set”) Icon The camera clock is powered by an independent, rechargeable power source, which is charged as necessary when the main battery is installed or the camera is powered by an optional power connector and AC adapter (0 287). Two days of charging will power the clock for about three months.
The i Button To access the options below, press the i button during viewfinder and live view photography. Use the touch screen or navigate the menu using the multi selector and J button, using the multi selector to highlight items and pressing J to view options. To return to shooting mode, press the shutter-release button halfway.
Two-Button Reset: Restoring Default Settings The camera settings listed below can be restored to default values by holding the W (Z) and E buttons down together for more than two seconds (these buttons are marked by a green dot). The control panel turns off briefly while settings are reset.
1 Current Picture Control only. 2 HDR strength is not reset. 3 If multiple exposure is currently in progress, shooting will end and multiple exposure will be created from exposures recorded to that point. Gain and number of shots are not reset. 4 If interval timer shooting is currently in progress, shooting will end. Starting date, time, shooting interval, number of intervals and shots, and exposure smoothing are not reset.
Option Default Focus point 1 Center Exposure preview Off Multi-selector power aperture Disable Highlight display Off Headphone volume 15 Metering Matrix AE lock hold Off Bracketing Off 2 Flash compensation Off Exposure compensation Off Flash mode i, k, p, n, w, f, d, ' Auto s Auto+red-eye reduction o Auto+slow sync 0, P, S, A, M Fill flash e Off FV lock Off Flexible program Off Exposure delay mode Off 1 Focus point not displayed if auto-area AF is selected for AF-area mode.
Bracketing (P, S, A, and M Modes Only) Bracketing automatically varies exposure, flash level, Active D-Lighting (ADL), or white balance slightly with each shot, “bracketing” the current value. Choose in situations in which getting the right settings is difficult and there is not time to check results and adjust settings with each shot, or to experiment with different settings for the same subject.
❚❚ Exposure and Flash Bracketing Vary exposure and/or flash level over a series of photographs. Exposure modified by: 0 EV Exposure modified by: –1 EV Exposure modified by: +1 EV 1 Choose the number of shots. Pressing the BKT button, rotate the main command dial to choose the number of shots in the bracketing sequence.
2 Select an exposure increment. Pressing the BKT button and rotate the sub-command dial to choose the exposure increment. Exposure increment BKT button Sub-command dial At default settings, the size of the increment can be chosen from 0.3 (1/3), 0.7 (2/3), 1, 2, and 3 EV. The bracketing programs with an increment of 0.3 (1/3) EV are listed below. Information display No. of shots 0 3 3 2 2 3 5 7 9 Bracketing order (EVs) 0 0/+0.3/+0.7 0/–0.7/–0.3 0/+0.3 0/–0.3 0/–0.3/+0.3 0/–0.7/–0.3/+0.3/+0.7 0/–1.0/–0.
3 Frame a photograph, focus, and shoot. The camera will vary exposure and/or flash level shot-by-shot according to the bracketing program selected. Modifications to exposure are added to those made with exposure compensation (0 127). A bracketing progress indicator is displayed while bracketing is in effect. A segment will disappear from the indicator after each shot. No. shots: 3; increment: 0.7 Display after first shot A Live View In live view, bracketing settings are displayed in the monitor.
❚❚ Canceling Bracketing To cancel bracketing, press the BKT button and rotate the main command dial until no shots remain in the bracketing sequence and the bracketing indicators in the control panel and viewfinder have turned off. The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (0 206), although in this case the bracketing program will not be restored the next time bracketing is activated.
A Exposure Bracketing The camera modifies exposure by varying shutter speed and aperture (mode P), aperture (mode S), or shutter speed (modes A and M).
❚❚ White Balance Bracketing The camera creates multiple copies of each photograph, each with a different white balance. 1 Choose the number of shots. Pressing the BKT button, rotate the main command dial to choose the number of shots in the bracketing sequence. Number of shots BKT button WB bracketing indicator Main command dial At settings other than zero, M and D are displayed respectively in the control panel and viewfinder; a y icon and a bracketing indicator appear in the information display.
2 Select a white balance increment. Pressing the BKT button, rotate the sub-command dial to choose the white balance adjustment. Each increment is roughly equivalent to 5 mired. White balance increment BKT button Sub-command dial Choose from increments of 1 (5 mired), 2 (10 mired), or 3 (15 mired). Higher B values correspond to increased amounts of blue, higher A values to increased amounts of amber (0 134). The bracketing programs with an increment of 1 are listed below. Information display 216 No.
3 Frame a photograph, focus, and shoot. Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. Modifications to white balance are added to the white balance adjustment made with white balance finetuning.
❚❚ Canceling Bracketing To cancel bracketing, press the BKT button and rotate the main command dial until no shots remain in the bracketing sequence and the bracketing indicators in the control panel and viewfinder have turned off. The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (0 206), although in this case the bracketing program will not be restored the next time bracketing is activated.
❚❚ ADL Bracketing The camera varies Active D-Lighting over a series of exposures. 1 Choose the number of shots. Pressing the BKT button, rotate the main command dial to choose the number of shots in the bracketing sequence. ADL bracketing amount BKT button Number of shots Main command dial At settings other than zero, M and D are displayed respectively in the control panel and viewfinder; a z icon and the bracketing amount appear in the information display.
Choose two shots to take one photograph with Active D-Lighting off and another at a selected value. Choose three to five shots to take a series of photographs with Active D-Lighting set to Off, Low, and Normal (three shots), Off, Low, Normal, and High (four shots), or Off, Low, Normal, High, and Extra high (five shots). If you choose more than two shots, proceed to Step 3. 2 Select Active D-Lighting. Pressing the BKT button, rotate the sub-command dial to choose Active D-Lighting.
3 Frame a photograph, focus, and shoot. The camera will vary Active D-Lighting shot-byshot according to the bracketing program selected. A bracketing progress indicator is displayed while bracketing is in effect. A segment will disappear from the indicator after each shot. No. shots: 3 Display after first shot A Live View In live view, bracketing settings are displayed in the monitor.
❚❚ Canceling Bracketing To cancel bracketing, press the BKT button and rotate the main command dial until no shots remain in the bracketing sequence and the bracketing indicators in the control panel and viewfinder have turned off. The program last in effect will be restored the next time bracketing is activated. Bracketing can also be cancelled by performing a two-button reset (0 206), although in this case the bracketing program will not be restored the next time bracketing is activated.
Location Data The GP-1/GP-1A GPS unit (available separately) can be connected to the camera’s accessory terminal (0 1) using the cable supplied with the GP-1/GP-1A, allowing information on the camera’s current position to be recorded when photographs are taken. Turn the camera off before connecting the GP-1/ GP-1A; for more information, see the GP-1/GP-1A manual. ❚❚ Setup Menu Options The Location data item in the setup menu contains the options listed below.
A Smart Devices To download location data from a smart device and embed it in subsequent photographs, establish a wireless connection and select Yes for Location data > Download from smart device in the setup menu (0 271). A Coordinated Universal Time (UTC) UTC data is provided by the GPS device and is independent of the camera clock. A The o Icon Connection status is shown by the o icon: • o (static): Location data acquired. • o (flashing): The GP-1/GP-1A is searching for a signal.
More on Playback Viewing Images W (Z) W (Z) X (T) X (T) Full-frame playback Thumbnail playback Calendar playback Full-Frame Playback To play photographs back, press the K button. The most recent photograph will be displayed in the monitor. Additional pictures can be displayed by flicking left or right or pressing 4 or 2; to view additional information on the current K button photograph, press 1 or 3 (0 231).
Calendar Playback To view images taken on a selected date, press the W (Z) button when 72 images are displayed. W (Z) button Use the touch screen or multi selector Date list to highlight dates in the date list; the pictures taken on the selected date appear in the thumbnail list.
A Rotate Tall To display “tall” (portrait-orientation) photographs in tall orientation, select On for the Rotate tall option in the playback menu (0 251). A Image Review When On is selected for Image review in the playback menu (0 250), photographs are automatically displayed in the monitor after shooting (because the camera is already in the correct orientation, images are not rotated automatically during image review).
Using the Touch Screen During playback, the touch-sensitive monitor can be used to: Flick left or right to view other images. View other images In full frame view, you can touch the bottom of the display to display a frame advance bar, then slide your finger left or right to scroll rapidly to other images. Scroll rapidly to other images Frame advance bar Use stretch and pinch gestures to zoom in and out and slide to scroll (0 240).
To “zoom out” to a thumbnail view (0 225), use a pinch gesture in full-frame View thumbnails playback. Use pinch and stretch to choose the number of images displayed from 4, 9, and 72 frames. Tap the on-screen guide to start movie playback (movies are indicated by a 1 icon). Tap the display to pause or resume, or tap 6 to exit to full-frame playback (note that some of the icons in the View movies movie playback display do not respond to touch-screen operations).
The i Button Pressing the i button during full-frame or thumbnail playback displays the options listed below. Select options using the touch screen or the multi selector and J button. • Rating: Rate the current picture (0 243). i button • Select to send to smart device/deselect (photographs only): Select photos for upload to a smart device. • Retouch (photographs only): Use the options in the retouch menu (0 275) to create a retouched copy of the current photograph.
Photo Information Photo information is superimposed on images displayed in fullframe playback. Press 1 or 3 to cycle through photo information. Note that “image only”, shooting data, RGB histograms, highlights, and overview data are only displayed if corresponding option is selected for Playback display options (0 250). Location data are only displayed if embedded in the picture (0 223).
❚❚ File Information Protect status............................... 242 8 Image size .......................................99 Retouch indicator ....................... 275 9 Image area ......................................93 Upload marking.......................... 245 10 Time of recording....................... 268 Focus point * ................................. 107 11 Date of recording ....................... 268 AF area brackets * ...........................51 12 Rating..................................
❚❚ Highlights 1 Image highlights * 2 Folder number—frame number ........................................252 3 Current channel * *Flashing areas indicate highlights (areas that may be overexposed) for the current channel.
❚❚ RGB Histogram 1 Image highlights * 2 Folder number—frame number ........................................ 252 3 White balance ............................. 130 Color temperature ............... 137 White balance fine-tuning.......................... 134 Preset manual ....................... 139 4 Current channel * 5 Histogram (RGB channel). In all histograms, horizontal axis gives pixel brightness, vertical axis number of pixels.
A Playback Zoom To zoom in on the photograph when the histogram is displayed, press X (T). Use the X (T) and W (Z) buttons to zoom in and out and scroll the image with the multi selector. The histogram will be updated to show only the data for the portion of the image visible in the monitor. A Histograms Camera histograms are intended as a guide only and may differ from those displayed in imaging applications.
❚❚ Shooting Data 1 Metering ....................................... 123 7 White balance ............................. 130 Shutter speed ..........................74, 76 Color temperature ............... 137 White balance fine-tuning ... 134 Aperture....................................75, 76 Preset manual ....................... 139 2 Shooting mode ................................6 ISO sensitivity 1 ............................ 118 8 Color space ..................................
16 Picture Control 4...........................148 17 High ISO noise reduction..........255 20 Vignette control .......................... 255 Long exposure noise 21 Retouch history........................... 275 reduction .....................................255 22 Image comment ......................... 270 18 Active D-Lighting........................153 19 HDR strength ...............................
23 Name of photographer 5 ........... 271 24 Copyright holder 5 ...................... 271 1 Displayed in red if photo was taken with auto ISO sensitivity control on. 2 Displayed if Custom Setting b6 (Fine-tune optimal exposure, 0 262) has been set to a value other than zero for any metering method. 3 Displayed only if VR lens is attached. 4 Items displayed vary with Picture Control selected.
❚❚ Overview Data 1 Frame number/total number of 16 Rating ............................................ 243 images 17 Metering ....................................... 123 2 Upload marking ..........................245 18 Shooting mode ................................6 3 Protect status...............................242 19 Shutter speed ..........................74, 76 4 Retouch indicator .......................275 20 Aperture....................................75, 76 5 Camera name 21 ISO sensitivity * ......
Taking a Closer Look: Playback Zoom To zoom in on an image displayed in fullframe playback, press the X (T) button or give the display two quick taps. The following operations can be performed while zoom is in effect: X (T) button To Description Press X (T) or use stretch gestures to zoom in to a maximum of approximately 34× (large images in 24 × 16/ DX format), 26× (medium images) or 17× (small images). Press W (Z) or use pinch Zoom in or out/ gestures to zoom out.
To Crop image Select faces Description To crop the image to the area currently visible in the monitor, press i, highlight Quick crop, and press J. Note that Quick crop is not available when the RGB histogram is displayed (0 235). Faces detected during On-screen guide zoom are indicated by white borders in the navigation window. Rotate the subcommand dial or tap the on-screen guide to view other faces.
Protecting Photographs from Deletion In full-frame, zoom, thumbnail, and calendar playback, the L (U) button can be used to protect photographs from accidental deletion. Protected files can not be deleted using the O (Q) button or the Delete option in the playback menu. Note that protected images will be deleted when the memory card is formatted (0 268). To protect a photograph: 1 Select an image. Display the image in full-frame playback or playback zoom or highlight it in the thumbnail list.
Rating Pictures Rate pictures or mark them as candidates for later deletion. Ratings can also be viewed in ViewNX-i and Capture NX-D. Rating is not available with protected images. Rating Individual Pictures 1 Select an image. Display or highlight the image. 2 Display playback options. Press the i button to display playback options. i button 3 Select Rating. Highlight Rating and press J. 4 Choose a rating.
Rating Multiple Pictures Use the Rating option in the playback menu to rate multiple pictures. 1 Select Rating. Highlight Rating in the playback menu and press 2. 2 Rate pictures. Use the multi selector to highlight pictures (to view the currently highlighted picture full frame, press and hold the X/T button) and then press and hold the W (Z) button while pressing 1 or 3 to choose a rating of from zero to five stars, or select ) to mark the picture as a candidate for later deletion.
Selecting Photos for Upload Follow the steps below to select photos for upload to the smart device. Movies can not be selected for upload. Selecting Individual Photos 1 Select a photo. Display the photo or highlight it in the thumbnail list in thumbnail playback. 2 Display playback options. Press the i button to display playback options. i button 3 Choose Select to send to smart device/deselect. Highlight Select to send to smart device/deselect and press J.
Selecting Multiple Photos Follow the steps below to change the upload status of multiple photos. 1 Choose Select image(s). In the playback menu, select Select to send to smart device, then highlight Select image(s) and press 2. 2 Select photos. Use the multi selector to highlight photos and press the W (Z) button to select or deselect (to view the highlighted picture full screen, press and hold the X/T button). Selected photos are marked by a W icon. 3 Press J. Press J to complete the operation.
Deleting Photographs To delete the current photograph, press the O (Q) button. To delete multiple selected photographs, all photographs taken on a selected date, or all photographs in the current playback folder, use the Delete option in the playback menu. Once deleted, photographs can not be recovered. Note that pictures that are protected or hidden can not be deleted. During Playback Press the O (Q) button to delete the current photograph. 1 Press the O (Q) button.
The Playback Menu The Delete option in the playback menu contains the following options. Note that depending on the number of images, some time may be required for deletion. Option Q Selected n Select date R All Description Delete selected pictures (0 248). Delete all pictures taken on a selected date (0 249). Delete all pictures in the folder currently selected for playback (0 250). ❚❚ Selected: Deleting Selected Photographs 1 Select pictures.
❚❚ Select Date: Deleting Photographs Taken on a Selected Date 1 Select dates. Highlight a date and press 2 to select all pictures taken on the highlighted date. Selected dates are marked with a M icon. Repeat as desired to select additional dates; to deselect a date, highlight it and press 2. 2 Press J to complete the operation. A confirmation dialog will be displayed; highlight Yes and press J.
Menu List This section lists the options available in the camera menus. For more information, see the Menu Guide. D The Playback Menu: Managing Images Delete Selected Select date All Playback folder (Folder name) All Current Hide image Select/set Select date Deselect all Playback display options Basic photo info Focus point Additional photo info None (image only) Highlights RGB histogram Shooting data Overview Image review On Off 250 Delete multiple images (0 248).
After delete Show next Show previous Continue as before Auto image rotation On Off Rotate tall On Off Slide show Start Image type Frame interval Rating (defaults to Show next) Choose the picture displayed after an image is deleted. (defaults to On) Choose whether to record camera orientation when taking photographs. (defaults to On) Choose whether to rotate “tall” (portrait-orientation) pictures for display during playback (0 227). View a slide show of the pictures in the current playback folder.
C The Photo Shooting Menu: Photo Shooting Options Reset photo shooting menu Yes No Storage folder Rename Select folder by number Select folder from list File naming File naming Flash control Flash control mode (built-in) Flash control mode (external) Wireless flash options Group flash options Radio remote flash info Choose image area DX (24×16) 1.3× (18×12) 252 Select Yes to restore photo shooting menu options to their default values. Select the folder in which subsequent images will be stored.
Image quality NEF (RAW) + JPEG fine★ NEF (RAW) + JPEG fine NEF (RAW) + JPEG normal★ NEF (RAW) + JPEG normal NEF (RAW) + JPEG basic★ NEF (RAW) + JPEG basic NEF (RAW) JPEG fine★ JPEG fine JPEG normal★ JPEG normal JPEG basic★ JPEG basic Image size Large Medium Small NEF (RAW) recording NEF (RAW) compression NEF (RAW) bit depth ISO sensitivity settings ISO sensitivity Auto ISO sensitivity control (defaults to JPEG normal) Choose a file format and compression ratio (image quality, 0 97).
White balance Auto Incandescent Fluorescent Direct sunlight Flash Cloudy Shade Choose color temp. Preset manual Set Picture Control Auto Standard Neutral Vivid Monochrome Portrait Landscape Flat Manage Picture Control Save/edit Rename Delete Load/save Color space sRGB Adobe RGB Active D-Lighting Auto Extra high High Normal Low Off 254 (defaults to Auto) Match white balance to the light source (0 130). (defaults to Auto) Choose how new photos will be processed.
Long exposure NR On Off High ISO NR High Normal Low Off Vignette control High Normal Low Off Auto distortion control On Off Flicker reduction Flicker reduction setting Flicker reduction indicator (defaults to Off) Reduce “noise” (bright spots or fog) in photos taken at slow shutter speeds. (defaults to Normal) Reduce “noise” (randomly-spaced bright pixels) in photos taken at high ISO sensitivities.
Remote control mode (ML-L3) Delayed remote Quick-response remote Remote mirror-up Off Auto bracketing set AE & flash bracketing AE bracketing Flash bracketing WB bracketing ADL bracketing Multiple exposure Multiple exposure mode Number of shots Overlay mode Keep all exposures HDR (high dynamic range) HDR mode HDR strength Interval timer shooting Start Start options Interval No.
