Specifications

ZW35 Scene Control 700

SPECIFICATIONS

Model: ZW35

Power: 120V AC, 60Hz

Signal (Frequency ): 908.42 MHz

Maximum Load: 960W Incandescent,

HP Motor or 1800W (15A) Resistive

Range: Up to 100 feet line of sight

Controller (HUB) and the closest Z-Wave Module Operating Temperature Range: 32-104

(0-40

C) For indoor use.

Approval: ETL/FCC/Z-Wave Plus Certi

ﬁ

FCC ID: 2AQURZW35

• Switch button: 15 A relay for Z-Wave on/off control

• 4 remote control buttons: trigger scenes and control other devices in your Z-Wave network

from this switch

• NEW 700 senes Z-Wave chip for better range and faster control

• Direct 3-Way: works with regular on/off switc h es In a 3-way

• Scene control: trigger actions with multi-tap (select hubs only)

• Smart bulb mode: disable relay and control the light via Z-Wave

• Adjustable LED indicator in 4 colors and 3 brightness levels

• S2 Security and SmartStart for easier inclusion

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

PAGE 1
ZW35 Scene Control 700 SPECIFICATIONS Model: ZW35 Power: 120V AC, 60Hz Signal (Frequency): 908.42 MHz Maximum Load: 960W Incandescent, ½ HP Motor or 1800W (15A) Resistive Range: Up to 100 feet line of sight Controller (HUB) and the closest Z-Wave Module Operating Temperature Range: 32-104° F (0-40° C) For indoor use.
PAGE 2
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.