User's Manual
гг
Various power switch
: : :
The remote control buttons have different functions depending on the active mode. To change the mode, press the desired
button on the right side of the panel (Input/Output mode select buttons).
To check which mode is selected, just press any button other than the Input/Output select buttons and the active mode will light
up.
About R2-D2 sound (R2-D2 sounds are emitted by a special internal speaker inside R2-D2): When
the power is ON, etc., R2-D2 sounds will be made automatically. Also, R2-D2 sounds can be
made by pressing the R2-D2 sounds button. Each time the button is pressed, R2-D2 sounds are
randomly played.
Explanation of remote control buttons
Input/output
select buttons
:
:
:
:
Button used when controlling R2-D2
or adjusting projection position
: : : :
: : : : :
Sound adjust button
: : : : :
: : : : :
Adjustment menu calling button
Default settings screen calling
button
Safety sensor
release button
R2-D2 Sound
Effects Button
Various buttons
for playing
:
:
:
:
:
:
Projected picture
adjustment:
:
Turns projector power ON/OFF
Turns DVD drive power ON/OFF
Turns power of iPod inserted in slot ON/OFF
When this button is pressed while in DVD mode, it changes to MEDIA mode.
Power switch
Remote control
and stand setup
Convenient functions