1 The Movie Shooting Menu: Movie Shooting Options Reset movie shooting menu Yes No File naming Choose image area DX 1.
White balance Same as photo settings Auto Incandescent Fluorescent Direct sunlight Cloudy Shade Choose color temp. Preset manual Set Picture Control Same as photo settings Auto Standard Neutral Vivid Monochrome Portrait Landscape Flat Manage Picture Control Save/edit Rename Delete Load/save Active D-Lighting Same as photo settings Extra high High Normal Low Off 258 (defaults to Same as photo settings) Choose the white balance for movies (0 130).
High ISO NR High Normal Low Off Flicker reduction Auto 50 Hz 60 Hz Microphone sensitivity Auto sensitivity Manual sensitivity Microphone off Frequency response Wide range Vocal range Wind noise reduction On Off Electronic VR On Off Time-lapse movie Start Interval Shooting time Exposure smoothing (defaults to Normal) Reduce “noise” (randomly-spaced bright pixels) in movies recorded at high ISO sensitivities.
A Custom Settings: Fine-Tuning Camera Settings Reset custom settings Yes No a Autofocus a1 AF-C priority selection Release Focus a2 AF-S priority selection Release Focus a3 Focus tracking with lock-on 5 (Long)–1 (Short), Off a4 Number of focus points 51 points 11 points 260 Select Yes to restore Custom Settings to their default values.
a5 Store points by orientation Yes Off a6 AF activation Shutter/AF-ON AF-ON only a7 Focus point wrap-around Wrap No wrap a8 Focus point options Focus point illumination Manual focus mode a9 Built-in AF-assist illuminator On Off a10 Manual focus ring in AF mode Enable Disable b Metering/exposure b1 ISO sensitivity step value 1/3 step 1/2 step (defaults to Off) Choose whether the viewfinder stores the focus points for vertical and horizontal orientations separately.
b2 EV steps for exposure cntrl 1/3 step 1/2 step b3 Easy exposure compensation On (Auto reset) On Off b4 Matrix metering Face detection on Face detection off b5 Center-weighted area 6 mm– 13 mm, Average b6 Fine-tune optimal exposure Yes No c Timers/AE lock c1 Shutter-release button AE-L On (half press) On (burst mode) Off 262 (defaults to 1/3 step) Select the increments used when making adjustments to shutter speed, aperture, exposure and flash compensation, and bracketing.
c2 Standby timer 4 s–30 min, No limit c3 Self-timer Self-timer delay Number of shots Interval between shots c4 Monitor off delay Playback Menus Information display Image review Live view c5 Remote on duration (ML-L3) 1 min–15 min d Shooting/display d1 CL mode shooting speed 7 fps–1 fps d2 Max. continuous release 1–100 (defaults to 6 s) Choose how long the camera continues to meter exposure when no operations are performed (0 54).
d3 Exposure delay mode 3 s–1 s, Off (defaults to Off) In situations where the slightest camera movement can blur pictures, select 1 s, 2 s, or 3 s to delay shutter release until approximately one, two, or three seconds after the mirror is raised. d4 Electronic front-curtain shutter (defaults to Disable) Enable Enable or disable the electronic frontcurtain shutter in MUP mode, eliminating Disable blur caused by shutter motion.
d9 Optical VR On Off e Bracketing/flash e1 Flash sync speed 1/320 s (Auto FP), 1/250 s (Auto FP), 1/250 s–1/60 s e2 Flash shutter speed 1/60 s–30 s e3 Exposure comp. for flash Entire frame Background only (defaults to On) Turn vibration control on or off. This item is available only with lenses that support it. (defaults to 1/250 s) Choose a flash sync speed. (defaults to 1/60 s) Choose the slowest shutter available when the flash is used in modes P and A.
e4 Auto M ISO sensitivity control Subject and background Subject only e5 Bracketing order MTR > under > over Under > MTR > over f Controls f1 Custom control assignment Fn1 button Fn1 button + y Fn2 button Fn2 button + y AE-L/AF-L button AE-L/AF-L button + y BKT button + y Movie record button + y f2 OK button Shooting mode Playback mode Live view f3 Customize command dials Reverse rotation Change main/sub Menus and playback Sub-dial frame advance 266 (defaults to Subject and background) Choose whether aut
f4 Release button to use dial Yes No f5 Reverse indicators g Movie g1 Custom control assignment Fn1 button Fn2 button AE-L/AF-L button Shutter-release button (defaults to No) Selecting Yes allows adjustments that are normally made by holding a button and rotating a command dial to be made by rotating the command dial after the button is released. Setting ends when the button is pressed again, the shutter-release button is pressed halfway, or the standby timer expires.
B The Setup Menu: Camera Setup Format memory card To begin formatting, select Yes. Note that formatting permanently deletes all pictures and other data on the card. Before formatting, be sure to make backup copies as required. Save user settings Save to U1 Save to U2 Reset user settings Reset U1 Reset U2 Language See page 323. Time zone and date Time zone Date and time Sync with smart device Date format Daylight saving time Assign frequently-used settings to the U1 and U2 positions on the mode dial (0 83).
Monitor brightness Menus/playback Live view Monitor color balance Adjust the brightness of the menu, playback, and live view displays. Adjust monitor color balance. Virtual horizon Information display Auto Manual Auto info display On Off Info display auto off On Off AF fine-tune AF fine-tune (On/Off) Saved value Default List saved values Clean image sensor Clean now Clean at startup/shutdown Lock mirror up for cleaning View a virtual horizon based on information from the camera tilt sensor.
Image Dust Off ref photo Start Clean sensor and then start Image comment Attach comment Input comment Acquire reference data for the Image Dust Off option in Capture NX-D (0 iv). Add a comment to new photographs as they are taken. Comments can be viewed as metadata in ViewNX-i or Capture NX-D (0 iv). A Text Entry A keyboard is displayed when text entry is required.
Copyright information Attach copyright information Artist Copyright Beep options Beep on/off Volume Pitch Touch controls Enable/disable touch controls Full-frame playback flicks Flash warning On Off HDMI Output resolution Advanced Location data Download from smart device Position External GPS device options Wireless remote (WR) options LED lamp Link mode Add copyright information to new photographs as they are taken. Copyright information can be viewed as metadata in ViewNX-i or in Capture NX-D (0 iv).
Assign remote (WR) Fn button FV lock AE/AF lock AE lock only AE lock (Reset on release) AF lock only AF-ON Modeling flash Flash off + NEF (RAW) Live view Same as camera Fn1 button Same as camera Fn2 button Same as camera 4 button None Airplane mode Enable Disable Connect to smart device Start Password protection 272 (defaults to None) Choose the role played by the Fn button on optional wireless remote controllers.
Send to smart device (auto) On Off Wi-Fi Network settings Current settings Reset connection settings Bluetooth Network connection Paired devices Send while off Eye-Fi upload Enable Disable (defaults to Off) Select On to upload photos to a smart device as they are taken. Adjust Wi-Fi (wireless LAN) settings for connection to smart devices. Adjust settings for Bluetooth connections to smart devices. (defaults to Enable) Upload pictures to a preselected destination.
Save/load settings Save settings Load settings Reset all settings Reset Do not reset Save camera settings to or load camera settings from a memory card. Settings files can be shared with other D7500 cameras. Reset all settings apart from the options selected for Language and Time zone and date in the setup menu. Firmware version View the current camera firmware version. D Reset All Settings Copyright information and other user-generated entries are also reset.
N The Retouch Menu: Creating Retouched Copies NEF (RAW) processing Select image(s) Select date Select all images Trim Create JPEG copies of NEF (RAW) photographs. Create a cropped copy of the selected photograph. Resize Select image(s) Choose size D-Lighting Create small copies of selected photographs. Brighten shadows. Choose for dark or backlit photographs. Quick retouch Create copies with enhanced saturation and contrast. Red-eye correction Correct “red-eye” in photos taken with a flash.
Perspective control Create copies that reduce the effects of perspective taken from the base of a tall object. Fisheye Create copies that appear to have been taken with a fisheye lens.
Miniature effect Create a copy that appears to be a photo of a diorama. Use the multi selector to choose the position and orientation of the area in focus. Works best with photos taken from a high vantage point. Selective color Create a copy in which only selected hues appear in color. Position the cursor over objects with desired colors and press the A AE-L/AF-L button.
O My Menu/m Recent Settings Add items PLAYBACK MENU PHOTO SHOOTING MENU MOVIE SHOOTING MENU CUSTOM SETTING MENU SETUP MENU RETOUCH MENU Remove items Create a custom menu of up to 20 items selected from the playback, photo shooting, movie shooting, Custom Setting, setup, and retouch menus. Delete items from My Menu. Rank items Choose tab MY MENU RECENT SETTINGS 278 Rank items in My Menu. (defaults to MY MENU) Choose the menu displayed in the “My Menu/Recent Settings” tab.
Technical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error message is displayed or you encounter problems using the camera. Compatible Lenses Compatible CPU Lenses Nikon recommends CPU lenses (IX Nikkor lenses excluded) and in particular type G, E, and D lenses, which support the full range of features offered by the camera.
6 Vibration Reduction (VR) supported with VR lenses. 7 The shift knob for the PC-E NIKKOR 24mm f/3.5D ED may contact the camera body when the lens is rotated. In addition, some combinations of shift and rotation may not be available due to the lens contacting the camera body. 8 Shifting and/or tilting the lens interferes with exposure. 9 Can not be used with shifting or tilting. 10 Some combinations of shift and rotation may not be available due to the lens contacting the camera body.
A AF-S/AF-I Teleconverters If the combined aperture when the camera is used with an AF-S/AF-I teleconverter is slower than f/5.6 but is equal to or faster than f/8, autofocus and electronic rangefinding will be available only with the center focus point and the camera may be unable to focus on dark or low-contrast subjects. Single point AF is used when 3D-tracking or auto-area AF is selected for AF-area mode (0 103).
A VR Lenses The lenses listed below are not recommended for long exposures or photographs taken at high ISO sensitivities, as due to the design of the vibration reduction (VR) control system the resulting photos may be marred by fog. We recommend turning vibration reduction off when using other VR lenses. • AF-S VR Zoom-Nikkor 24–120mm • AF-S NIKKOR 400mm f/2.8G ED VR f/3.5–5.6G IF-ED • AF-S NIKKOR 500mm f/4G ED VR • AF-S VR Zoom-Nikkor 70–200mm f/2.8G • AF-S DX VR Zoom-Nikkor 18–200mm IF-ED f/3.5–5.
A The Built-in Flash The built-in flash has a minimum range of 0.6 m (2 ft) and can not be used in the macro range of macro zoom lenses. It can be used with CPU lenses with focal lengths of 16–300 mm, although in some cases the flash may be unable to entirely light the subject at some ranges or focal lengths due to shadows cast by the lens. The following illustrations show the effect of vignetting caused by shadows cast by the lens when the flash is used.
A Calculating Angle of View The size of the area exposed by a 35mm camera is 36 × 24 mm. The size of the area exposed by the D7500 when DX (24×16) is selected for Choose image area in the photo shooting menu, in contrast, is 23.5 × 15.7 mm, meaning that the angle of view of a 35mm camera is approximately 1.5 times that of the D7500 (when 1.3× (18×12) is selected, the size of the area exposed decreases, further reducing the angle of view by about 1.3×).
Compatible Non-CPU Lenses Non-CPU lenses may only be used when the camera is in mode M. Selecting another mode disables the shutter release. Aperture must be adjusted manually via the lens aperture ring and the camera metering system, i-TTL flash control, and other features requiring a CPU lens can not be used. Some non-CPU lenses can not be used; see “Incompatible Accessories and Non-CPU Lenses” (0 286).
D Incompatible Accessories and Non-CPU Lenses The following can NOT be used with the D7500: • TC-16A AF teleconverter • Non-AI lenses • Lenses that require the AU-1 focusing unit (400mm f/4.5, 600mm f/5.6, 800mm f/8, 1200mm f/11) • Fisheye (6mm f/5.6, 7.5mm f/5.6, 8mm f/8, OP 10mm f/5.6) • 2.1cm f/4 • Extension Ring K2 • 180–600mm f/8 ED (serial numbers 174041–174180) • 360–1200mm f/11 ED (serial numbers 174031–174127) • 200–600mm f/9.
Other Accessories At the time of writing, the following accessories were available for the D7500.
Caring for the Camera Storage When the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area.
Image Sensor Cleaning If you suspect that dirt or dust on the image sensor is appearing in photographs, you can clean the sensor using the Clean image sensor option in the setup menu. The sensor can be cleaned at any time using the Clean now option, or cleaning can be performed automatically when the camera is turned on or off. ❚❚ “Clean Now” Holding the camera base down, select Clean image sensor in the setup menu, then highlight Clean now and press J.
❚❚ “Clean at Startup/Shutdown” Choose from the following options: Option 5 6 7 Description The image sensor is automatically cleaned Clean at startup each time the camera is turned on. The image sensor is automatically cleaned Clean at shutdown during shutdown each time the camera is turned off. Clean at startup & The image sensor is cleaned automatically at shutdown startup and at shutdown. Cleaning off Automatic image sensor cleaning off. 1 Select Clean at startup/shutdown.
D Image Sensor Cleaning Using camera controls during startup interrupts image sensor cleaning. Image sensor cleaning may not be performed at startup if the flash is charging. If dust can not be fully removed using the options in the Clean image sensor menu, clean the image sensor manually (0 292) or consult a Nikon-authorized service representative. If image sensor cleaning is performed several times in succession, image sensor cleaning may be temporarily disabled to protect the camera’s internal circuitry.
❚❚ Manual Cleaning If foreign matter can not be removed from the image sensor using the Clean image sensor option in the setup menu (0 289), the sensor can be cleaned manually as described below. Note, however, that the sensor is extremely delicate and easily damaged. Nikon recommends that the sensor be cleaned only by Nikon-authorized service personnel. 1 Charge the battery or connect an AC adapter. A reliable power source is required when inspecting or cleaning the image sensor.
4 Press J. A message will be displayed in the monitor and a row of dashes will appear in the control panel and viewfinder. To restore normal operation without inspecting the image sensor, turn the camera off. 5 Raise the mirror. Press the shutter-release button all the way down. The mirror will be raised and the shutter curtain will open, revealing the image sensor. The display in the viewfinder will turn off and the row of dashes in the control panel will flash. 6 Examine the image sensor.
7 Clean the sensor. Remove any dust and lint from the sensor with a blower. Do not use a blower-brush, as the bristles could damage the sensor. Dirt that can not be removed with a blower can only be removed by Nikon-authorized service personnel. Under no circumstances should you touch or wipe the sensor. 8 Turn the camera off. The mirror will return to the down position and the shutter curtain will close. Replace the lens or body cap.
D Foreign Matter on the Image Sensor Foreign matter entering the camera when lenses or body caps are removed or exchanged (or in rare circumstances lubricant or fine particles from the camera itself ) may adhere to the image sensor, where it may appear in photographs taken under certain conditions.
Caring for the Camera and Battery: Cautions Do not drop: The product may malfunction if subjected to strong shocks or vibration. Keep dry: This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage. Avoid sudden changes in temperature: Sudden changes in temperature, such as those that occur when entering or leaving a heated building on a cold day, can cause condensation inside the device.
Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly. In rare instances, static electricity may cause LCD displays to light up or go dark. This does not indicate a malfunction, and the display will soon return to normal. The lens and mirror are easily damaged.
Notes on the monitor: The monitor is constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device. Images in the monitor may be difficult to see in a bright light.
• The internal temperature of the battery may rise while the battery is in use. Attempting to charge the battery while the internal temperature is elevated will impair battery performance, and the battery may not charge or charge only partially. Wait for the battery to cool before charging. • Charge the battery indoors at ambient temperatures of 5 °C–35 °C (41 °F–95 °F).
• A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replacement. Purchase a new EN-EL15a battery. • The supplied power cable and AC wall adapter are for use with the MH-25a only. Use the charger with compatible batteries only. Unplug when not in use. • Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger. • Charge the battery before use.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Battery/Display The camera is on but does not respond: Wait for recording to end. If the problem persists, turn the camera off. If the camera does not turn off, remove and reinsert the battery or, if you are using an AC adapter, disconnect and reconnect the AC adapter.
Shooting (All Modes) Camera takes time to turn on: Delete files or folders. Shutter-release disabled: • Memory card is locked, full, or not inserted (0 21, 22). • Release locked is selected for Slot empty release lock in the setup menu (0 273) and no memory card is inserted (0 21). • Built-in flash is charging (0 55). • Aperture ring for CPU lens not locked at highest f-number (does not apply to type G and E lenses). • Non-CPU lens is attached but camera is not in mode M (0 72).
Focus does not lock when shutter-release button is pressed halfway: Use A AE-L/AF-L button to lock focus when AF-C is selected for focus mode or when photographing moving subjects in AF-A mode. Can not select focus point: • Unlock focus selector lock (0 107). • Auto-area AF selected, or face-priority AF selected in live view; choose another mode (0 103). • Camera is in playback mode (0 225) or menus are in use (0 250). • Press shutter-release button halfway to start standby timer (0 54).
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appear in photos: • Bright spots, randomly-spaced bright pixels, fog, and lines can be reduced by lowering ISO sensitivity. • Use the Long exposure NR option in the photo shooting menu to limit the occurrence of bright spots or fog in photos taken at shutter speeds slower than 1 s (0 255).
Live view ends unexpectedly or does not start: Live view may end automatically to prevent damage to the camera’s internal circuits if: • The ambient temperature is high • The camera has been used for extended periods in live view or to record movies • The camera has been used in continuous release modes for extended periods If live view does not start when you press the a button, wait for the internal circuits to cool and then try again.
White balance bracketing unavailable: • NEF (RAW) or NEF+JPEG image quality option selected for image quality (0 97). • Multiple exposure mode is in effect (0 256). Effects of Picture Control differ from image to image: Auto is selected for Set Picture Control, a Picture Control based on Auto is selected, or A (auto) is selected for sharpening, clarity, contrast, or saturation. For consistent results over a series of photos, choose another setting (0 151).
Can not retouch picture: Photo can not be further edited with this camera. Can not select photo for printing: Photo is in NEF (RAW) format. Transfer photos to computer and print using Capture NX-D (0 iv). NEF (RAW) photos can be saved in JPEG format using NEF (RAW) processing (0 275). Photo is not displayed on high-definition video device: Confirm that HDMI cable (available separately) is connected. Can not transfer photos to computer: OS not compatible with camera or transfer software.
Bluetooth and Wi-Fi (Wireless Networks) Smart devices do not display the camera SSID (network name): • Confirm that Disable is selected for Airplane mode in the camera setup menu (0 272). • Confirm that Enable is selected for Bluetooth > Network connection in the camera setup menu. • Try turning the smart device Wi-Fi off and then on again. Can not connect to wireless printers and other wireless devices: This camera can connect only to devices to which the SnapBridge app has been installed.
