D110 Operating Instructions
A Letter to our Customers Dear customers Thank you for choosing NiiMbot. NiiMbot is committed to providing the most intelligent label solution and the best customer service. Please feel free to contact us if you have any questions or suggestions during the use of our products. We pay great importance to user experience, and we are willing to hear our customers’ voices to optimize our products and software. The voice of every customer is the inspiration and impetus to the development of NiiMbot.
01 Terms and Conditions Agreement is the required and legal agreement of the application market. For unregistered users who agree with the agreement will not be collected the information. The permission to location access is for a faster and more stable Bluetooth connection. Because of different network service providers in different countries, when accessing the location, the app can detect the device nearby more rapidly.
01 01 Basic Parameters 02 02 Basic Usage 03 03 Indicator Light Instructions 07 04 Quickstart Guide 08 05 Q&A 14 06 Cleaning Procedure 20 07 After-sales Service 21 08 Notes 22
01 03 · 0402 01 Basic Parameters Model D110 Material ABS+PC Color Printing method Resolution Printing speed Label width range Frequency Power White Thermal 203dpi 15mm/s~20mm/s 15mm 2.4G BT Power Connection Bluetooth 4.
03 02 Basic Usage Slide left to open the lid 1.Lid opening method 90° 2.
04 Detector Paper bin 3.
05 Make sure 0.1-0.2 inch of label paper left outside. Make the label sticker side down Be sure to slide to t he rightmost 4.
06 1 2 1 2 Power Button Indicator light 5.Press the power button about 3-5 seconds to start printer Connect the printer with APP to set consumable specifications. Edit the print contents and press OK to print.
07 03 Indicator Light Instructions Indicator light Status Instruction Blue Strobe slowly Bluetooth not connected Blue Strobe quickly During printing and charging Blue Red Normally on Bluetooth connected and battery fully charged Bluetooth not connected and low Strobe slowly battery Red Strobe quickly Red Normally on Printing and charging with low battery Bluetooth connected and low battery
08 04 Quickstart Guide App Download 1. Search NIIMBOT in Google App Store or App Store to download. 2. NIIMBOT APP is compatible with Android, Microsoft and iOS systems. 2 About new device: There is usually some power left for customers to boot up the new Niimbot label maker. If there is not, please charge the device for 20 minutes before turning on it. 3 Bluetooth connection 1. Turn on the Bluetooth and label maker, and then open NIIMBOT app.
09 2. Click on the “unconnected” button in the top right corner of the app, then choose the correct device (e.g. D110 series) and click on “search”. Your device will be found.
10 3. Click on “pair”or “connect”, you will successfully connect to the Bluetooth. Note: If a PIN code is needed, please enter 1234 or 0000. 4 Label loading 1. Slide the button on the cover of the device to open the cover. 2. Place the label sticker facing down and load it in the paper bin. Make sure 0.1-0.2 inch of label paper left outside.
11 2. Close the cover and make sure some label paper is left outside. Note: 1. If the label is laid reversely, blank pages will continue to be printed. 2.No label paper left outside will cause the abnormal paper feeding. The device will not response or response without paper feeding. Make sure 0.1-0.2 inch of label paper left outside.
12 5 Printing Steps 1. After Bluetooth connection and correct paper loading, the app automatically identifies the label template and displays it. Click on the recognized template and go into the editing page. 2. Click on【Text】at the lower part of the page, the text box pops up. Double click the text box and edit labels in the entry bar. Click【Confirm】next to the entry bar to finish the editing. Double click the text box again for modification, and edit what you need in the entry bar and confirm. 3.
13 6 Note: 1. D110 label maker applies direct thermal printing technology and uses chemically-treated paper that darkens when heated by a thermal print head. At present, the only black printout is supported. 2.There is a number of materials in the app, including but not limited to symbols, figures, simple images, QR codes, bar codes, intelligent Identification function and so on, which can help to create personalized labels. 3.
14 05 Q&A 1 Question: Is there one roll of label paper offered for free? What style is it? Answer:Only print er means only D110 , you need t o buy label paper, and w e have many set s. 2 Question: Why can not the label maker be fully charged when being plugged into the laptop, causing automatic shutdown after unplugging? Answer: The output voltage of the laptop USB interface is insufficient and unstable, which is unable to provide a stable charging environment. Please use a wall socket for charging.
