Assembly Instruction

See below for
Preparation of arms
for assembly.
i
Hardware in this box
2
Page 1 of 1
Assembly
Instructions
1
One pair of Bifold Arms
i
Tap Wooden Dowels all the way into the middle
hole before assembly to Arms.
5
Fit Wood Button Into Arm Holes
Instructions for Bifold Body assembly, are packed in the Body box.
AFTER TOTAL ASSEMBLY:
Push fit or lightly tap
the wooden buttons
into the bolt holes
on the arms.
Fasten Stretcher Brackets to Arm
3 4
Assemble the Bifold Body
Naples-0404
BIFOLD FUTON FRAME
FUTON ARMS
Outside View Inside View
16mm Bolts x 4 Pieces:
For the Stretcher Brackets
Allen Key
x 1 Piece
Wooden Dowel
x 4 Pieces
60mm Bolts x 8 Pieces:
For the Front & Back Legs
Stretcher Bracket
x 4 Pieces
Wood Button
x 8 Pieces
Barrel Nuts
x 8 Pieces
A.
C.
Insert the Stretcher Bracket Cleat
into the hole provided.
Each arm requires two brackets, front and back.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Hole
for cleat
Leg
Dowel
Hole
Stretcher
Bracket
16mm Bolt
Allen Key
Hole
for bolt
Cleat
Wooden Dowel
Stretcher
(BODY BOX)
Middle hole