Error Messages This section lists the indicators and error messages that appear in the viewfinder, control panel, and monitor. Indicator Control Viewpanel finder Problem B (flashes) Lens aperture ring is not set to minimum aperture. H d Low battery. • Battery exhausted. • Battery can not be used. Solution Set ring to minimum aperture (highest f-number; 0 72). Ready a fully-charged spare battery (0 19). • Recharge or replace battery (0 19, 21, 287). • Contact Nikonauthorized service representative.
Indicator Control Viewpanel finder (Exposure indicators and shutter speed or aperture display flash) A (flashes) % (flashes) P k (flashes) (flashes) 310 Problem Solution • Use a lower ISO sensitivity (0 118). • In shooting mode: P Use a third-party ND filter Subject too bright; photo S Increase shutter speed will be overexposed. (0 74) A Choose a smaller aperture (higher f-number; 0 75) % Choose another shooting mode (0 6) • Use a higher ISO sensitivity (0 118).
Indicator Control Viewpanel finder Problem Solution Check photo in monitor; if If indicator flashes for 3s M underexposed, adjust — after flash fires, photo (flashes) settings and try again may be underexposed. (0 225). • Reduce quality or size (0 97, 99). Memory insufficient to • Delete photographs after record further photos at n j copying important current settings, or images to computer or (flashes) (flashes) camera has run out of file other device (0 247). or folder numbers.
Indicator Monitor No memory card. Control panel Problem Camera cannot S detect memory card. • Error accessing memory card. Cannot access this W, memory card. O Insert another card. (flashes) g W, O (flashes) Memory card is W, locked. Slide lock to X “write” position. (flashes) W, Not available if O Eye-Fi card is locked. (flashes) 312 Solution Turn camera off and confirm that card is correctly inserted (0 21). • Use Nikon-approved card (0 346).
Indicator Monitor Control panel Problem Memory card has This card is not [C] not been formatted. (flashes) formatted for use Format the card. in camera. Camera clock is The clock is not set. — not set. Unable to start live view. Please wait. — Folder contains no images. — All images are hidden. — Cannot display this file. — Solution Format memory card or insert new memory card (0 21, 268). Set camera clock (0 268).
Indicator Monitor Control panel Solution Images created with other Cannot select this — devices can not be file. retouched. • Movies created with other devices can not be The selected edited. This movie cannot — movie can not be be edited. • Movies must be at least edited. two seconds long (0 196). Check printer. To resume, Check printer. — Printer error. select Continue (if available) *. Paper in printer is Insert paper of correct size Check paper. — not of selected and select Continue *. size.
Specifications ❚❚ Nikon D7500 Digital Camera Type Type Lens mount Effective angle of view Effective pixels Effective pixels Image sensor Image sensor Total pixels Dust-reduction System Storage Image size (pixels) Single-lens reflex digital camera Nikon F mount (with AF coupling and AF contacts) Nikon DX format; focal length in 35 mm [135] format equivalent to approx. 1.5× that of lenses with FX format angle of view 20.9 million 23.5 × 15.7 mm CMOS sensor 21.
Storage Image size (pixels) File format Picture Control System Media File system Viewfinder Viewfinder Frame coverage Magnification Eyepoint Diopter adjustment Focusing screen 316 • Photographs with image area of 1.3× taken during movie recording 4272 × 2400 (#: 10.2 million) 3200 × 1800 ($: 5.7 million) 2128 × 1192 (%: 2.5 million) • Photographs taken during movie recording at a frame size of 3840 × 2160: 3840 × 2160 (8.
Viewfinder Reflex mirror Lens aperture Lens Compatible lenses Quick return Instant return, electronically controlled Compatible with AF NIKKOR lenses, including type G, E, and D lenses (some restrictions apply to PC lenses) and AI-P NIKKOR lenses and nonCPU AI lenses (M mode only). IX NIKKOR lenses, lenses for the F3AF, and non-AI lenses can not be used. The electronic rangefinder can be used with lenses that have a maximum aperture of f/5.
Release Self-timer Remote control modes (ML-L3) Exposure Metering system 2 s, 5 s, 10 s, 20 s; 1–9 exposures at intervals of 0.5, 1, 2, or 3 s Delayed remote, quick-response remote, remote mirror-up TTL exposure metering using RGB sensor with approximately 180K (180,000) pixels Metering mode • Matrix: 3D color matrix metering III (type G, E, and D lenses); color matrix metering III (other CPU lenses) • Center-weighted: Weight of approximately 75% given to 8 mm circle in center of frame.
Exposure Exposure compensation Can be adjusted by –5 – +5 EV in increments of / or 1/2 EV in P, S, A, M, SCENE, and EFFECTS modes Exposure lock Luminosity locked at detected value ISO sensitivity ISO 100–51200 in steps of 1/3 or 1/2 EV. Can also (Recommended Exposure be set to approx. 0.3, 0.5, 0.7, or 1 EV (ISO 50 Index) equivalent) below ISO 100 or to approx. 0.3, 0.5, 0.
Flash Built-in flash Guide Number Flash control Flash mode Flash compensation Flash-ready indicator Accessory shoe Nikon Creative Lighting System (CLS) Sync terminal 320 i, k, p, n, o, s, w, f, d, e, ': Auto flash with auto pop-up P, S, A, M, 0: Manual pop-up with button release Approx.
White balance White balance Bracketing Bracketing types Live view Modes Lens servo AF-area mode Autofocus Movie Metering system Metering mode Frame size (pixels) and frame rate File format Video compression Auto (2 types), incandescent, fluorescent (7 types), direct sunlight, flash, cloudy, shade, preset manual (up to 6 values can be stored, spot white balance measurement available during live view), choose color temperature (2500 K–10,000 K), all with fine-tuning Exposure, flash, white balance, and AD
Movie Audio recording format Audio recording device Linear PCM, AAC Built-in stereo or external microphone; sensitivity adjustable ISO sensitivity • Mode M: Auto ISO sensitivity control (ISO 100 to (Recommended Exposure Hi 5) available with selectable upper limit; Index) manual selection (ISO 100 to 51200 in steps of 1/3 or 1/2 EV) with additional options available equivalent to approximately 0.3, 0.5, 0.
Interface USB HDMI output Accessory terminal Audio input Audio output Wireless/Bluetooth Wireless Bluetooth Range (line of sight) Supported languages Supported languages Hi-Speed USB with Micro-B connector; connection to built-in USB port is recommended Type C HDMI connector • Wireless remote controllers: WR-1, WR-R10 (available separately) • Remote cord: MC-DC2 (available separately) • GPS unit: GP-1/GP-1A (available separately) Stereo mini-pin jack (3.
Power source Battery AC adapter Tripod socket Tripod socket Dimensions/weight Dimensions (W × H × D) Weight One EN-EL15a rechargeable Li-ion battery EH-5b/EH-5c AC adapter; requires EP-5B power connector (available separately) / in. (ISO 1222) 14 Approx. 135.5 × 104 × 72.5 mm ( 5.4 × 4.1 × 2.9 in.) Approx. 720 g (1 lb 9.4 oz) with battery and memory card but without body cap; approx. 640 g (1 lb 6.
❚❚ MH-25a Battery Charger Rated input (in North America) Rated input (in other regions) Rated output Supported batteries Charging time Operating temperature Dimensions (W × H × D) Length of power cable (if supplied) Weight AC 120 V, 60 Hz, 0.2 A AC 100–240 V, 50/60 Hz, 0.23–0.12 A DC 8.4 V/1.2 A Nikon EN-EL15a rechargeable Li-ion batteries Approx. 2 hours and 35 minutes at an ambient temperature of 25 °C (77 °F) when no charge remains 0 °C–40 °C (+32 °F–104 °F) Approx. 95 × 33.5 × 71 mm (3.7 × 1.3 × 2.
A Supported Standards • DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • Exif version 2.31: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.31, a standard in which information stored with photographs is used for optimal color reproduction when the images are output on Exif-compliant printers.
A Trademark Information IOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and is used under license. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac, macOS, OS X, Apple®, App Store®, the Apple logos, iPhone®, iPad®, and iPod touch® are trademarks of Apple Inc. registered in the U.S. and/or other countries. Android is a trademark of Google Inc.
A Certificates 328
Lens Kits The camera can be purchased as a kit with the lens listed below. AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR This lens is for use exclusively with DX format Nikon digital camera. The parts of the lens are listed below. 1 Lens hood * ...................................334 8 Focus ring .....................................115 2 Lens hood lock mark ..................334 9 Lens mounting mark.................... 24 3 Lens hood alignment mark ......
❚❚ Focus Focus mode is determined by the camera focus mode and the position of the lens A-M mode switch. See the camera manual for information on camera focus mode selection. Camera focus mode AF MF Lens focus mode A M Autofocus with Manual focus with manual override * electronic rangefinder — * Manual override available only when single-servo AF (AF-S) is selected with the camera. Autofocus 1 Set the camera to AF (autofocus). 2 Slide the lens A-M mode switch to A. 3 Focus.
❚❚ Aperture Aperture is adjusted using camera controls. Zoom and Maximum Aperture Changes to zoom can alter the maximum aperture by up to 11/3 EV. The camera however automatically takes this into account when setting exposure, and no modifications to camera settings are required following adjustments to zoom. ❚❚ Using the Built-in Flash When using the built-in flash, be sure the subject is at a range of at least 0.
❚❚ Vibration Reduction (VR) Vibration reduction (VR) reduces blur caused by camera shake, allowing shutter speeds up to 4 stops slower than would otherwise be the case (measured at 140 mm with a D300s camera according to Camera and Imaging Products Association [CIPA] standards; effects vary with the photographer and shooting conditions). This increases the range of shutter speeds available and permits hand-held, tripod-free photography in a wide range of situations.
D Using Vibration Reduction: Notes • When using vibration reduction, press the shutter-release button halfway and wait for the image in the viewfinder to stabilize before pressing the shutter-release button the rest of the way down. • When vibration reduction is active, the image in the viewfinder may jiggle after the shutter is released. This does not indicate a malfunction.
❚❚ The Lens Hood The lens hood protects the lens and blocks stray light that would otherwise cause flare or ghosting. Attaching the Hood Align the lens hood mounting mark (●) with the lens hood alignment mark ( ) and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark (—). When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached.
❚❚ Specifications Type Focal length Maximum aperture Lens construction Angle of view Focal length scale Distance information Zoom Focusing Vibration reduction Minimum focus distance Diaphragm blades Diaphragm Aperture range Metering Filter-attachment size Dimensions Weight Type G AF-S DX lens with built-in CPU and F mount 18–140 mm f/3.5–5.
AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II This lens is for use exclusively with DX format Nikon digital camera. The parts of the lens are listed below. 1 Lens hood .....................................342 10 Focus ring .....................................115 2 Lens hood attachment index...342 11 Mounting index............................. 24 3 Lens hood lock mark ..................342 12 Lens mount rubber gasket 4 Lens hood mounting index ......342 13 CPU contacts................................
❚❚ Focus Focus mode is determined by the camera focus mode and the position of the lens focus mode switch. See the camera manual for information on camera focus mode selection. Camera focus mode AF MF Lens focus mode M/A M Autofocus with Manual focus with manual override electronic rangefinder Manual focus with electronic rangefinder M/A (Autofocus with Manual Override) 1 Slide the lens focus-mode switch to M/A. 2 Focus.
❚❚ Zoom and Depth of Field Before focusing, rotate the zoom ring to adjust the focal length and frame the photograph. If the camera offers depth-of-field preview (stop down), depth of field can be previewed in the viewfinder. Note: The lens uses Nikon’s Internal Focusing (IF) system. Unlike other lenses, focal length decreases as the focus distance shortens.
❚❚ Using the Built-in Flash When using the built-in flash, be sure the subject is at a range of at least 0.6 m (2 ft) and remove lens hoods to prevent vignetting (shadows created where the end of the lens obscures the built-in flash).
❚❚ Vibration Reduction (VR) Using the Vibration Reduction ON/OFF Switch • Select ON to enable vibration reduction. Vibration reduction is activated when the shutter-release button is pressed halfway, reducing the effects of camera shake for improved framing and focus. • Select OFF to turn vibration reduction off. Using the Vibration Reduction Mode Switch • Select NORMAL for enhanced vibration reduction when photographing stationary subjects.
D Using Vibration Reduction: Notes • When using vibration reduction, press the shutter-release button halfway and wait for the image in the viewfinder to stabilize before pressing the shutter-release button the rest of the way down. • When vibration reduction is active, the image in the viewfinder may jiggle after the shutter is released. This does not indicate a malfunction. • Slide the vibration reduction mode switch to NORMAL for panning shots.
❚❚ The Lens Hood The lens hood protects the lens and blocks stray light that would otherwise cause flare or ghosting. Attaching the Hood Align the lens hood mounting mark (●) with the lens hood alignment mark ( ) and then rotate the hood (w) until the ● mark is aligned with the lens hood lock mark (—). When attaching or removing the hood, hold it near the symbol on its base and avoid gripping it too tightly. Vignetting may occur if the hood is not correctly attached.
❚❚ Specifications Type G AF-S DX Zoom-NIKKOR lens with built-in CPU and F mount, designed for use with Nikon DX-format digital SLR cameras Focal length 18–200 mm Maximum aperture f/3.5–5.
D Lens Care • Keep the CPU contacts clean. • Should the rubber lens-mount gasket be damaged, cease use immediately and take the lens to a Nikon-authorized service center for repair. • Use a blower to remove dust and lint from the lens surfaces. To remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers.
A A Note on Wide- and Super Wide-Angle Lenses Autofocus may not provide the desired results in situations like those shown below. 1 Objects in the background occupy more of the focus point than the main subject: If the focus point contains both foreground and background objects, the camera may focus on the background and the subject may be out of focus, particularly with wideExample: A far-off portrait and super wide-angle lenses.
Approved Memory Cards The camera supports SD, SDHC, and SDXC memory cards, including SDHC and SDXC cards compliant with UHS-I. Cards rated UHS Speed Class 3 or better are recommended for movie recording; using slower cards may result in recording being interrupted. When choosing cards for use in card readers, be sure they are compatible with the device. Contact the manufacturer for information on features, operation, and limitations on use.
Memory Card Capacity The following table shows the approximate number of pictures that can be stored on a 16 GB SanDisk Extreme Pro 95 MB/s UHS-I SDHC card at different image quality (0 97), image size (0 99), and image area settings (0 93). ❚❚ DX (24×16) Image Area Image quality NEF (RAW), Lossless compressed, 12-bit NEF (RAW), Lossless compressed, 14-bit NEF (RAW), Compressed, 12-bit NEF (RAW), Compressed, 14-bit JPEG fine 3 JPEG normal 3 JPEG basic 3 Image size File size 1 No.
❚❚ 1.3× (18×12) Image Area Image quality NEF (RAW), Lossless compressed, 12-bit NEF (RAW), Lossless compressed, 14-bit NEF (RAW), Compressed, 12-bit NEF (RAW), Compressed, 14-bit Image size File size 1 No. of images 1 Buffer capacity 2 — 13.1 MB 713 100 — 15.6 MB 559 100 — 11.0 MB 949 100 — 13.4 MB 803 100 Large 6.6 MB 1700 100 Medium 4.2 MB 2700 100 JPEG fine 3 Small 2.4 MB 4600 100 Large 3.4 MB 3300 100 Medium 2.2 MB 5100 100 JPEG normal 3 Small 1.3 MB 8600 100 Large 1.8 MB 6200 100 Medium 1.
Battery Life The movie footage or number of shots that can be recorded with fully-charged batteries varies with the condition of the battery, temperature, interval between shots, and the length of time menus are displayed. Sample figures for EN-EL15a (1900 mAh) batteries are given below.
The following can reduce battery life: • Using the monitor • Keeping the shutter-release button pressed halfway • Repeated autofocus operations • Taking NEF (RAW) photographs • Slow shutter speeds • Using camera Wi-Fi (wireless LAN) and Bluetooth features • Using the camera with optional accessories connected • Using VR (vibration reduction) mode with VR lenses • Repeatedly zooming in and out with an AF-P lens.
Index Symbols i (Auto mode).....................................48 j (Auto (flash off) mode).................48 SCENE (Scene mode).............................61 EFFECTS (Special effects)......................64 k (Portrait).............................................62 l (Landscape)......................................62 p (Child).................................................62 m (Sports)...............................................62 n (Close up) ..........................................
A AC adapter.......................................... 287 Accessories ......................................... 287 Active D-Lighting 153, 183, 219, 254, 258 ADL bracketing ........................209, 219 AE & flash bracketing............. 209, 210 AE bracketing ........................... 209, 210 AE lock.................................................. 125 AE-L/AF-L button.........................112, 125 AF..................................................100–114 AF activation.........................
Connector for external microphone . 2 Continuous high speed ....................86 Continuous low speed ......................86 Continuous release mode................86 Continuous-servo AF ...................... 100 Control panel.......................................... 8 Copyright ...................................238, 271 CPU contacts...................................... 280 CPU lens........................................ 25, 279 Crop.......................................................
Fn2 button .................................. 266, 267 f-number ...................................... 72, 281 Focal length ....................................... 283 Focal length scale ...................329, 336 Focal plane mark.............................. 116 Focus indicator .................52, 111, 116 Focus lock ........................................... 111 Focus mode........................................ 100 Focus point51, 52, 103, 107, 116, 261 Focus tracking..........................
Lens vibration reduction switch 332, 340 LINK mode .......................................... 271 Live view............................. 49, 179–193 Live view selector...................... 49, 179 Lo ........................................................... 119 Location data............................223, 238 Lock mirror up for cleaning .......... 292 Long exposure NR............................ 255 M M (medium).................................. 99, 192 Manage Picture Control........254, 258 Manual ...
Pop ...........................................................64 Portrait (Set Picture Control)........ 148 Power aperture ................................. 184 Power connector.............................. 287 Predictive focus tracking............... 102 Preset manual (White balance) .. 131, 139 Press the shutter-release button all the way down.....................................53 Press the shutter-release button halfway..................................................52 Programmed auto ...............
Single-point AF ........................103, 109 Single-servo AF ........................100, 101 Size ................................................. 99, 192 Slide show........................................... 251 Slot empty release lock .................. 273 Slow sync....................................160, 162 Slow-motion playback ................... 194 Smart device ................... 224, 251, 272 Speaker ..................................................... 5 Special effects.....................
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. DIGITAL CAMERA User's Manual Printed in Thailand En 6MB38411-02 • Read this manual thoroughly before using the camera. • To ensure proper use of the camera, be sure to read “For Your Safety” (page xii). • After reading this manual, keep it in a readily accessible place for future reference.
DIGITAL CAMERA Menu Guide This manual details menu options and provides information on accessories and connecting the camera to other devices. • Read this manual thoroughly before using the camera. • After reading this manual, keep it in a readily accessible place for future reference.
