NMD360 – Audioset USER MANUAL EN © Elmarc, 16/02
Content 1 1.1 1.2 1.3 Safety 3 Labels in this manual 3 General safety instructions 3 Intended use 3 2 Preparations for use 2.1 Unpacking 2.2 Package contents 5 5 5 3 3.1 3.2 3.3 3.4 6 6 6 7 7 Installation Install batteries Connecting the system Connecting random equipment Connecting to the mains 4 Functions 4.1 Remote control 4.2 NMD360 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.
1 Safety 1.1 Labels in this manual 11 WARNING A warning means that injury or death is possible if the instructions are not obeyed. 11 CAUTION A caution means that damage to the equipment is possible. 55 A note gives additional information, e.g. for a procedure. 1.2 General safety instructions 66 WARNING Do not put force on the appliance. The appliance can fall and can cause serious injury. 11 CAUTION Do not spill any liquid on the appliance. 66 WARNING Do not insert any objects in the ventilation holes.
55 The appliance has built in copyright protection technology that prevents copying from a disc to any media. If a video recorder is connected to the appliance, the video output image will be distorted during recording. Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
2 Preparations for use 2.1 Unpacking • Unpack the appliance carefully. • Check the package contents as described below. If any item is missing, please contact your reseller. • Remove the labels from the front panel carefully if present. 55 We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service. This is the only way to safely protect the product against damage in transit.
3 Installation 3.1 Install batteries • Remove the battery cover. • Insert the batteries matching the (+) and (-) polarity markings. 11 CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance. Corrosion, oxidation, battery leakage and any other gradually acidic defect of this nature will invalidate the guarantee. 3.2 Connecting the system L R • Connect the speakers to the appliance.
3.3 Connecting random equipment • Connect the tv Use one of the cables as presented in the image below. COAXIAL ANT AUX SPEAKERS AUDIO VIDEO HDMI OUT OUT OUT OPTICAL USB • Plug the HDMI cable into your TV and your% 1%. • Stereo audio: Connect a suitable cable to the R/L channels of the AUDIO OUT connection. • To connect an external audio device, insert the cable plug in the AUX IN jack (L/R). 3.4 Connecting to the mains • Connect the appliance to the mains. • Switch on the appliance.
4 Functions 4.1 Remote control 1 17 2 18 3 19 4 20 5 21 USB 6 7 8 9 OPTICAL COAXIAL BT/FM DISC DOCK ARC AUX TITLE SUBTITLE ANGLE ZOOM REPEAT A-B MENU OSD EQ AUDIO DIMMER RDS ALBUM/PRESET CLOCK 510 2 22 23 24 25 SLEEP 27 ENTER 26 25 28 11 SETUP 12 29 13 VOL 31 14 15 16 30 1 2 3 4 5 6 7 8 9 GOTO 0 PROG 32 NIKKEI 1. STANDBY button 2. DOCK/OPTICAL button 3. DISK/USB button 4. SUBTITLE button 5. TITLE button 6. A-B button 7. REPEAT button 8.
• Press the% 1%% 2% to adjust the brightness level of the display. • SUBTITLE (4): select the subtitles for the VIDEO file that is playing (if available) • The A-B REPEAT function can be used to repeat a specific section of a DVD. • Press the SETUP button (11) to open or close the Setup menu. • To select the camera angle, press the ANGLE button (20). • Press the GOTO button (16) to load the Quick Start menu.
5 Operation 5.1 Quick start • To switch on the appliance, press the STANDBY button (1). To switch back to the standby mode, press the STANDBY button (1) again. • To adjust the volume, press the VOL + button or the VOL - button (31). • To mute or restore sound, press the MUTE button (29). DVD/CD functions • Turn on the television. • Switch on the appliance. • To select the source mode DVD/ CD, press the DISC button (3). • Place a disc in the disc tray.
5.2 General setup menu operation This chapter explains a complete setup of the appliance: settings of screen display, audio setup and video setup. To change the initial settings The following actions have to be carried out with the remote control. • Press the SETUP button (11). • Press the arrow buttons (left and right) (30) to select a menu. The submenu is displayed directly. • Press the arrow buttons (up and down) (28) to scroll through the submenu.
Language setup page • In the SUBTITLE section, choose the subtitle language. • In the AUDIO section, choose the audio language. • In the DISC MENU section, choose the language for the disc menu. Rating setup page • PARENTAL • Set a rating for movies played by the appliance. Movies rated higher than the level set for the parental lock can not be viewed. 55 This function is only available with discs that have parental rating encoded. Password Change the default password.
Setting the alarm time • The clock must be correctly set for the timer to operate correctly. • In STANDBY mode, press and hold the TIMER/SLEEP button until the hour digits flash on the display. • Press the arrow buttons (28) to adjust the hour digits, and then press the TIMER/SLEEP button or ENTER button to confirm. The minute digits will flash on the display. • Press the arrow buttons (28) to adjust the minute digits, and then press the TIMER/SLEEP button or ENTER button to confirm.
• Touch PROG (32) to add the current station to your favourites 5.5 USB functions Preparation • Turn on the television. • Insert the USB device in the slot . The device can only be connected one way. • Press the USB/DISK button (3). After the device has been connected, a content menu will display on the TV screen. • Press the arrow button (28) (30)(up/down/left/right) to select a folder or a file recognized by the yellow marking. • Press the ENTER button (27) to open or play the selected folder or file.
5.6 AUX IN BT/FM/ AUX L R AUX • Connect the external appliance to your NMD360 Microset. • Select BT/FM/AUX mode. • Use the BT/FM/AUX (19) key for this. 5.7 iPad/ iPhone/ iPod functions 1 OPTICAL/ DOCK • Place the iPad in the docking station • Press the DOCK button (2). The LED display will show IPOD. It could take around 15 seconds for the NMD360 to identify the iPod/ iPhone/iPad. • To start playback, press the PLAY/ PAUSE button (12) once.
5.8 Operation with BLUETOOTH PINcode 0000 Max. 8m BT You can wirelessly connect the to devices that have Bluetooth. Establishing a Bluetooth connection (PAIREN) • Turn on the Bluetooth function of your device • To select the source mode BLUETOOTH, press the BT/FM/AUX button (19). • Press and hold the button PLAY/ PAUSE (12) to activate the Bluetooth pairing mode. • Search Bluetooth devices and select BT to establish connection • Enter "0000" when the mobile device asks for the PIN code.
6 Cleaning and maintenance 6.1 Handle and care of a disc • Hold the disc with fingers. Hold the disc outer edge and/or the centre spindle hole. Do not touch the disc surface. • Do not bend or press the disc. Do not expose the disc to direct sunlight or heating sources. • Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently, radially, from centre towards the outer edge. • Do not apply thinner, alcohol, chemical solvent, or sprays when cleaning.
7 Technical data NMD360 Microset • Voltage: 220-240VAC / 50 Hz • Speaker output: 2 x 50W RMS • HDMI-output • Television system: PAL/NTSC • Frequency range: 50Hz ~60Hz Remote control • Battery size: AAA Radio • Frequency range: 87,5~108 MHz Supported media formats • Disc types: DVD / DVD+R(W) / DVD-R(W) / S (VDC) / CD / CD-R / CD-RW • Picture formats: JPEG / Kodak Picture CD • Video formats: Mpeg4 Xvid (SD) / vob files • Audio formats: MP3/WMA Working environment • Operating temperature: - 10 ~ +35 C(elsius)
8 Disposal of used electric and electronic equipment The meaning of the symbol on the material, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste. In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product.