15 5 Question: Will the machine be automatic shut down? Answer: After being disconnected the Bluetooth or the app is not used for 15 minutes, the machine will automatically shut down, saving power and protecting the battery. 6 Question: Why does the machine work normally but keep printing blank paper? Answer: It may be because the label paper is laid reversely, please keep the label sticker side down.
16 7 Question: Why does the machine keep feeding paper? Answer: （1）It may be because there is label or residues sticking on the detectors on the cover or in the paper bin. （2）It may be because there is label or residues sticking on the print head. The label paper failed to be detected. （3）D110 label maker is only suitable for NiiMbot label range. Other Brand label paper will not work and cause unsatisfied printing results. （4）The detectors are malfunctioning，please contact the seller.
17 （2）There are residues sticking on the detectors, resulting in failed label detection. Please remove the residues. （3）It may be because of temporary failure of chip detection. Please contact customer service and provide the label code. Our Tech Support will fix the problem for you in 10 minutes. 10 Question: Why is the Bluetooth suddenly disconnected and fail to be connected for many times? Answer: It may be because the Bluetooth system crashes. Please reboot the phone and the Bluetooth.
18 Answer: D110 supports batch printing. The APP currently supports up to 999 labels in one batch. But considering the actual number of label paper in different sizes, around 300 label stickers can be printed in one batch at most. 13 Question: In what situation does the error “cover is open” pop out? Answer: There are possibilities as follows: （1）The cover is not closed properly. Please repeat opening and closing the cover for several times. （2）Label paper is laid reversely. Please load it correctly.
19 15 Question: What is the reason for the sudden stopping of printing. Answer: In order to ensure the safety of the label maker, multiple protection modes have been programmed. In the event of “lack of paper” , “cover open” , “data error” , “ overheat temperature” , “low on battery” and other issues, the machine will stop printing. Please analyse the problem according to the actual situation.
20 06 Cleaning Procedure 1 Turn off the label maker; 2 Wait the print head to cool off completely after printing. Open the cover to find print head; 3 Clean the dust or residues with alcohol cotton ball (drained); 4 Wait 5-10 minutes to make sure the alcohol has been volatilized before closing the cover.
21 07 After-sales Service 1 Customers enjoy free return and exchange service within 30 days from the date of receipt of the product. 2 Customers enjoy one replacement service within one year from the date of receipt of the product. 3 Customers enjoy an additional two-year warranty service from the date of receipt of the product. Please contact Customer Service who will provide the perfect after-sales service.
22 08 Notes 1 Safely keep this product and accessories out of the reach of children to prevent danger. 2 Do not open the paper bin when the machine is printing. 3 Make sure that the paper bin is clean before using. If there is any residue inside, it may cause damage to the print head while printing. 4 Wipe the print head and paper bin gently with a clean, soft cloth. Solutes, corrosive chemicals , or detergents such as benzene or thinners are prohibited.
23 7 In the event of the damaged power cable, please do not use it as this may result in electric shock, fire or damage to the power adapter. 8 After printing, the print head may be still hot. Do not touch it to avoid bums. 9 Use NiiMbot label range, otherwise, poor print quality or damage to the printer may happen. 10 lf documents which will be preserved for long-term need to be printed, please choose long-lasting thermal label paper. 11 Charge the battery in a cool and airy room.
24 12 When unplugging the printer, grab the power adapter. Pulling the power cable directly will damage the cable. 13 Do not use the printer where there are Inflammable substances like gas stations and fuel warehouses. 14 If there is any problem about usage, please contact the dealers or NiiMbot after-sales service. NIIMBOT will provide the best after-sales service for global customers! Declaration of conformity Hereby, Wuhan Jingchen Intelligent Identification Technology Co., Ltd.
Ｔｈａｎｋ ｙｏｕ ｆｏｒ ｙｏｕｒ ｐｕｒｃｈａｓｅ． Ｐｌｅａｓｅ ｃｈｅｃｋ ｔｈｅ ｎｅｗ ｕｓｅｒ ｇ ｕｉｄｅ ｖｉｄｅｏ： https:/ / www.am azon.com / vdp/ 0c2c1af771294c5cb02797b1f05bcdc6 Wuhan Jingchen Intelligent Identification Technology Co.,Ltd. Address: Creative Workshop, No. 5 Creative World, Yezhihu West Road, Hongshan District, Wuhan Technical Support Email: service@niimbot.com Official website: www.niimbot.