Table of Contents Menu Guide 9 Defaults .......................................................................................... 9 D The Playback Menu: Managing Images............................ 18 Delete ............................................................................................. 19 Playback Folder........................................................................... 19 Hide Image ...................................................................................
Active D-Lighting....................................................................... Long Exposure NR (Long Exposure Noise Reduction)................................... High ISO NR ................................................................................. Vignette Control ........................................................................ Auto Distortion Control........................................................... Flicker Reduction ......................................................
A Custom Settings: Fine-Tuning Camera Settings.............. 81 Reset Custom Settings ............................................................. 84 a: Autofocus.......................................................................................84 a1: AF-C Priority Selection....................................................... 84 a2: AF-S Priority Selection ....................................................... 85 a3: Focus Tracking with Lock-On..........................................
d4: Electronic Front-Curtain Shutter................................... 99 d5: File Number Sequence ................................................... 100 d6: Viewfinder Grid Display ................................................. 101 d7: ISO Display.......................................................................... 101 d8: LCD Illumination............................................................... 101 d9: Optical VR............................................................................
Information Display................................................................ Auto Info Display..................................................................... Info Display Auto Off.............................................................. AF Fine-Tune............................................................................. Clean Image Sensor................................................................ Lock Mirror up for Cleaning.................................................
N The Retouch Menu: Creating Retouched Copies .......... 157 NEF (RAW) Processing............................................................ 160 Trim............................................................................................... 163 Resize ........................................................................................... 164 D-Lighting .................................................................................. 166 Quick Retouch ...............................................
Optional Flash Units 188 Flash Control Options............................................................. 188 Built-in or Camera-Mounted Flash............................................. 188 Remote Flash Photography.......................................................... 189 Optical AWL .............................................................................. 190 Built-in Flash/SB-500 ....................................................................... 190 Other Flash Units...................
Menu Guide Defaults The default settings for the options in the camera menus are listed below.
❚❚ Photo Shooting Menu Defaults Option Storage folder (0 27) Rename Select folder by number File naming (0 31) Flash control (0 32) Flash control mode (built-in)/Flash control mode (external) Wireless flash options Choose image area (0 35) Image quality (0 36) Image size (0 37) NEF (RAW) recording (0 37) NEF (RAW) compression NEF (RAW) bit depth ISO sensitivity settings (0 38) ISO sensitivity Auto ISO sensitivity control White balance (0 39) Fine-tuning Choose color temp.
Option Default Auto distortion control (0 46) Off Flicker reduction (0 47) Flicker reduction setting Disable Flicker reduction indicator On Remote control mode (ML-L3) (0 49) Off Auto bracketing set (0 49) AE & flash bracketing Multiple exposure (0 50) * Multiple exposure mode Off Number of shots 2 Overlay mode Average Keep all exposures On HDR (high dynamic range) (0 57) HDR mode Off HDR strength Auto Interval timer shooting (0 58) Off Start options Now Interval 1 minute No.
❚❚ Movie Shooting Menu Defaults Option File naming (0 67) Choose image area (0 67) Frame size/frame rate (0 68) Movie quality (0 68) Movie file type (0 68) ISO sensitivity settings (0 69) Maximum sensitivity Auto ISO control (mode M) ISO sensitivity (mode M) White balance (0 70) Fine-tuning Choose color temp.
❚❚ Custom Settings Menu Defaults a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 b1 b2 b3 b4 b5 b6 c1 c2 c3 Option AF-C priority selection (0 84) AF-S priority selection (0 85) Focus tracking with lock-on (0 86) Number of focus points (0 86) Store points by orientation (0 87) AF activation (0 88) Focus point wrap-around (0 89) Focus point options (0 90) Focus point illumination Manual focus mode Built-in AF-assist illuminator (0 91) Manual focus ring in AF mode (0 92) ISO sensitivity step value (0 93) EV steps for exposu
Option c4 Monitor off delay (0 97) Playback Menus Information display Image review Live view c5 Remote on duration (ML-L3) (0 97) d1 CL mode shooting speed (0 98) d2 Max. continuous release (0 98) d3 Exposure delay mode (0 98) d4 Electronic front-curtain shutter (0 99) d5 File number sequence (0 100) d6 Viewfinder grid display (0 101) d7 ISO display (0 101) d8 LCD illumination (0 101) d9 Optical VR (0 101) e1 Flash sync speed (0 102) e2 Flash shutter speed (0 104) e3 Exposure comp.
Option f1 Custom control assignment (0 106) Fn1 button Fn1 button + y Fn2 button Fn2 button + y AE-L/AF-L button AE-L/AF-L button + y BKT button + y Movie record button + y f2 OK button (0 114) Shooting mode Playback mode Live view f3 Customize command dials (0 115) Reverse rotation Change main/sub Menus and playback Sub-dial frame advance f4 Release button to use dial (0 117) f5 Reverse indicators (0 117) g1 Custom control assignment (0 118) Fn1 button Fn2 button AE-L/AF-L button Shutter-release button De
❚❚ Setup Menu Defaults Option Save user settings (0 123) Save to U1 Save to U2 Time zone and date (0 126) Sync with smart device Daylight saving time Monitor brightness (0 127) Menus/playback Live view Monitor color balance (0 127) Information display (0 129) Auto info display (0 129) Info display auto off (0 130) AF fine-tune (0 130) AF fine-tune (On/Off) Clean image sensor (0 134) Clean at startup/shutdown Beep options (0 142) Beep on/off Volume Pitch Touch controls (0 143) Enable/disable touch controls F
Option HDMI (0 143) Output resolution Advanced Output range Output display size Live view on-screen display Dual monitor Location data (0 144) Download from smart device External GPS device options Standby timer Set clock from satellite Wireless remote (WR) options (0 145) LED lamp Link mode Assign remote (WR) Fn button (0 147) Airplane mode (0 147) Send to smart device (auto) (0 149) Bluetooth (0 150) Network connection Send while off Eye-Fi upload (0 151) Slot empty release lock (0 153) Default Auto Auto
D The Playback Menu: Managing Images To display the playback menu, press G and select the K (playback menu) tab. G button Option Delete Playback folder Hide image Playback display options Image review After delete 0 19 19 20 22 22 22 Option Auto image rotation Rotate tall Slide show Rating Select to send to smart device A See Also For menu defaults, see “Playback Menu Defaults” (0 9).
Delete G button ➜ D playback menu Delete multiple images. Option Description Q Selected Delete selected pictures. Select n date Delete all pictures taken on a selected date. R All Delete all pictures in the folder currently selected for playback. Playback Folder G button ➜ D playback menu Choose a folder for playback. Option Description Pictures in all folders created with the D7500 will be visible during playback.
Hide Image G button ➜ D playback menu Hide or reveal pictures. Hidden pictures are visible only in the Hide image menu and can only be deleted by formatting the memory card. Option Select/set Select date Deselect all Description Hide or reveal selected pictures. Selecting this option displays a list of dates. To hide all pictures taken on a date, highlight the date and press 2. Selected dates are marked by a L; to reveal all pictures taken on a selected date, highlight it and press 2.
2 Select pictures. Use the multi selector to scroll through the pictures on the memory card (to view the highlighted picture full screen, press and hold the X/T button) and press W (Z) to select the current picture. Selected pictures are W (Z) button marked by a R icon; to deselect a picture, highlight it and press W (Z) again. Continue until all the desired pictures have been selected. 3 Press J. Press J to complete the operation.
Playback Display Options G button ➜ D playback menu Choose the information available in the playback photo information display. Press 1 or 3 to highlight an option, then press 2 to select the option for the photo information display. A L appears next to selected items; to deselect, highlight an item and press 2. To return to the playback menu, press J. Image Review G button ➜ D playback menu Choose whether pictures are automatically displayed in the monitor immediately after shooting.
Auto Image Rotation G button ➜ D playback menu Photographs taken while On is selected contain information on camera orientation, allowing them to be rotated automatically during playback or when viewed in ViewNX-i or in Capture NX-D. The following orientations are recorded: Landscape (wide) orientation Camera rotated 90° clockwise Camera rotated 90° counter-clockwise Camera orientation is not recorded when Off is selected.
Slide Show G button ➜ D playback menu Create a slide show of the pictures in the current playback folder (0 19). Hidden images (0 20) are not displayed. Option Start Description Start slide show. Choose type of image displayed from Still images and Image type movies, Still images only, and Movies only. Frame interval Choose how long each picture will be displayed. To start the slide show, highlight Start and press J.
A dialog is displayed when the show ends. Select Restart to restart or Exit to return to the playback menu. Rating G button ➜ D playback menu Highlight pictures using the multi selector and press and hold the W (Z) while pressing 1 or 3 to choose ratings of from zero to five stars, or select ) to mark the picture as a candidate for later deletion. To view the highlighted picture full frame, press and hold the X (T). Press J to put your selection into effect.
C The Photo Shooting Menu: Shooting Options To display the photo shooting menu, press G and select the C (photo shooting menu) tab.
Reset Photo Shooting Menu G button ➜ C photo shooting menu Select Yes to restore photo shooting menu options to their default values (0 10). Storage Folder G button ➜ C photo shooting menu Rename folders and select the folder in which subsequent images will be stored. Folder Folder number Folder name ❚❚ Rename Folders are identified by a 5-character folder name preceded by a 3-digit folder number assigned automatically by the camera.
A Text Entry A dialog is displayed when text entry is Text display area required. Tap the letters on the touch-screen keyboard. You can also use the multi selector to highlight the desired character in the keyboard area and press J to insert the highlighted character at the current cursor position (note that if a character is entered when the field is full, the last character in the field will be deleted). To delete the character under the cursor, press the O (Q) button.
❚❚ Select Folder by Number To select folders by number or create a new folder with the current folder name and a new folder number: 1 Choose Select folder by number. Highlight Select folder by number and press 2. 2 Choose a folder number. Press 4 or 2 to highlight a digit, press 1 or 3 to change. If a folder with the selected number already exists, a W, X, or Y icon will be displayed to the left of the folder number: • W: Folder is empty. • X: Folder is partially full.
❚❚ Select Folder from List To choose from a list of existing folders: 1 Choose Select folder from list. Highlight Select folder from list and press 2. 2 Highlight a folder. Press 1 or 3 to highlight a folder. 3 Select the highlighted folder. Press J to select the highlighted folder and return to the main menu. Subsequent photographs will be stored in the selected folder.
File Naming G button ➜ C photo shooting menu Photographs are saved using file names consisting of “DSC_” or, in the case of images that use the Adobe RGB color space (0 44), “_DSC”, followed by a four-digit number and a three-letter extension (e.g., “DSC_0001.JPG”). The File naming option is used to select three letters to replace the “DSC” portion of the file name. A Extensions The following extensions are used: “.NEF” for NEF (RAW) images, “.JPG” for JPEG images, “.MOV” for MOV movies, “.
Flash Control G button ➜ C photo shooting menu Choose the flash control mode for the built-in flash and for optional flash units mounted on the camera accessory shoe and adjust settings for off-camera flash photography. For more information on using optional flash units, see “Optional Flash Units” (0 188). ❚❚ Flash Control Mode (Built-in) The flash control mode for the built-in flash can be selected using the Flash control > Flash control mode (built-in) option in the photo shooting menu.
A “Times“ The options available for Repeating Flash > Times are determined by flash output.
❚❚ Wireless Flash Options Adjust settings for simultaneous wireless control of multiple remote flash units. When an option other than Off is selected, Group flash options can be used to choose the flash mode and flash level for the flash units in each group. Option Description The remote flash units are controlled using low-intensity flashes emitted by the master flash. Available only when Optical AWL the built-in flash is raised or with an SB-500 mounted on the camera accessory shoe.
Choose Image Area G button ➜ C photo shooting menu Choose an image area from DX (24×16) and 1.3× (18×12). Option a DX (24×16) Z 1.3× (18×12) Description Pictures are recorded using a 23.5 × 15.7 mm image area (DX format). Pictures are recorded using a 18.0 × 12.0 mm image area, producing a telephoto effect without the need to change lenses.
Image Quality G button ➜ C photo shooting menu Choose a file format and compression ratio (image quality). Option File type NEF (RAW) NEF NEF (RAW)+ JPEG fine★/ NEF (RAW)+ JPEG fine NEF (RAW)+ JPEG normal★/ NEF (RAW)+ JPEG normal NEF (RAW)+ JPEG basic★/ NEF (RAW)+ JPEG basic JPEG fine★/ JPEG fine JPEG normal★/ JPEG normal JPEG basic★/ JPEG basic Description RAW data from the image sensor are saved without additional processing.
Image Size G button ➜ C photo shooting menu Image size is measured in pixels. Choose from # Large, $ Medium, or % Small (note that image size varies depending on the option selected for Choose image area): Option Size (pixels) Print size (cm/in.) * Large 5568 × 3712 47.1 × 31.4/18.6 × 12.4 DX (24×16) Medium 4176 × 2784 35.4 × 23.6/13.9 × 9.3 Small 2784 × 1856 23.6 × 15.7/ 9.3 × 6.2 Large 4272 × 2848 36.2 × 24.1/14.2 × 9.5 1.3× (18×12) Medium 3200 × 2136 27.1 × 18.1/10.7 × 7.1 Small 2128 × 1424 18.0 × 12.
❚❚ NEF (RAW) Bit Depth Option q 12-bit r 14-bit Description NEF (RAW) images are recorded at a bit-depth of 12 bits. NEF (RAW) images are recorded at a bit depth of 14 bits, producing files larger than those with a bit depth of 12 bits but increasing the color data recorded. ISO Sensitivity Settings G button ➜ C photo shooting menu Adjust ISO sensitivity settings for photographs. Option Description Adjust ISO sensitivity. Select from values between ISO 100 and 51200. Settings of from about 0.
White Balance G button ➜ C photo shooting menu Match white balance to the light source. Option Description White balance is adjusted automatically. For best results, use type G, E or D lens. If Normal built-in or optional flash fires, results are Keep warm lighting colors adjusted appropriately. Incandescent Use under incandescent lighting. v Auto J I Fluorescent Warm-white fluorescent Use with: • Sodium-vapor lighting (found in sports venues). • Warm-white fluorescent lights.
Set Picture Control G button ➜ C photo shooting menu Choose how new photos will be processed. Select according to the type of scene or your creative intent. Option n Auto Q Standard R Neutral S Vivid T Monochrome e Portrait f Landscape q Flat 40 Menu Guide Description The camera automatically adjusts hues and tones based on the Standard Picture Control.
Manage Picture Control G button ➜ C photo shooting menu Create custom Picture Controls. Option Save/edit Rename Delete Load/save Description Create a new custom Picture Control based on an existing preset or custom Picture Control, or edit existing custom Picture Controls (0 41). Rename a selected Picture Control. Delete a selected Picture Control. Use the following options to copy custom Picture Controls to and from memory cards.
2 Select a Picture Control. Highlight an existing Picture Control and press 2, or press J to proceed to Step 4 to save a copy of the highlighted Picture Control without further modification. 3 Edit the selected Picture Control. To abandon any changes and start over from default settings, press the O (Q) button. Press J when settings are complete. 4 Select a destination. Choose a destination for the custom Picture Control (C-1 through C-9) and press 2.
5 Name the Picture Control. A text-entry dialog will be displayed. By default, new Picture Controls are named by adding a two-digit number (assigned automatically) to the name of the existing Picture Control; to choose a different name, rename the Picture Control as described in “Text Entry” (0 28). Tap the keyboard selection button to cycle through the upper-case, lower-case, and symbol keyboards. Custom Picture Control names can be up to nineteen characters long.
Color Space G button ➜ C photo shooting menu The color space determines the gamut of colors available for color reproduction. sRGB is recommended for general-purpose printing and display, Adobe RGB, with its broader gamut of colors, for professional publication and commercial printing. A Adobe RGB For accurate color reproduction, Adobe RGB images require applications, displays, and printers that support color management.
Long Exposure NR (Long Exposure Noise Reduction) G button ➜ C photo shooting menu If On is selected, photographs taken at shutter speeds slower than 1 s will be processed to reduce noise (bright spots or fog). The time required for processing roughly doubles; during processing, “l m” will flash in the shutter speed/aperture displays and pictures can not be taken (if the camera is turned off before processing is complete, the picture will be saved but noise reduction will not be performed).
Vignette Control G button ➜ C photo shooting menu “Vignetting” is a drop in brightness at the edges of a photograph. Vignette control reduces vignetting for type G, E, and D lenses (PC lenses excluded). Its effects vary from lens to lens and are most noticeable at maximum aperture. Choose from High, Normal, Low, and Off.
Flicker Reduction G button ➜ C photo shooting menu Reduce banding or (in photographs taken in continuous release modes) uneven exposure or coloration caused by the flicker of such light sources as fluorescent or mercury-vapor lamps during viewfinder photography. Option Description When Enable is selected, the camera will time Flicker reduction photographs to reduce the effects of flicker. Note that setting the frame rate may drop while flicker reduction is in effect.
A Flicker Reduction in the Photo Shooting Menu Take a test shot and view the results before taking additional photographs. Flicker reduction can detect flicker at 100 and 120 Hz (associated respectively with AC power supplies of 50 and 60 Hz). Flicker may not be detected or the desired results may not be achieved with dark backgrounds, bright light sources, or decorative lighting displays and other non-standard lighting.
Remote Control Mode (ML-L3) G button ➜ C photo shooting menu Choose how the camera behaves when used with an optional ML-L3 remote control (0 222). Option % $ & 7 Description Shutter is released 2 s after ML-L3 shutter-release Delayed remote button is pressed. Quick-response Shutter is released when ML-L3 shutter-release remote button is pressed. Press ML-L3 shutter-release button once to raise Remote mirror, again to release shutter and take mirror-up photograph.
Multiple Exposure G button ➜ C photo shooting menu Record two to ten NEF (RAW) exposures as a single photograph. Option Description • 6 On (series): Take a series of multiple exposures. Select Off to resume normal shooting. Multiple • On (single photo): Take one multiple exposure. exposure mode • Off: Exit without creating additional multiple exposures. Choose the number of exposures that will be combined Number of shots to form a single photograph.
❚❚ Creating a Multiple Exposure Multiple exposures can not be recorded in live view. Exit live view before proceeding. A Extended Recording Times If the monitor turns off during playback or menu operations and no operations are performed for about 30 s, shooting will end and a multiple exposure will be created from the exposures that have been recorded to that point. The time available to record the next exposure can be extended by choosing longer times for Custom Setting c2 (Standby timer, 0 96).
3 Choose the number of shots. Highlight Number of shots and press 2. Press 1 or 3 to choose the number of exposures that will be combined to form a single photograph and press J. A The BKT Button If Multiple exposure is selected for Custom Setting f1 (Custom control assignment) > BKT button + y (0 106), you can select the multiple exposure mode by pressing the BKT button and rotating the main command dial and the number of shots by pressing the BKT button and rotating the sub-command dial.
6 Frame a photograph, focus, and shoot. In continuous release modes, the camera records all exposures in a single burst. If On (series) is selected, the camera will continue to record multiple exposures while the shutter-release button is pressed; if On (single photo) is selected, multiple exposure shooting will end after the first photograph.
❚❚ Using the i Button The options listed below can be accessed by pressing the K button during a multiple exposure and then pressing the i button. Use the touch screen or navigate the menu using the multi selector, pressing 1 or 3 to highlight items and pressing J to select. i button • View progress: View a preview created from the exposures recorded to the current point. • Retake last exposure: Retake the most recent exposure.
❚❚ Ending Multiple Exposures To end a multiple exposure before the specified number of exposures have been taken, select Off for multiple exposure mode or press the K button followed by the i button and select either Save and exit or Discard and exit. If shooting ends or you select Save and exit before the specified number of exposures have been taken, a multiple exposure will be created from the exposures that have been recorded to that point.
A Interval Timer Photography If interval timer photography is activated before the first exposure is taken, the camera will record exposures at the selected interval until the number of exposures specified in the multiple exposure menu have been taken (the number of shots listed in the interval timer shooting menu is ignored).
HDR (High Dynamic Range) G button ➜ C photo shooting menu Used with high contrast subjects, High Dynamic Range (HDR) preserves details in highlights and shadows by combining two shots taken at different exposures. Option HDR mode HDR strength Description • 6 On (series): Take a series of HDR photographs. Select Off to resume normal shooting. • On (single photo): Take one HDR photograph. • Off: Exit without taking additional HDR photographs. Choose the HDR strength.
Interval Timer Shooting G button ➜ C photo shooting menu Take photographs at the selected interval until the specified number of shots has been recorded. Select a release mode other than self-timer (E) and mirror up (MUP) when using the interval timer. Option Description Start interval timer shooting, either after 3 s (Now selected for Start options) or at a selected date and Start time (Choose start day and start time). Shooting will continue at the selected interval until all shots have been taken.
❚❚ Interval Timer Photography D Before Shooting Before beginning interval timer photography, take a test shot at current settings and view the results in the monitor. Once settings have been adjusted to your satisfaction, remove the rubber eyecup and cover the viewfinder with the supplied eyepiece cap to prevent light entering via the viewfinder interfering with photographs and exposure.
2 Adjust interval timer settings. Choose a start option, interval, number of shots per interval, and exposure smoothing option. • To choose a start option: Highlight Start options and press 2. Highlight an option and press J. To start shooting immediately, select Now. To start shooting at a chosen date and time, select Choose start day and start time, then choose the date and time and press J. • To choose the interval between shots: Highlight Interval and press 2.
• To choose the number of shots per interval: Highlight No. of intervals × shots/interval and press 2. Choose the number of intervals and the number of shots per interval and press J. In S (single frame) mode, the photographs for each interval will be taken at the rate chosen for Custom Setting d1 (CL mode shooting speed; 0 98). • To enable or disable exposure smoothing: Highlight Exposure smoothing and press 2. Highlight an option and press J.
3 Start shooting. Highlight Start and press J. The first series of shots will be taken at the specified starting time, or after about 3 s if Now was selected for Start options in Step 2. Shooting will continue at the selected interval until all shots have been taken. A During Shooting During interval timer photography, the memory card access lamp will flash.
❚❚ Pausing Interval Timer Photography Interval timer photography can be paused between intervals by pressing J or selecting Pause in the interval timer menu. ❚❚ Resuming Interval Timer Shooting To resume shooting immediately, select Restart. Highlight Restart and press J. To resume shooting at a specified time: For Start options, highlight Choose start day and start time and press 2. Choose a starting date and time and press J. Highlight Restart and press J.
❚❚ No Photograph The camera will skip the current interval if any of the following situations persist for eight seconds or more after the interval was due to start: the photograph or photographs for the previous interval have yet to be taken, the memory card is full, or the camera is unable to focus using single-servo autofocus (AF-S or single-servo autofocus selected for AF-A) or when Focus is selected for Custom Setting a1 (AF-C priority selection) in AF-C (note that the camera focuses again before each s
A Interval Timer Photography Choose an interval longer than the time needed to take the selected number of shots and, if you are using a flash, the time needed for the flash to charge. If the interval is too short, the number of photos taken may be less than the total listed in Step 2 (the number of intervals multiplied by the number of shots per interval) or the flash may fire at less than the power needed for full exposure.
1 The Movie Shooting Menu: Movie Shooting Options To display the movie shooting menu, press G and select the 1 (movie shooting menu) tab.
Reset Movie Shooting Menu G button ➜ 1 movie shooting menu Highlight Yes and press J to restore movie shooting menu options to their default values (0 12). File Naming G button ➜ 1 movie shooting menu Choose the three-letter prefix used in naming the image files in which movies are stored. The default prefix is “DSC” (0 31). Choose Image Area G button ➜ 1 movie shooting menu Choose the image area for movies from DX and 1.3×.
Frame Size/Frame Rate G button ➜ 1 movie shooting menu Choose the movie frame size (in pixels) and frame rate. r s t Maximum bit rate (Mbps) (★ high quality/Normal) Option 1 3840 × 2160 (4K UHD); 30p 2 3840 × 2160 (4K UHD); 144 25p 2 3840 × 2160 (4K UHD); 24p 2 1920 × 1080; 60p 48/24 1920 × 1080; 50p y/y z/z 1/1 1920 × 1080; 30p 2/2 1920 × 1080; 25p 3/3 1920 × 1080; 24p 4/4 1280 × 720; 60p 5/5 1280 × 720; 50p Maximum length 29 min. 59 s 3 24/12 1 Actual frame rate is 29.
Movie File Type G button ➜ 1 movie shooting menu Choose the file format for movies from MOV and MP4. ISO Sensitivity Settings G button ➜ 1 movie shooting menu Adjust the following ISO sensitivity settings. • Maximum sensitivity: Choose the upper limit for auto ISO sensitivity control from values between ISO 200 and Hi 5. Auto ISO sensitivity control is used in modes P, S, and A and when On is selected for Auto ISO control (mode M) in mode M.
White Balance G button ➜ 1 movie shooting menu Choose the white balance for movies (0 39). Select Same as photo settings to use the option currently selected for photos. Set Picture Control G button ➜ 1 movie shooting menu Choose a Picture Control for movies (0 40). Select Same as photo settings to use the option currently selected for photos. Manage Picture Control G button ➜ 1 movie shooting menu Create custom Picture Controls (0 41).
High ISO NR G button ➜ 1 movie shooting menu Reduce “noise” (randomly-spaced bright pixels) in movies recorded at high ISO sensitivities (0 45). Flicker Reduction G button ➜ 1 movie shooting menu Reduce flicker and banding when shooting under fluorescent or mercury-vapor lighting during live view or movie recording. Choose Auto to allow the camera to automatically choose the correct frequency, or manually match the frequency to that of the local AC power supply.
Microphone Sensitivity G button ➜ 1 movie shooting menu Turn the built-in or external microphones (0 224) on or off or adjust microphone sensitivity. Choose Auto sensitivity to adjust sensitivity automatically, Microphone off to turn sound recording off; to select microphone sensitivity manually, select Manual sensitivity and choose a sensitivity. A The 2 Icon 2 is displayed in full-frame and movie playback if the movie was recorded without sound.
Frequency Response G button ➜ 1 movie shooting menu If K Wide range is selected, the built-in and external microphones (0 224) will respond to a wide range of frequencies, from music to the bustling hum of a city street. Choose L Vocal range to bring out human voices.
Time-Lapse Movie G button ➜ 1 movie shooting menu The camera automatically takes photos at selected intervals to create a silent time-lapse movie with the frame size, frame rate, movie quality, and image area currently selected in the movie shooting menu. Time-lapse recording is available in i, j, P, S, A, M, and SCENE modes. Option Description Start time-lapse recording. Shooting starts after about 3 s Start and continues at the selected interval for the selected shooting time.
❚❚ Recording Time-Lapse Movies A Before Shooting Before shooting a time-lapse movie, take a test shot at current settings and view the results in the monitor (time-lapse movies are shot using the movie crop; use live view so that you can check the composition). For consistent coloration, choose a white balance setting other than auto (0 39).
2 Adjust time-lapse movie settings. Choose an interval, total shooting time, and exposure smoothing option. • To choose the interval between frames: Highlight Interval and press 2. Choose an interval longer than the slowest anticipated shutter speed (minutes and seconds) and press J. • To choose the total shooting time: Highlight Shooting time and press 2. 76 Menu Guide Choose shooting time (up to 7 hours 59 minutes) and press J.
• To enable or disable exposure smoothing: Highlight Exposure smoothing and press 2. Highlight an option and press J. 3 Start shooting. Highlight Start and press J. Shooting starts after about 3 s. The camera takes photographs at the selected interval for the selected shooting time. When complete, timelapse movies are recorded to the memory card. A 3840 × 2160 If an option with a frame size 3840 × 2160 is selected for Frame size/ frame rate in the movie shooting menu, the 1.3× DX crop indicator and 1.
❚❚ Ending Shooting To end shooting before all the photos are taken, highlight Off in the time-lapse movie menu and press J, or press J between frames or immediately after a frame is recorded. A movie will be created from the frames shot to the point where shooting ended. Note that shooting will end and no movie will be recorded if the power source is removed or disconnected or the memory card is ejected.
A Calculating the Length of the Final Movie The total number of frames in the final movie can be calculated by dividing the shooting time by the interval and rounding up. The length of the final movie can then be calculated by dividing the number of shots by the frame rate selected for Frame size/frame rate in movie shooting menu (0 68). A 48 frame movie recorded at 1920 × 1080; 24p, for example, will be about two seconds long. The maximum length for time-lapse movies is 20 minutes.
A During Shooting During shooting, the memory card access lamp will light and the time-lapse recording indicator will be displayed in the control panel. The time remaining (in hours and minutes) appears in the shutter-speed display immediately before each frame is recorded. At other times, the time remaining can be viewed by pressing the shutterrelease button halfway. Regardless of the option selected for Custom Setting c2 (Standby timer, 0 96), the standby timer will not expire during shooting.
A Custom Settings: Fine-Tuning Camera Settings To display the Custom Settings menu, press G and select the A (Custom Settings menu) tab. G button Custom Settings are used to customize camera settings to suit individual preferences.
The following Custom Settings are available: a a1 a2 a3 a4 a5 a6 a7 a8 a9 a10 b b1 b2 b3 b4 b5 b6 c c1 c2 c3 c4 c5 Custom Setting Reset custom settings Autofocus AF-C priority selection AF-S priority selection Focus tracking with lock-on Number of focus points Store points by orientation AF activation Focus point wrap-around Focus point options Built-in AF-assist illuminator Manual focus ring in AF mode * Metering/exposure ISO sensitivity step value EV steps for exposure cntrl Easy exposure compensation M
Custom Setting d Shooting/display d1 CL mode shooting speed d2 Max. continuous release d3 Exposure delay mode d4 Electronic front-curtain shutter d5 File number sequence d6 Viewfinder grid display d7 ISO display d8 LCD illumination d9 Optical VR * e Bracketing/flash e1 Flash sync speed e2 Flash shutter speed e3 Exposure comp.
Reset Custom Settings G button ➜ A Custom Settings menu Select Yes to restore Custom Settings to their default values (0 13). a: Autofocus a1: AF-C Priority Selection G button ➜ A Custom Settings menu When AF-C is selected for viewfinder photography, this option controls whether photographs can be taken whenever the shutter-release button is pressed (release priority) or only when the camera is in focus (focus priority).
a2: AF-S Priority Selection G button ➜ A Custom Settings menu When AF-S is selected for viewfinder photography, this option controls whether photographs can be taken only when the camera is in focus (focus priority) or whenever the shutter-release button is pressed (release priority). Option G Release F Focus Description Photos can be taken whenever the shutter-release button is pressed. Photos can only be taken when the in-focus indicator (I) is displayed.
a3: Focus Tracking with Lock-On G button ➜ A Custom Settings menu This option controls how autofocus adjusts to sudden large changes in the distance to the subject when AF-C is selected or continuous-servo autofocus is selected when the camera is in AF-A mode for viewfinder photography. Option C 5 (Long)/ ( 4/ D 3 (Normal)/ ) 2/ E 1 (Short) Off Description When the distance to the subject changes abruptly, the camera waits for the specified period before adjusting the distance to the subject.
a5: Store Points by Orientation G button ➜ A Custom Settings menu Choose whether separate focus points can be selected for “wide” (landscape) orientation, for “tall” (portrait) orientation with the camera rotated 90° clockwise, and for “tall” orientation with the camera rotated 90° counterclockwise. Select Off to use the same focus point regardless of camera orientation.
Choose Yes to enable separate focus-point selection. Camera rotated 90°counter-clockwise Landscape (wide) orientation Camera rotated 90°clockwise a6: AF Activation G button ➜ A Custom Settings menu Choose whether the camera focuses when the shutter-release button is pressed halfway. If AF-ON only is selected, the camera will not focus when the shutter-release button is pressed halfway; focus using a button that has been assigned the AF-ON role in the Custom Settings menu (0 106).
a7: Focus Point Wrap-Around G button ➜ A Custom Settings menu Choose whether focus-point selection “wraps around” from one edge of the viewfinder to another. Option Wrap No wrap Description Focus-point selection “wraps around” from top to bottom, bottom to top, right to left, and left to right, so that, for example, pressing 2 when a focus point at the right edge of the viewfinder display is highlighted (q) selects the corresponding focus point at the left edge of the display (w).
a8: Focus Point Options G button ➜ A Custom Settings menu Choose from the following focus point display options. Option Description Choose whether the active focus point is highlighted in red in the viewfinder. • Auto: The selected focus point is automatically highlighted as needed to establish contrast with the Focus point background. illumination • On: The selected focus point is always highlighted, regardless of the brightness of the background.
a9: Built-in AF-assist Illuminator G button ➜ A Custom Settings menu Choose whether the built-in AF-assist illuminator lights to assist the focus operation when lighting is poor. Option On Off Description The AF-assist illuminator lights when lighting is poor (viewfinder photography only). AF-assist illumination is only available when both of the following conditions are met: 1. AF-S is selected for autofocus mode or single-servo autofocus is selected when the camera is in AF-A mode. 2.
a10: Manual Focus Ring in AF Mode G button ➜ A Custom Settings menu This item is displayed only with lenses that support it. Selecting Enable allows the lens focus ring to be used for manual focus when the camera is in autofocus mode. After pressing the shutter-release button halfway to focus, keep the button pressed halfway and adjust focus using the focus ring. To refocus using autofocus, lift your finger from the shutter-release button and then press it halfway again.
b: Metering/Exposure b1: ISO Sensitivity Step Value G button ➜ A Custom Settings menu Select the increments used when making adjustments to ISO sensitivity. If possible, the current ISO sensitivity setting is maintained when the step value is changed. If the current ISO sensitivity setting is not available at the new step value, ISO sensitivity will be rounded to the nearest available setting.
b3: Easy Exposure Compensation G button ➜ A Custom Settings menu This option controls whether the E button is needed to set exposure compensation. If On (Auto reset) or On is selected, the 0 at the center of the exposure display will flash even when exposure compensation is set to ±0. Option Description Exposure compensation is set by rotating one of the command dials (see note below).
b4: Matrix Metering G button ➜ A Custom Settings menu Choose M Face detection on to enable face detection when shooting portraits with matrix metering during viewfinder photography. b5: Center-Weighted Area G button ➜ A Custom Settings menu Choose the size of the area given the most weight in centerweighted metering. b6: Fine-Tune Optimal Exposure G button ➜ A Custom Settings menu Use this option to fine-tune the exposure value selected by the camera.
c: Timers/AE Lock c1: Shutter-Release Button AE-L G button ➜ A Custom Settings menu Choose whether exposure locks when the shutter-release button is pressed. Option O P Description Pressing the shutter-release button halfway locks On (half press) exposure. Exposure only locks while the shutter-release On (burst mode) button is pressed all the way down. Pressing the shutter-release button does not lock Off exposure.
c3: Self-Timer G button ➜ A Custom Settings menu Choose the length of the shutter release delay, the number of shots taken, and the interval between shots in self-timer mode. • Self-timer delay: Choose the length of the shutter-release delay. • Number of shots: Press 1 and 3 to choose the number of shots taken each time the shutter-release button is pressed. • Interval between shots: Choose the interval between shots when the Number of shots is more than 1.
d: Shooting/Display d1: CL Mode Shooting Speed G button ➜ A Custom Settings menu Choose the maximum frame advance rate in CL (continuous low speed) mode. d2: Max. Continuous Release G button ➜ A Custom Settings menu The maximum number of shots that can be taken in a single burst in continuous mode can be set to any value between 1 and 100.
d4: Electronic Front-Curtain Shutter G button ➜ A Custom Settings menu Select Enable to enable the electronic front-curtain shutter in MUP mode, eliminating blur caused by shutter motion. A mechanical shutter is used in other release modes. A The Electronic Front-Curtain Shutter A type G, E, or D lens is recommended; select Disable if you notice lines or fog when shooting with other lenses.
d5: File Number Sequence G button ➜ A Custom Settings menu When a picture is taken, the camera names the file by adding one to the last file number used. This option controls whether file numbering continues from the last number used when a new folder is created, the memory card is formatted, or a new memory card is inserted in the camera.
d6: Viewfinder Grid Display G button ➜ A Custom Settings menu Choose On to display on-demand grid lines in the viewfinder for reference when composing photographs. d7: ISO Display G button ➜ A Custom Settings menu Choose whether the viewfinder shows ISO sensitivity (Show ISO sensitivity) or the number of exposures remaining (Show frame count).
e: Bracketing/Flash e1: Flash Sync Speed G button ➜ A Custom Settings menu This option controls flash sync speed. Option Description Auto FP high-speed sync is used when a compatible flash unit is attached. If the built-in flash or other flash units are 1/320 s used, shutter speed is set to 1/320 s. When the camera (Auto FP) shows a shutter speed of 1/320 s in mode P or A, auto FP high-speed sync will be activated if the actual shutter speed is faster than 1/320 s.
❚❚ Auto FP High-Speed Sync When 1/320 s (Auto FP) or 1/250 s (Auto FP) is selected for Custom Setting e1 (Flash sync speed, 0 102), the built-in flash can be used at shutter speeds as fast as 1/320 s or 1/250 s, while compatible optional flash units can be used at any shutter speed (Auto FP High-Speed Sync).
e2: Flash Shutter Speed G button ➜ A Custom Settings menu This option determines the slowest shutter speed available when using front- or rear-curtain sync or red-eye reduction in mode P or A (regardless of the setting chosen, shutter speeds can be as slow as 30 s in S and M modes or at flash settings of slow sync, slow rear-curtain sync, or red-eye reduction with slow sync). e3: Exposure Comp.
e4: Auto M ISO Sensitivity Control G button ➜ A Custom Settings menu Choose the reference used to set exposure when a flash is used with auto ISO sensitivity control. Option W X Description The camera takes both the main subject and Subject and background lighting into account when adjusting ISO background sensitivity. ISO sensitivity is adjusted only to ensure that the main Subject only subject is correctly exposed.
f: Controls f1: Custom Control Assignment G button ➜ A Custom Settings menu Choose the functions assigned to camera controls, whether used individually or in combination with the command dials. ❚❚ Press Choose the roles played by the following controls, highlight the desired option and press the J: 2 Fn1 button 5 Fn2 button 4 AE-L/AF-L button A “Press” and “Press + Command Dials” Certain roles can not be assigned simultaneously to both the “press” and “press + command” functions for some controls.
The functions that can be assigned to these controls are as follows: 2/5 ✔ 4 AE/AF lock ✔ ✔ AE lock only ✔ ✔ AE lock (Reset on release) ✔ ✔ AE lock (Hold) ✔ ✔ AF lock only ✔ ✔ AF-ON ✔ ✔ Modeling flash ✔ — Flash off ✔ — Bracketing burst ✔ — + NEF (RAW) ✔ — Matrix metering ✔ — Center-weighted metering ✔ — Spot metering ✔ — Highlight-weighted metering ✔ — Viewfinder grid display ✔ — Viewfinder virtual horizon ✔ — MY MENU ✔ — Access top item in MY MENU ✔ —
The following options are available: Option r B C D E Description Press the control to lock flash value. Press again to FV lock cancel FV lock. Focus and exposure lock while the control is AE/AF lock pressed. AE lock only Exposure locks while the control is pressed. Exposure locks when the control is pressed, and AE lock (Reset remains locked until the control is pressed a on release) second time, the shutter is released, or the standby timer expires.
Option e + NEF (RAW) L M N Matrix metering Centerweighted metering Spot metering Highlight- 4 weighted 9 m n 6 metering Viewfinder grid display Viewfinder virtual horizon MY MENU Access top item in MY MENU K Playback None Description If a JPEG option is currently selected for image quality, “RAW” will be displayed in the control panel and an NEF (RAW) copy will be recorded with the next picture taken after the control is pressed (the original image quality setting will be restored when you remove you
A Virtual Horizon Pressing a control to which Viewfinder virtual horizon has been assigned displays pitch and roll indicators in the viewfinder. Press the control a second time to clear the indicators from display. Roll Camera tilted right Pitch Camera tilted forward Camera level Camera tilted left Camera level Camera tilted back The roles of the pitch and roll indicators are reversed when the camera is rotated to take pictures in “tall” (portrait) orientation.
❚❚ Press + Command Dials To choose the roles played by the following controls in combination with the command dials, highlight the desired option and press the J: 3 ! D n f Fn1 button + y Fn2 button + y AE-L/AF-L button + y BKT button + y Movie record button + y * * Choose the role played by the movie-record button in combination with the command dials when the live view selector is rotated to C.
The following options are available: 5 v y z D I 2 m O Option Description Choose image Press the control and rotate a command dial to area choose an image area. If the control is pressed when the command dials are rotated, changes to shutter speed (modes S 1 step spd/ and M) and aperture (modes A and M) are made in aperture increments of 1 EV, regardless of the option selected for Custom Setting b2 (EV steps for exposure cntrl, 0 93).
A The BKT Button If high dynamic range or multiple exposure is active while another function is assigned to the BKT button, the BKT button can not be used in combination with a command dial until high dynamic range or multiple exposure photography ends.
f2: OK Button G button ➜ A Custom Settings menu This option determines the role assigned to the J button during viewfinder photography, playback, and live view (regardless of the option selected, pressing J when a movie is displayed full frame starts movie playback). ❚❚ Shooting Mode J K Option Select center focus point Highlight active focus point None Role assigned to J button Select the center focus point. Highlight the active focus point.
❚❚ Live View J Option Select center focus point p Zoom on/off None Role assigned to J button Pressing the J button in live view selects the center focus point. Press the J button to toggle zoom on and off. Choose the initial zoom setting from Low magnification (50%), 1 : 1 (100%), and High magnification (200%). The zoom display will center on the active focus point. Pressing the J button has no effect in live view.
Option Description Exposure setting: If Off is selected, the main command dial controls shutter speed and the subcommand dial controls aperture. If On is selected, the main command dial will control aperture and the sub-command Change dial shutter speed. If On (Mode A) is selected, the main main/sub command dial will be used to set aperture in shooting mode A only.
f4: Release Button to Use Dial G button ➜ A Custom Settings menu Selecting Yes allows adjustments that are normally made by holding the E, S (Q), BKT, M (Y), L (U), X (T), W (Z), or AF-mode button and rotating a command dial to be made by rotating the command dial after the button is released. This also applies to controls to which Active D-Lighting, Exposure delay mode, White balance, or Metering has been assigned as a “press + command dial” option for Custom Setting f1 (Custom control assignment, 0 106).
g: Movie g1: Custom Control Assignment G button ➜ A Custom Settings menu Choose the functions assigned to camera controls, whether used individually or in combination with the command dials, when the live view selector is rotated to 1 in live view.
2 5 4 G AE lock (Hold) ✔ ✔ ✔ — AF lock only ✔ ✔ ✔ — AF-ON ✔ ✔ ✔ — Take photos — — — ✔ Record movies — — — ✔ None ✔ ✔ ✔ — Option E F A C 1 The following options are available: Option Power aperture t (open) Power aperture q (close) Exposure i compensation + Exposure h compensation – Description Aperture widens while the Fn1 button is pressed.
Option r Index marking View photo s shooting info B AE/AF lock C AE lock only E AE lock (Hold) F AF lock only A AF-ON C Take photos 1 Record movies None 120 Menu Guide Description Press the control during movie recording to add an index at the current position. Indices can be used when viewing and editing movies. Press the control to display photo shooting data in place of movie recording information. Press again to return to the movie recording display.
A Power Aperture Power aperture is available only in modes A and M and can not be used while photo shooting info is displayed (a 6 icon indicates that power aperture can not be used). The display may flicker while aperture is adjusted. D “Record Movies” When Record movies is selected for Shutter-release button, interval timer photography is not available.
B The Setup Menu: Camera Setup To display the setup menu, press G and select the B (setup menu) tab.
Format Memory Card G button ➜ B setup menu Memory cards must be formatted before first use or after being formatted in other devices. To begin formatting, highlight Yes and press J. Note that formatting permanently deletes all pictures and other data on the card. Before formatting, be sure to make backup copies as required. D During Formatting Do not turn the camera off or remove memory cards during formatting.
2 Adjust settings. Make the desired adjustments to flexible program (mode P), shutter speed (modes S and M), aperture (modes A and M), exposure and flash compensation, flash mode, focus point, metering, autofocus and AF-area modes, bracketing, and settings in the photo shooting, movie shooting, and Custom Settings menus (0 26, 66, 81). 3 Select Save user settings. Press the G button to display the menus. Highlight Save user settings in the setup menu and press 2.
4 Select Save to U1 or Save to U2. Highlight Save to U1 or Save to U2 and press 2. 5 Save user settings. Highlight Save settings and press J to assign the settings selected in Steps 1 and 2 to the mode dial position selected in Step 4. ❚❚ Recalling User Settings Simply rotate the mode dial to Mode dial U1 to recall the settings assigned to Save to U1, or to U2 to recall the settings assigned to Save to U2. Reset User Settings G button ➜ B setup menu To reset settings for U1 or U2 to default values.
Time Zone and Date G button ➜ B setup menu Change time zones, set the camera clock, synchronize the clock with the clock on a smart device, choose the date display order, and turn daylight saving time on or off. Option Description Choose a time zone. The camera clock is automatically set to the time in the new time zone. Date and time Set the camera clock.
Monitor Brightness G button ➜ B setup menu Press 1 or 3 to adjust monitor brightness. Choose higher values for increased brightness, lower values for reduced brightness. Brightness can be adjusted separately for: • Menus/playback: Adjust the brightness of the menu, information, and playback displays. • Live view: Adjust the brightness of the live view display.
Virtual Horizon G button ➜ B setup menu Display roll and pitch information based on information from the camera tilt sensor. If the camera is tilted neither left nor right, the roll reference line will turn green, while if the camera is tilted neither forward nor back, the dot in the center of the display will turn green. Each division is equivalent to 5°.
Information Display G button ➜ B setup menu If Auto (AUTO) is selected, the color of the lettering in the information display will automatically change from black to white or white to black to maintain contrast with the background. To always use the same color lettering, select Manual and choose Dark on light (B; black lettering) or Light on dark (W; white lettering). Monitor brightness will automatically be adjusted for maximum contrast with the selected text color.
Info Display Auto Off G button ➜ B setup menu If On is selected, the eye sensor will turn the information display off when you put your eye to the viewfinder. Selecting Off prevents the display turning off when you look through the viewfinder, but also increases the drain on the battery. AF Fine-Tune G button ➜ B setup menu Fine-tune focus for up to 20 lens types. Use only as required; AF tuning is not recommended in most situations and may interfere with normal focus.
Option List saved values Description List previously saved AF tuning values. To delete a lens from the list, highlight the desired lens and press O (Q). To change a lens identifier (for example, to choose an identifier that is the same as the last two digits of the lens serial number to distinguish it from other lenses of the same type in light of the fact that Saved value can be used with only one lens of each type), highlight the desired lens and press 2.
❚❚ Auto AF Fine-Tuning Auto AF fine-tuning is performed as described below. 1 Ready the camera. Mount the camera on a tripod and aim the camera at a flat, high-contrast subject parallel to the camera focal plane. Note that auto AF fine-tuning works best at maximum aperture and may not function in dark surroundings. 2 Start live view. Rotate the live view selector to C and press the a button. 3 Adjust focus settings.
4 Select the center focus point. Press J to select the center focus point. 5 Focus. Press the shutter-release button halfway to focus, then zoom in on the view through the lens to confirm that the subject is in focus. Focus can be adjusted manually if necessary. 6 Perform auto AF fine-tuning. Press the AF-mode and movie-record buttons simultaneously and keep them pressed until the dialog shown in Step 7 is displayed (this should take slightly over two seconds).
8 Enable AF fine-tuning. In the camera setup menu, select AF fine-tune > AF fine-tune (On/Off), then highlight On and press J. Clean Image Sensor G button ➜ B setup menu Dirt or dust entering the camera when lenses are exchanged or the body cap is removed may adhere to the image sensor and affect your photographs. The Clean image sensor option vibrates the sensor to remove dust. Option Clean now Description Perform image sensor cleaning immediately.
Lock Mirror up for Cleaning G button ➜ B setup menu Use this option to lock the mirror up so that dust that can not be removed using Clean image sensor can be removed manually. Note, however, that because the image sensor is easily damaged, we recommend that manual cleaning be performed only by a Nikon-authorized service representative. ❚❚ Manual Cleaning The sensor can be cleaned manually as described below. 1 Charge the battery or connect an AC adapter.
4 Press J. A message will be displayed in the monitor and a row of dashes will appear in the control panel and viewfinder. To restore normal operation without inspecting the image sensor, turn the camera off. 5 Raise the mirror. Press the shutter-release button all the way down. The mirror will be raised and the shutter curtain will open, revealing the image sensor. The display in the viewfinder will turn off and the row of dashes in the control panel will flash. 6 Examine the image sensor.
7 Clean the sensor. Remove any dust and lint from the sensor with a blower. Do not use a blower-brush, as the bristles could damage the sensor. Dirt that can not be removed with a blower can only be removed by Nikon-authorized service personnel. Under no circumstances should you touch or wipe the sensor. 8 Turn the camera off. The mirror will return to the down position and the shutter curtain will close. Replace the lens or body cap.
Image Dust Off Ref Photo G button ➜ B setup menu Acquire reference data for the Image Dust Off option in Capture NX-D (for more information, refer to Capture NX-D online help). Image Dust Off ref photo is available only when a CPU lens is mounted on the camera. A lens with a focal length of at least 50 mm is recommended. When using a zoom lens, zoom all the way in. 1 Choose a start option. Highlight one of the following options and press J. To exit without acquiring image dust off data, press G.
2 Frame a featureless white object in the viewfinder. With the lens about ten centimeters (four inches) from a welllit, featureless white object, frame the object so that it fills the viewfinder and then press the shutter-release button halfway. In autofocus mode, focus will automatically be set to infinity; in manual focus mode, set focus to infinity manually. 3 Acquire dust off reference data. Press the shutter-release button the rest of the way down to acquire Image Dust Off reference data.
Image Comment G button ➜ B setup menu Add a comment to new photographs as they are taken. Comments can be viewed as metadata in ViewNX-i or Capture NX-D. The comment is also visible on the shooting data page in the photo information display. The following options are available: • Input comment: Input a comment as described in “Text Entry” (0 28). Comments can be up to 36 characters long. • Attach comment: Select this option to attach the comment to all subsequent photographs.
Copyright Information G button ➜ B setup menu Add copyright information to new photographs as they are taken. Copyright information is included in the shooting data shown in the photo information display and can be viewed as metadata in ViewNX-i or in Capture NX-D. The following options are available: • Artist: Enter a photographer name as described in “Text Entry” (0 28). Photographer names can be up to 36 characters long.
Beep Options G button ➜ B setup menu Choose the pitch and volume of the beep that sounds when the camera focuses using single-servo AF (AF-S or when single-servo AF is selected for AF-A), when focus locks during live view photography, while the release timer is counting down in selftimer and delayed remote release modes (0 49), when a photograph is taken in quick-response remote or remote mirrorup mode (0 49), if the shutter-release button is pressed when a write-protected memory card is inserted, or when
Touch Controls G button ➜ B setup menu Adjust monitor touch control settings. ❚❚ Enable/Disable Touch Controls Select Disable to prevent accidental use of touch-screen controls, or Playback only to enable touch-screen controls in playback mode only. ❚❚ Full-Frame Playback Flicks Choose the gesture used to display the next image in full-frame playback: a flick from right to left or a flick from left to right.
Location Data G button ➜ B setup menu Adjust location data settings for use when the camera is connected to a GPS or smart device. Option Description Select Yes to download location data from the smart device and embed them in pictures taken over the next Download two hours. If the camera is connected to both a smart from smart device and a GPS unit, location data will be downloaded device from the GPS unit. Location data can not be acquired if the camera is off or the standby timer has expired.
Wireless Remote (WR) Options G button ➜ B setup menu Adjust settings for optional WR-R10 wireless remote controllers and for optional radio-controlled flash units that support Advanced Wireless Lighting. ❚❚ LED Lamp Enable or disable the status LEDs on a WR-R10 wireless remote controller mounted on the camera. For more information, see the documentation supplied with the wireless remote controller.
❚❚ Link Mode Choose a link mode for WR-R10 wireless remote controllers mounted on other cameras or radio-controlled flash units that support Advanced Wireless lighting. Be sure that the same mode is selected for the other devices. Option Pairing PIN Description To pair the camera with a WR-R10, mount the WR-R10 on the camera and press the pairing button. Connect by entering the device PIN code. Press 4 or 2 to highlight digits and press 1 or 3 to change, then press J to enter and display the selected PIN.
Assign Remote (WR) Fn Button G button ➜ B setup menu Choose the role played by the Fn button on optional wireless remote controllers equipped with an Fn button. See Custom Setting f1 (Custom control assignment, 0 106) for more information.
Connect to Smart Device G button ➜ B setup menu Adjust settings for connection to smart devices. Option Start Password protection Description Follow on-screen instructions to connect to the smart device. Choose a password for smart device connections and turn password protection on or off. For information on typing passwords, see “Text Entry” (0 28).
Send to Smart Device (Auto) G button ➜ B setup menu If On is selected, new photos will automatically be uploaded to the smart device (if the camera is not currently connected to the smart device, the photos will be marked for upload and uploaded the next time a wireless connection is established). Movies are not uploaded. If you select Off when images are selected for upload, a confirmation dialog will be displayed; to remove upload marking from all images, highlight Yes and press J.
Bluetooth G button ➜ B setup menu List paired devices and adjust settings for connection to smart devices. Option Network connection Paired devices Send while off 150 Menu Guide Description Enable or disable Bluetooth. View paired devices. Select Off to suspend wireless transmissions when the camera is turned off or the standby timer expires.
Eye-Fi Upload G button ➜ B setup menu This option is displayed only when an Eye-Fi memory card (available separately from third-party suppliers) is inserted in the camera. Choose Enable to upload photographs to a preselected destination. Note that pictures will not be uploaded if signal strength is insufficient. Before uploading pictures via Eye-Fi, select Disable for Airplane mode (0 147) and Bluetooth > Network connection (0 150).
When an Eye-Fi card is inserted, its status is indicated by an icon in the information display: • d: Eye-Fi upload disabled. • e: Eye-Fi upload enabled but no pictures available for upload. • f (static): Eye-Fi upload enabled; waiting to begin upload. • f (animated): Eye-Fi upload enabled; uploading data. • g: Error — camera can not control Eye-Fi card.
Battery Info G button ➜ B setup menu View information on the battery currently inserted in the camera. Item Charge Description The current battery level expressed as a percentage. The number of times the shutter has been released with the current battery since the battery was last charged. Note No. of shots that the camera may sometimes release the shutter without recording a photograph, for example when measuring preset white balance. A five-level display showing battery age.
Save/Load Settings G button ➜ B setup menu Select Save settings to save the following settings to the memory card (if the card is full, an error will be displayed). Use this option to share settings among D7500 cameras.
Menu Option File naming Choose image area Frame size/frame rate Movie quality Movie file type ISO sensitivity settings White balance (with fine-tuning and presets d-1–d-6) Set Picture Control (Custom Picture Controls are Movie shooting saved as Auto) Active D-Lighting High ISO NR Flicker reduction Microphone sensitivity Frequency response Wind noise reduction Electronic VR Custom settings All Custom Settings Language Time zone and date (excepting Date and time and Sync with smart device) Information displa
Menu Option Wireless remote (WR) options Assign remote (WR) Fn button Setup Eye-Fi upload Slot empty release lock All My Menu items My Menu/ All recent settings Recent Settings Choose tab Settings saved using the D7500 can be restored by selecting Load settings. Note that Save/load settings is only available when a memory card is inserted in the camera, and that the Load settings option is only available if the card contains saved settings.
N The Retouch Menu: Creating Retouched Copies To display the retouch menu, press G and select the N (retouch menu) tab. G button The options in the retouch menu are used to create trimmed or retouched copies of existing pictures. The retouch menu is only displayed when a memory card containing photographs is inserted in the camera.
Creating Retouched Copies To create a retouched copy: 1 Select an item in the retouch menu. Press 1 or 3 to highlight an item, 2 to select. 2 Select a picture. Highlight a picture and press J. To view the highlighted picture full screen, press and hold the X (T) button. A Retouch In the case of images recorded at image quality settings of NEF + JPEG, only the NEF (RAW) image will be retouched. The camera may not be able to display or retouch images created with other devices.
3 Select retouch options. For more information, see the section for the selected item. To exit without creating a retouched copy, press G. A Monitor off Delay The monitor will turn off and the operation will be cancelled if no actions are performed for a brief period. Any unsaved changes will be lost. To increase the time the monitor remains on, choose a longer menu display time for Custom Setting c4 (Monitor off delay, 0 97). 4 Create a retouched copy. Press J to create a retouched copy.
NEF (RAW) Processing G button ➜ N retouch menu Create JPEG copies of NEF (RAW) photographs. If pressed the G button to display the retouch menu, you can use this option to copy multiple images. 1 Select NEF (RAW) processing. Highlight NEF (RAW) processing in the retouch menu and press 2. 2 Choose how images are selected. Choose from the following options: • Select image(s): Select one or more images manually. • Select date: Create JPEG copies of all the NEF (RAW) images taken on selected dates.
3 Select photographs. If you chose Select image(s) in Step 2, a picture selection dialog will be displayed listing only NEF (RAW) images created with this camera. Highlight images using the multi selector and press W (Z) to select or deselect; selected images are indicated by a L icon. To view the highlighted image full screen, press and hold the X (T) button. Press J to proceed to Step 4 when your selection is complete. If you chose Select date in Step 2, a list of dates will be displayed.
4 Choose settings for the JPEG copies. Adjust the settings listed below, or select Original to use the setting in effect when the photograph was taken (the original settings are listed below the preview). Note that white balance and vignette control are not available with multiple exposures or pictures created with image overlay and that exposure compensation can only be set to values between –2 and +2 EV.
Trim G button ➜ N retouch menu Create a cropped copy of the selected photograph. The selected photograph is displayed with the selected crop shown in yellow; create a cropped copy as described below. To Reduce size of crop Increase size of crop Change crop aspect ratio Position crop Create copy Description Press W (Z) to reduce the size of the crop. Press X (T) to increase the size of the crop. Rotate the main command dial to choose the aspect ratio. Use multi selector to position the crop.
Resize G button ➜ N retouch menu Create small copies of selected photographs. 1 Select Resize. To resize selected images, highlight Resize in the retouch menu and press 2. 2 Choose a size. Highlight Choose size and press 2. Resize options will be displayed; highlight an option and press J.
3 Choose pictures. Highlight Select image(s) and press 2. Highlight pictures and press the W (Z) button to select or deselect (to view the highlighted picture full screen, press and hold the X/T button). Selected pictures are marked by a 8 icon. Press J when the selection is complete. 4 Save the resized copies. A confirmation dialog will be displayed. Highlight Yes and press J to save the resized copies. A Viewing Resized Copies Playback zoom may not be available when resized copies are displayed.
D-Lighting G button ➜ N retouch menu D-Lighting brightens shadows, making it ideal for dark or backlit photographs. Before After Press 4 or 2 to choose the amount of correction performed. The effect can be previewed in the edit display. Press J to save the retouched copy. Quick Retouch G button ➜ N retouch menu Create copies with enhanced saturation and contrast. D-Lighting is applied as required to brighten dark or backlit subjects. Press 4 or 2 to choose the amount of enhancement.
Red-Eye Correction G button ➜ N retouch menu This option is used to correct “red-eye” caused by the flash, and is available only with photographs taken using the flash. The photograph selected for red-eye correction can be previewed in the edit display. Confirm the effects of red-eye correction and press J to create a copy.
Distortion Control G button ➜ N retouch menu Create copies with reduced peripheral distortion. Select Auto to let the camera correct distortion automatically and then make fine adjustments using the multi selector, or select Manual to reduce distortion manually. Note that Auto is not available with photos taken using auto distortion control; see “Auto Distortion Control” (0 46).
Perspective Control G button ➜ N retouch menu Create copies that reduce the effects of perspective taken from the base of a tall object. Use the multi selector to adjust perspective (note that greater amounts of perspective control result in more of the edges being cropped out). The results can be previewed in the edit display. Press J to save the retouched copy. Before After Fisheye G button ➜ N retouch menu Create copies that appear to have been taken with a fisheye lens.
Filter Effects G button ➜ N retouch menu After adjusting filter effects as described below, press J to copy the photograph. Option Skylight Warm filter Cross screen Soft 170 Menu Guide Description Creates the effect of a skylight filter, making the picture less blue. Creates a copy with warm tone filter effects, giving the copy a “warm” red cast. Add starburst effects to light sources. • Number of points: Choose from four, six, or eight.
Monochrome G button ➜ N retouch menu Copy photographs in Black-and-white, Sepia, or Cyanotype (blue and white monochrome). Selecting Sepia or Cyanotype displays a preview of the selected image; press 1 to increase color saturation, 3 to decrease. Press J to create a monochrome copy.
Image Overlay G button ➜ N retouch menu Image overlay combines two existing NEF (RAW) photographs to create a single picture that is saved separately from the originals; the results, which make use of RAW data from the camera image sensor, are noticeably better than photographs combined in an imaging application. The new picture is saved at current image quality and size settings; before creating an overlay, set image quality and size (0 36, 37; all options are available).
2 Select the first image. Use the multi selector to highlight the first photograph in the overlay. To view the highlighted photograph full frame, press and hold the X (T) button. Press J to select the highlighted photograph and return to the preview display. 3 Select the second image. The selected image will appear as Image 1. Highlight Image 2 and press J, then select the second photo as described in Step 2. 4 Adjust gain.
5 Preview the overlay. To preview the composition, press 4 or 2 to place the cursor in the Preview column, then press 1 or 3 to highlight Overlay and press J (note that colors and brightness in the preview may differ from the final image). To save the overlay without displaying a preview, select Save. To return to Step 4 and select new photos or adjust gain, press W (Z). 6 Save the overlay. Press J while the preview is displayed to save the overlay.
Color Outline G button ➜ N retouch menu Create an outline copy of a photograph to use as a base for painting. Press J to save the retouched copy. Before After Photo Illustration G button ➜ N retouch menu Sharpen outlines and simplify coloring for a poster effect. Press 2 or 4 to make outlines thicker or thinner. Press J to save the retouched copy.
Color Sketch G button ➜ N retouch menu Create a copy of a photograph that resembles a sketch made with colored pencils. Press 1 or 3 to highlight Vividness or Outlines and press 4 or 2 to change. Vividness can be increased to make colors more saturated, or decreased for a washed-out, monochromatic effect, while outlines can be made thicker or thinner. Thicker outlines make colors more saturated. Press J to save the retouched copy.
Miniature Effect G button ➜ N retouch menu Create a copy that appears to be a photo of a diorama. Works best with photos taken from a high vantage point. The area that will be in focus in the copy is indicated by a yellow frame. To Description Choose Press W (Z) to choose the orientation of the area that will orientation be in focus in the copy. Choose position Press 1 or 3 (wide orientation) or 4 or 2 (tall orientation) to position the frame showing the area that will be in focus in the copy.
Selective Color G button ➜ N retouch menu Create a copy in which only selected hues appear in color. 1 Select Selective color. Highlight Selective color in the retouch menu and press 2 to display a picture selection dialog. 2 Select a photograph. Use the multi selector to highlight a photograph (to view the highlighted photograph full frame, press and hold the X/T button). Press J to select the highlighted photograph and proceed to the next step. 3 Select a color.
4 Highlight the color range. Color range Rotate the main command dial to highlight the color range for the selected color. 5 Choose the color range. Press 1 or 3 to increase or decrease the range of similar hues that will be included in the final photograph. Choose from values between 1 and 7; note that higher values may include hues from other colors. The effect can be previewed in the edit display. 6 Select additional colors.
7 Save the edited copy. Press J to save the retouched copy. Painting G button ➜ N retouch menu Create a copy which emphasizes detail and color for a painterly effect. Press J to save the retouched copy. Before After Edit Movie G button ➜ N retouch menu Trim footage to create edited copies of movies or save selected frames as JPEG stills. Option 9 4 Description Create a copy from which unwanted footage Choose start/end point has been removed. Save selected frame Save a selected frame as a JPEG still.
Side-by-Side Comparison Compare retouched copies to the original photographs. This option is only available if the retouch menu is displayed by pressing the i button and selecting Retouch when a copy or original is played back full frame. 1 Select a picture. Select a retouched copy (shown by a Z icon) or a photograph that has been retouched in full-frame playback. Press i, then highlight Retouch and press J. 2 Select Side-by-side comparison. Highlight Side-by-side comparison and press J.
3 Compare the copy with the original. Options used to create The source image is displayed on the copy left, the retouched copy on the right, with the options used to create the copy listed at the top of the display. Press 4 or 2 to switch between the source image and the retouched copy. To view the highlighted picture full Source image frame, press and hold the X (T) button.
O My Menu/m Recent Settings To display My Menu, press G and select the O (My Menu) tab. G button The MY MENU option can be used to create and edit a customized list of options from the playback, photo shooting, movie shooting, Custom Settings, setup, and retouch menus for quick access (up to 20 items). If desired, recent settings can be displayed in place of My Menu (0 187). Options can be added, deleted, and reordered as described below. ❚❚ Adding Options to My Menu 1 Select Add items.
3 Select an item. Highlight the desired menu item and press J. 4 Position the new item. Press 1 or 3 to move the new item up or down in My Menu. Press J to add the new item. 5 Add more items. The items currently displayed in My Menu are indicated by a check mark. Items indicated by a V icon can not be selected. Repeat steps 1–4 to select additional items.
❚❚ Deleting Options from My Menu 1 Select Remove items. In My Menu (O), highlight Remove items and press 2. 2 Select items. Highlight items and press 2 to select or deselect. Selected items are indicated by a check mark. 3 Delete the selected items. Press J. A confirmation dialog will be displayed; press J again to delete the selected items. A Deleting Items in My Menu To delete the item currently highlighted in My Menu, press the O (Q) button.
❚❚ Reordering Options in My Menu 1 Select Rank items. In My Menu (O), highlight Rank items and press 2. 2 Select an item. Highlight the item you wish to move and press J. 3 Position the item. Press 1 or 3 to move the item up or down in My Menu and press J. Repeat Steps 2–3 to reposition additional items. 4 Exit to My Menu. Press the G button to return to My Menu.
Recent Settings To display the twenty most recently used settings, select m RECENT SETTINGS for O MY MENU > Choose tab. 1 Select Choose tab. In My Menu (O), highlight Choose tab and press 2. 2 Select m RECENT SETTINGS. Highlight m RECENT SETTINGS and press J. The name of the menu will change from “MY MENU” to “RECENT SETTINGS.” Menu items will be added to the top of the recent settings menu as they are used. To view My Menu again, select O MY MENU for m RECENT SETTINGS > Choose tab.
Optional Flash Units The camera can be used with optional external flash units in addition to the built-in flash. Throughout this chapter, operations involving the built-in flash or a flash unit mounted on the camera accessory shoe are indicated by C, operations involving remote flash units by f. For more information on f, see the manual provided with the flash unit.
Remote Flash Photography The following types of wireless flash control (Advanced Wireless Lighting, or AWL) can be used with one or more remote flash units: • Optical AWL via the built-in flash (0 190) • Optical AWL via a shoe-mounted flash unit (0 190, 193) • Radio AWL using settings chosen with the SB-5000 (0 194) • Radio AWL combined with optical AWL via the camera’s built-in flash (0 198) • Radio AWL (0 199) Optional Flash Units 189
Optical AWL Remote flash units can be controlled via optical signals (optical AWL) from the built-in flash or an optional flash unit mounted on the camera accessory shoe. Built-in Flash/SB-500 Use the built-in flash or an optional SB-500 as a master flash controlling remote flash units. 1 C: Raise the built-in flash. Press the M (Y) button to raise the built-in flash. If you will be using an SB-500 as the master flash, mount it on the camera accessory shoe. 2 C: Enable optical AWL.
4 C: Choose the flash control mode. Choose the flash control mode and flash level for the master flash and the flash units in each group: • TTL: i-TTL flash control. • qA: Auto aperture (available only with compatible flash units; note that the built-in flash and SB-500 are not compatible with auto aperture). • M: Choose the flash level manually. • – – (off): The units do not fire and the flash level can not be adjusted. Choose a channel for the master flash.
7 C/f: Compose the shot. Compose the shot and arrange the flash units. See the documentation provided with the flash units for more information. After arranging the units, press the test buttons on the flash units to confirm that all flash units are functioning. 8 C/f: Take photographs. Confirm that the ready lamps on all flash units are lit before each shot.
Other Flash Units For information on using optical AWL with other flash units, see the manual provided with the flash unit. A Optical AWL Position the sensor windows on the remote flash units to pick up the light from the master flash (particular care is required if the camera is not mounted on a tripod).
Radio AWL Using the Controls on an SB-5000 When an SB-5000 is mounted on the camera accessory shoe as a master unit for radio flash control, compatible remote flash units can be controlled by radio signals (radio AWL) from a WR-R10 wireless remote controller. Establishing a Wireless Connection Before using radio AWL, establish a wireless connection between the WR-R10 and the remote flash units. 1 C: Connect the WR-R10. Connect the WR-R10 to the camera.
3 C: Choose a link mode. Select Wireless remote (WR) options > Link mode in the setup menu (0 145) and choose from the following options: • Pairing: Pair the remote flash units with the WR-R10. • PIN: Connect the camera and remote flash units using a fourdigit PIN. 4 f: Establish a wireless connection.
Taking Photographs Settings for the remote units must be adjusted using the controls on each unit. See the flash unit manuals for more information. 1 C: Adjust settings for the master flash. Using the controls on the master flash, choose the flash mode and flash level for the master flash. 2 C: Adjust settings for the remote flash units. Using the controls on the master flash, choose the flash mode and flash level for the remote flash units in each group. 3 f: Group the remote flash units.
5 C/f: Take photographs. The flash-ready indicator will light in the camera viewfinder or flash information display when all flash units are ready. The status of radio-controlled flash units can also be viewed by pressing the i button in the flash information display. A Flash Compensation The flash compensation value selected with the M (Y) button and sub-command dial is added to the flash compensation values selected in the wireless flash options menu.
Optical/Radio AWL For remote flash lighting that incorporates both optically- and radio-controlled flash units, raise the built-in flash and then attach a WR-R10 wireless remote controller and establish a wireless connection between the WR-10 and any radio-controlled flash units (0 194). In the photo shooting menu, select Optical/radio AWL for Flash control > Wireless flash options and configure the built-in flash and remote flash units using Flash control > Group flash options.
Radio AWL To use radio AWL with compatible flash units, raise the built-in flash and then attach a WR-R10 wireless remote controller and establish a wireless connection between the flash units and the WR-R10 (0 194).
Viewing Flash Information In modes P, S, A, and M, you can press the R button to view flash info in the camera information display when any of the following apply: • An SB-500, SB-400, or SB-300 is mounted on the accessory shoe • A WR-R10 is used to control an SB-5000 via radio AWL • The built-in flash is raised for remote flash photography The information displayed varies with the flash control mode. ❚❚ TTL 123 4 5 6 1 Flash-ready indicator.................
❚❚ Group Flash 1 2 3 4 5 6 Flash-ready indicator 1 ............... 196 Remote flash control ................. 203 Remote flash control mode 2 ..... 34 Group flash control mode 2, 3 Group flash mode......................... 32 Flash level/ flash compensation ........... 32, 193 5 Channel 2 .............................. 190, 194 6 Link mode..................................... 146 1 2 3 4 1 Displayed in radio AWL when all flash units are ready.
A Flash Control Mode The information display shows the flash control mode for optional flash units attached to the camera accessory shoe as follows: Flash sync Auto FP (0 102) i-TTL Auto aperture (qA) Non-TTL auto flash (A) Distance-priority manual (GN) Manual Repeating flash Advanced wireless lighting 202 Optional Flash Units —
The Nikon Creative Lighting System (CLS) Nikon’s advanced Creative Lighting System (CLS) offers improved communication between the camera and compatible flash units for improved flash photography.
✔ — ✔ — — ✔6 — — — ✔ — ✔ ✔ —7 ✔ — — — — — — — — — — — — — — ✔ — ✔5 — — — — SB-300 — ✔5 ✔ — — — — ✔5 — — — — SB-400 ✔ ✔ SB-R200 SB-600 ✔ ✔ SU-800 SB-700 ✔ ✔ SB-500 SB-910, SB-900, SB-800 Optical Advanced Wireless Lighting Remote 204 Optional Flash Units SB-5000 Master Remote flash control i-TTL i-TTL Quick wireless [A:B] flash control qA Auto aperture A Non-TTL auto M Manual Repeating RPT flash i-TTL i-TTL Quick wireless [A:B] flash control Auto aperture/ qA/A Non-TTL auto M Manual Re
SB-300 SB-400 SB-R200 SU-800 SB-500 SB-600 SB-700 SB-910, SB-900, SB-800 SB-5000 Auto FP High-Speed Sync 10 ✔ ✔ ✔ ✔ ✔ ✔ ✔ — — FV lock 11 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ AF-assist for multi-area AF ✔ ✔ ✔ ✔ — ✔ 12 — — — Red-eye reduction ✔ ✔ ✔ ✔ ✔ — — ✔ — Camera modeling illumination ✔ ✔ ✔ ✔ ✔ ✔ ✔ — — Camera flash unit firmware update ✔ ✔ 13 ✔ — ✔ — — — ✔ 1 Not available with spot metering. 2 Can also be selected with flash unit. 3 qA/A mode selection performed on flash unit using custom settings.
The SU-800 Wireless Speedlight Commander: When mounted on a CLScompatible camera, the SU-800 can be used as a commander for SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, or SB-R200 flash units in up to three groups. The SU-800 itself is not equipped with a flash. A Flash Mode Selection for Optional Flash Units The flash mode for optional flash units can be selected in the same way as the flash mode for the built-in flash, namely by holding the M (Y) button and rotating the main command dial.
❚❚ Other Flash Units The following flash units can be used in non-TTL auto and manual modes. SB-80DX, SB-30, SB-27 2, SB-23, SB-28DX, SB-22S, SB-22, SB-29 3, SB-28, SB-26, SB-20, SB-16B, SB-21B 3, SB-25, SB-24 SB-50DX 1 SB-15 SB-29S 3 Flash mode A Non-TTL auto ✔ — ✔ — M Manual ✔ ✔ ✔ ✔ G Repeating flash ✔ — — — ✔ ✔ ✔ ✔ REAR Rear-curtain sync 4 1 Select mode P, S, A, or M, lower built-in flash, and use optional flash unit only. 2 Flash mode is automatically set to TTL and shutter-release is disabled.
D Notes on Optional Flash Units Refer to the flash unit manual for detailed instructions. If the flash unit supports CLS, refer to the section on CLS-compatible digital SLR cameras. The D7500 is not included in the “digital SLR” category in the SB-80DX, SB-28DX, and SB-50DX manuals. If an optional flash unit is attached in shooting modes other than j, %, and u, the flash will fire with every shot, even in modes in which the built-in flash can not be used.
D Notes on Optional Flash Units (Continued) The SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-500, and SB-400 provide red-eye reduction, while the SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, and SU-800 provide AF-assist illumination with the following restrictions: 24–30 mm Focal length • SB-5000: AF-assist illumination is available when 24–135 mm AF lenses are used with the focus points shown.
Depending on the lens used and scene recorded, the in-focus indicator (I) may be displayed when the subject is not in focus, or the camera may be unable to focus and the shutter release will be disabled. In mode P, the maximum aperture (minimum f-number) is limited according to ISO sensitivity, as shown below: Maximum aperture at ISO equivalent of: 100 200 400 800 1600 3200 6400 12800 4 4.8 5.6 6.7 8 9.
Technical Notes Read this chapter for information on connecting to other devices and on compatible accessories. Connections Installing ViewNX-i To fine-tune photos and upload and view pictures, download the latest version of the ViewNX-i installer from the following website and follow the on-screen instructions to complete installation. An Internet connection is required. For system requirements and other information, see the Nikon website for your region. http://downloadcenter.nikonimglib.
Copying Pictures to the Computer Before proceeding, be sure you have installed ViewNX-i (0 211). 1 Connect the USB cable. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on. D USB Hubs Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. A Use a Reliable Power Source To ensure that data transfer is not interrupted, be sure the camera battery is fully charged.
2 Start Nikon Transfer 2 component of ViewNX-i. If a message is displayed prompting you to choose a program, select Nikon Transfer 2. D During Transfer Do not turn the camera off or disconnect the USB cable while transfer is in progress. A Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. 1 Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Nikon Transfer 2 and click OK. 2 Double-click .
3 Click Start Transfer. Pictures on the memory card will be copied to the computer. Start Transfer 4 Terminate the connection. When transfer is complete, turn the camera off and disconnect the USB cable. A For More Information Consult online help for more information on using ViewNX-i.
Printing Photographs Selected JPEG images can be printed on a PictBridge printer connected directly to the camera. ❚❚ Connecting the Printer Connect the camera using the supplied USB cable. Do not use force or attempt to insert the connectors at an angle. When the camera and printer are turned on, a welcome screen will be displayed in the monitor, followed by a PictBridge playback display. D Selecting Photographs for Printing NEF (RAW) photographs (0 36) can not be selected for printing.
❚❚ Printing Pictures One at a Time 1 Display the desired picture. Press 4 or 2 to view additional pictures. Press the X (T) button to zoom in on the current frame (press K to exit zoom). To view six pictures at a time, press the W (Z) button. Use the multi selector to highlight pictures, or press the X (T) button to display the highlighted picture full frame. 2 Adjust printing options.
3 Start printing. Select Start printing and press J to start printing. To cancel before all copies have been printed, press J. ❚❚ Printing Multiple Pictures 1 Display the PictBridge menu. Press the G button in the PictBridge playback display. 2 Choose an option. Highlight one of the following options and press 2. • Print select: Select pictures for printing.
3 Adjust printing options. Adjust printer settings as described in Step 2 of “Printing Pictures One at a Time” (0 216). 4 Start printing. Select Start printing and press J to start printing. To cancel before all copies have been printed, press J.
Viewing Photographs on TV The optional High-Definition Multimedia Interface (HDMI) cable (0 222) or a type C HDMI cable (available separately from thirdparty suppliers) can be used to connect the camera to highdefinition video devices. Always turn the camera off before connecting or disconnecting an HDMI cable. Connect to camera Connect to high-definition device (choose cable with connector for HDMI device) Tune the device to the HDMI channel, then turn the camera on and press the K button.
❚❚ HDMI Options The HDMI option in the setup menu (0 143) controls output resolution and other advanced HDMI options. Output Resolution Choose the format for images output to the HDMI device. If Auto is selected, the camera will automatically select the appropriate format. Advanced Option Description Auto is recommended in most situations.
A Television Playback Use of an AC adapter and power connector (available separately) is recommended for extended playback. If the edges of photographs are not visible in the television display, select 95% for HDMI > Advanced > Output display size (0 220). A Slide Shows The Slide show option in the playback menu can be used for automated playback (0 24). A HDMI and Live View When the camera is connected via an HDMI cable, HDMI displays can be used for live view photography and movie recording.
Other Accessories At the time of writing, the following accessories were available for the D7500. Power sources • EN-EL15a Rechargeable Li-ion Battery (0 153): Additional EN-EL15a batteries are available from local retailers and Nikon service representatives. EN-EL15 batteries can also be used. • MH-25a Battery Charger: The MH-25a can be used to recharge EN-EL15a batteries. MH-25 battery chargers can also be used.
Viewfinder eyepiece accessories • DK-20C Eyepiece Correction Lenses: Lenses are available with diopters of –5, –4, –3, –2, 0, +0.5, +1, +2, and +3 m–1 when the camera diopter adjustment control is in the neutral position (–1 m–1). Use eyepiece correction lenses only if the desired focus can not be achieved with the built in diopter adjustment control (–2 to +1 m–1). Test eyepiece correction lenses before purchase to ensure that the desired focus can be achieved.
Filters Microphones • Filters intended for special-effects photography may interfere with autofocus or the electronic rangefinder. • The D7500 can not be used with linear polarizing filters. Use the C-PL or C-PLII circular polarizing filter instead. • Neutral Color (NC) filters are recommended for protecting the lens. • To prevent ghosting, use of a filter is not recommended when the subject is framed against a bright light, or when a bright light source is in the frame.
Remote controls/ wireless remote controller/ remote cords • ML-L3 Wireless Remote Control: The ML-L3 uses a 3 V CR2025 battery. Pressing the battery-chamber latch to the right (q), insert a fingernail into the gap and open the battery chamber (w). Ensure that the battery is inserted in the correct orientation (r).
GPS units USB cables HDMI cables (0 219) Software GP-1 GPS Unit/GP-1A GPS Unit: Connect to the camera accessory terminal to record the current latitude, longitude, altitude, and UTC (Coordinated Universal Time) with pictures taken with the camera (0 144). UC-E20 USB Cable (0 212, 215): A USB cable with a Micro-B connector for connection to the camera. HC-E1 HDMI Cable: An HDMI cable with a type C connector for connection to the camera and a type A connector for connection to HDMI devices.
Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connector and AC adapter. 1 Ready the camera. Open the battery-chamber (q) and power connector (w) covers. 2 Insert the EP-5B power connector. Be sure to insert the connector in the orientation shown, using the connector to keep the orange battery latch pressed to one side. The latch locks the connector in place when the connector is fully inserted. 3 Close the batterychamber cover.
4 Connect the EH-5b/EH-5c AC adapter. Connect the AC adapter power cable to the AC socket on AC adapter (e) and the power cable to the DC socket (r). A V icon is displayed in the monitor when the camera is powered by the AC adapter and power connector.
Available Settings The following table lists the settings that can be adjusted in each mode. Note that some settings may be unavailable depending on the options selected.
Other settings Metering Exposure compensation Bracketing Flash mode (built-in flash) Flash mode (optional flash units) Flash compensation (built-in flash) Flash compensation (optional flash units) FV lock (built-in flash) FV lock (optional flash units) Autofocus mode (viewfinder) AF-area mode (viewfinder) AF mode (Live view) AF-area mode (Live view) 230 Technical Notes i — — — j — — — P, S, A, M ✔ ✔ ✔ k, p, n, o, s, w, 0 — ✔ — l, m, r, t, u, v, x, y, z — ✔ — % — ✔ — f, d — ✔ — e — ✔ — ' — ✔ — i
P, S, A, i j M a9: Built-in AF-assist ✔ ✔ ✔ ✔3 illuminator b3: Easy exposure — — ✔ — compensation b4: Matrix metering — — ✔ — b5: Center-weighted — — ✔ — area d4: Electronic front— — ✔ — curtain shutter e2: Flash shutter speed — — ✔ — e3: Exposure comp. for — — ✔ — flash e4: Auto M ISO — — ✔ — sensitivity control e5: Bracketing order — — ✔ — Auto ISO sensitivity control is not available. Subject-tracking AF is not available. Not available in w mode. Available only in x, y, and z modes.
Lenses That May Block the Built-in Flash and AF-Assist Illuminator The lenses listed in this section may block the built-in flash or AF-assist illuminator under some conditions. ❚❚ AF-Assist Illumination The AF-assist illuminator has a range of about 0.5–3.0 m (1 ft 8 in.–9 ft 10 in.); when using the illuminator, use a lens with a focal length of 18–200 mm. Some lenses may block the illuminator at certain focus distances. Remove lens hoods when using the illuminator.
At a range of 1.0 m (3 ft 4 in.) or less, the following lenses may block the AF-assist illuminator and interfere with autofocus when lighting is poor: • AF-S DX VR Zoom-Nikkor 18–200mm f/3.5–5.6G IF-ED • AF-S NIKKOR 24–70mm f/2.8G ED • AF-S NIKKOR 24–70mm f/2.8E ED VR • AF Zoom-Nikkor 24–120mm f/3.5–5.6D IF • AF-S Zoom-Nikkor 28–70mm f/2.8D IF-ED • AF Zoom Micro Nikkor ED 70–180mm f/4.5–5.6D • AF-S VR Micro-Nikkor 105mm f/2.8G IF-ED At a range of 1.5 m (4 ft 12 in.
❚❚ The Built-in Flash The built-in flash can be used with lenses with focal lengths of 16–300 mm, although in some cases the flash may be unable to entirely light the subject at some ranges or focal lengths due to shadows cast by the lens (see the illustration below), while lenses that block the subject’s view of the red-eye reduction lamp may interfere with red-eye reduction. Peripheral illumination may drop at focal lengths under 16 mm. Remove lens hoods to prevent shadows.
Lens Zoom position Minimum distance without vignetting AF-S DX Zoom-Nikkor 17–55mm f/2.8G IF-ED 24 mm 1.0 m/3 ft 4 in. 28–55 mm 18 mm 24–140 mm 18 mm No vignetting 1.0 m/3 ft 4 in. No vignetting 1.0 m/3 ft 4 in. 24–200 mm No vignetting 28 mm 50–300 mm 1.5 m/5 ft No vignetting 35 mm No vignetting AF-S DX NIKKOR 18–140mm f/3.5–5.6G ED VR AF-S DX VR Zoom-Nikkor 18–200mm f/3.5–5.6G IF-ED AF-S DX NIKKOR 18–200mm f/3.5–5.6G ED VR II AF-S DX NIKKOR 18–300mm f/3.5–5.
When 1.3× (18×12) is selected for Choose image area, the flash may be unable to light the entire subject with the following lenses at ranges less than those given below. Lens AF-S DX NIKKOR 10–24mm f/3.5–4.5G ED AF-S DX Zoom-Nikkor 12–24mm f/4G IF-ED AF-S DX Zoom-Nikkor 17–55mm f/2.8G IF-ED AF-S DX NIKKOR 18–300mm f/3.5–5.6G ED VR AF-S NIKKOR 14–24mm f/2.8G ED AF-S NIKKOR 16–35mm f/4G ED VR AF-S Zoom-Nikkor 17–35mm f/2.8D IF-ED AF-S NIKKOR 24–70mm f/2.8G ED AF-S NIKKOR 24–70mm f/2.
The built-in flash can also be used with the following non-CPU lenses: Nikon Series E and 16–300 mm NIKKOR (AI-S, AI-, and AImodifed). AI 50–300mm f/4.5, modified AI 50–300mm f/4.5, AI-S 50–300mm f/4.5 ED, and AI 50–300mm f/4.5 ED lenses must be used at a zoom position of 70 mm or above.
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
SB7E02(11) 6MB37911-02 En SnapBridge Connection Guide (Android TM) Read this guide for information on using SnapBridge to pair your camera with your smart device (smartphone or tablet). Get SnapBridge Now! Use SnapBridge to control the camera remotely from your smart device and download pictures from the camera. Download It Free Today! SnapBridge is available free-of-charge from Google Play™ and from the following website: http://snapbridge.nikon.
1 Camera: Turn the camera on. Wait for the cam- Connection wizard 2 Camera: The launch prompt will be displayed. Launch prompt era to display the connection wizard and then press J. Proceed to Step 3. D NFC Some cameras, such as the NFC dialog D500 and D5600, may display an NFC dialog. Touch the NFC antenna on the smart device to the camera N logo (N-Mark), then wait for SnapBridge to launch and proceed to Step 5. To connect without using NFC, press the camera J button and proceed to Step 3.
3 Smart device: Launch SnapBridge on your smart device and tap the camera name. D Camera Name Not Displayed The camera name may not be listed if SnapBridge is started before the camera displays the launch prompt. Confirm that the launch prompt is displayed and then quit and restart SnapBridge. 4 Camera/smart device: Check the authentication code. • Camera: The authentication code is displayed in the camera monitor.
5 ! This step involves both the camera and the smart device. Have them ready side-by-side before proceeding. Camera/smart device: Press J on the camera and tap PAIR in SnapBridge (the PAIR button may be labelled differently depending on what version of the operating system you are using). ! If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed. • Camera: Press J and return to Step 1.
A Trouble Downloading? If download is slow or you experience other problems copying pictures from the camera to your smart device, try ending and restarting pairing. 1 Smart device: Open the Connect tab, select Connection options, tap End pairing, and tap Yes when prompted. 2 Camera: Display the SnapBridge launch prompt by Launch prompt selecting Connect to smart device in the setup menu (digital SLR cameras) or network menu (compact digital cameras) and following the on-screen instructions.
Trademark Information Android is a trademark of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License.
SB7E02(11) 6MB38011-02 En SnapBridge Connection Guide (iOS) Read this guide for information on using SnapBridge to pair your camera with your iOS device and on what to do when the SnapBridge Wi-Fi prompt is displayed. Get SnapBridge Now! Use SnapBridge to control the camera remotely from your iOS device and download pictures from the camera. Download It Free Today! SnapBridge is available free-of-charge from the Apple App Store® and from the following website: http://snapbridge.nikon.
1 Camera: Turn the camera on. Wait for the cam- Connection wizard 2 Camera: The launch prompt will be displayed. Launch prompt era to display the connection wizard and then press J. Proceed to Step 3. D NFC Some cameras, such as the D500 and D5600, may display an NFC dialog. Press J and proceed to Step 3.
3 iOS device: Launch SnapBridge on your iOS device and tap the camera name. D Camera Name Not Displayed The camera name may not be listed if SnapBridge is started before the camera displays the launch prompt. Confirm that the launch prompt is displayed and then quit and restart SnapBridge. 4 iOS device: A confirmation dialog will be displayed; read the pairing instructions carefully and tap Understood. 5 iOS device: When prompted to select an accessory, tap the camera name again.
6 ! This step involves both the camera and the iOS device. Have them ready side-by-side before proceeding. Camera/iOS device: Press J on the camera and tap Pair in SnapBridge (the Pair button may be labelled differently depending on what version of the operating system you are using). ! If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed. • Camera: Press J and return to Step 1.
Forgetting Bluetooth Devices If pairing fails in Step 6, you will need to request iOS to “forget” the camera as described below, as otherwise the camera name may not be displayed or tapping the camera name will not start pairing when you return to Step 3. 1 Open iOS settings. 2 Tap Bluetooth. 3 Tap the name. icon to the right of the camera 4 Tap the “forget” option and repeat the pairing process from the beginning.
A Trouble Downloading? If download is slow or you experience other problems copying pictures from the camera to your iOS device, try ending and restarting pairing. 1 iOS device: Open the Connect tab, select Connection options, tap End pairing, and tap Yes when prompted. Next, request iOS to “forget” the camera as described in “Forgetting Bluetooth” devices.
D Auto Upload Auto upload is only available while the SnapBridge app is running. Auto upload will resume automatically when the SnapBridge app is launched. A Standby Timer/Auto Off Until you are familiar with SnapBridge and your camera, we recommend choosing a longer standby timer (SLR cameras) or auto off delay (compact digital cameras).
The Wi-Fi Prompt SnapBridge will prompt you to switch to a Wi-Fi connection before starting remote photography or downloading high volumes of data. Follow the steps below to connect to the camera via Wi-Fi. 1 Tap Go when prompted. The camera SSID and password will be displayed; make a note of the SSID and password before continuing. 2 Tap < Settings to display iOS settings. 3 Tap Wi-Fi. 4 Tap the SSID you noted in Step 1.
5 Enter the password you noted in Step 1 (see “Passwords”, below). Note that passwords are case-sensitive. Once you have entered the password, you will not be prompted to do so when connecting to the camera again unless the password has changed in the interim. A Checking That SnapBridge Is Connected via Wi-Fi If your iOS device is connected via Wi-Fi to a device other than your camera, iOS will display a Wi-Fi icon but SnapBridge will not. Repeat Steps 1–5 to connect to your camera via Wi-Fi.
Why Is the Wi-Fi Prompt Displayed? The Wi-Fi prompt is displayed when: • SnapBridge switches from Bluetooth to Wi-Fi. SnapBridge automatically switches between Bluetooth and Wi-Fi to save power. The Wi-Fi prompt is displayed when SnapBridge switches from Bluetooth to Wi-Fi. Note that SnapBridge may need a few seconds to switch to Wi-Fi after you perform such operations as selecting remote photography in the Camera tab. • SnapBridge detects the camera after losing the Wi-Fi connection.
Discover the photographer in you Learn to make incredible photos easily with expert instruction. Nikon School seminars will help you make the pictures you want.
Nikon Serial No. • • • • • ::0 ,.--- ~· <( ':./) • Model AF-S OX 18-14013.5-5.6G ED VR Nikon Inc. Lens ONE YEAR USA LIMITED WARRANTY (Valid in the Continental United States, Alaska, Hawaii, Puerto Rico and U.S. Virgin Islands) To activate your ESC you must register your ESC online with Nikon Inc. within ten days from the date of the original retail purchase of this NIKKOR Lens. Failure to register your ESC within such ten day period invalidates your ESC. To register online: http://www.nikonusa.
Nikon Retain this International Warranty with proof of purchase (bill of sale) for your records • • • • • <.o ,..- ~·
• • • • • ~· :"' V) <:tI fqr warrantY covera.ge . • • • • • ·• n I ........ . N ..j:::..
• • • • • • ~· ('.1 M "'i'I