User's Manual

ManualsBrandsNIDEC SANKYO ManualsElectronicsID Card Reader

No ASR – NP – 20847 – 02

Table of contents

1. Product name ............................................................................................................ 1

2. Product number ......................................................................................................... 1

3. Overview.................................................................................................................... 1

4. Related standards ..................................................................................................... 1

5. Functions ................................................................................................................... 1

5-1. Constituents ........................................................................................................... 1

5-1-1. Block diagram of design structure .................................................................... 1

5-1-2. Attached article ................................................................................................ 1

5-2. Imaging .................................................................................................................. 2

5-2-1.Imaging method................................................................................................. 2

5-2-2. Lighting source................................................................................................. 2

5-2-3.Image format ..................................................................................................... 2

5-2-4.Imaging flow ...................................................................................................... 2

5-2-5.Imaging functions .............................................................................................. 2

5-2-6. Transaction time (informative).......................................................................... 3

5-3. Contactless IC card communication ....................................................................... 3

5-4. Magnetic stripe reading (MSR)............................................................................... 3

5-5. Interface ................................................................................................................. 3

5-5-1.Host interface .................................................................................................... 3

5-5-2.Host OS............................................................................................................. 3

5-6.Intended cards ........................................................................................................ 4

5-6-1. Card length ...................................................................................................... 4

5-6-2. Card width ........................................................................................................ 4

5-6-3. Thickness of card that can be transported ....................................................... 4

5-6-4. Thickness of card that can be read the magnetic stripe and images ................ 4

5-6-5. Material ............................................................................................................ 4

5-6-6. Opacity............................................................................................................. 4

5-6-7. Distortional cards ............................................................................................. 4

5-7. Common specifications .......................................................................................... 5

5-7-1. Dimension ........................................................................................................ 5

5-7-2. Weight.............................................................................................................. 5

5-7-3. Power source ................................................................................................... 5

5-7-4. Power consumption (at the DC jack) ................................................................ 5

5-7-5. Card transfer method ....................................................................................... 5

5-7-6. Card transferring speed ................................................................................... 6

5-7-7. Indicator lamp .................................................................................................. 6

5-7-8. Gate indicator................................................................................................... 6

5-7-9. Sound noise ..................................................................................................... 6

5-7-10. Safety............................................................................................................. 6

5-7-11. USB Logo ....................................................................................................... 6

5-7-12. SG-FG connection state ................................................................................. 6

5-8. Environmental condition ......................................................................................... 7

5-8-1. Operating temperature and humidity ................................................................ 7

5-8-2. Packing condition ............................................................................................. 7

5-8-3. Vibration characteristic..................................................................................... 7

5-8-4. Mechanical shock characteristic....................................................................... 8

5-8-5. Attitude............................................................................................................. 8

5-8-7. Cable tension ................................................................................................... 8

5-8-8. Electrostatic discharge immunity...................................................................... 8

5-8-9. Electrical fast transient/burst immunity test (IEC61000-4-4) ............................ 8

5-8-10. Thermal shock................................................................................................ 9

Summary of content (20 pages)

PAGE 1
No ASR – NP – 20847 – 02 i Table of contents 1. Product name ............................................................................................................ 1 2. Product number ......................................................................................................... 1 3. Overview.................................................................................................................... 1 4. Related standards ......................................................
PAGE 2
No ASR – NP – 20847 – 01 6. Image quality ............................................................................................................. 9 6-1. 300dpi .................................................................................................................... 9 6-1-1. MTF.................................................................................................................. 9 6-1-2. Magnification of image ..............................................................
PAGE 3
No ASR – NP – 20847 – 01 Revision History Rev Date Author A B Nov 09 2010 Nov 26 2010 H.Fukasawa NEW H.Fukasawa The read error rate of a magnetic stripe is filled in. Description C Dec 28 2010 H.Fukasawa Page 13 Section “7-2. Error ratio” The disclaimer for the FCC standard agreement is added.
PAGE 4
No ASR – NP – 20847 – 02 1 /17 1. Product name ID card reader 2. Product number ISI220-0332 3. Overview This device is an ID card reader for ID1 size card that is defined by ISO/IEC 7810. This device can be also used as a scanner that captures images of both sides on the card. The device includes a molded front bezel, a case and an AC adapter module. It communicates with the host system by USB 2.0. The host software environment should be Microsoft Windows XP or Windows7.
PAGE 5
No ASR – NP – 20847 – 01 5-2. Image scanning 5-2-1.Imaging method Monochrome Contact Image Sensor (CIS). This sensor can be used as a full-color sensor by the switching method with three colors LED. 5-2-2. Lighting source R, G, B, and IR LED Each wavelength is R: 630 nm, G: 520 nm, B: 465 nm and IR: 940 nm 5-2-3.Image format BMP image format 5-2-4.Imaging flow At 300 dpi: It is possible to take picture of three kinds of images at once.
PAGE 6
No ASR – NP – 20847 – 01 At 600 dpi Front face photopic grayscale Light source Resolution Scan area Color Mixed R,G,B 600 dpi See Figure2 8 bit grayscale Back face photopic grayscale Light source Resolution Scan area Color Mixed R,G,B 600 dpi See Figure2 8 bit grayscale 5-2-6. Transaction time (informative) Measurement condition: Windows XP, CPU Celeron 1.6GHz 1GbytesUSB2.
PAGE 7
No ASR – NP – 20847 – 01 5-6.Intended cards 5-6-1. Card length 85.47~85.9mm 5-6-2. Card width 53.92~54.18mm 5-6-3. Thickness of card that can be transported 0.25~0.84mm (Within 1.32 mm when the height of emboss is contained. The emboss area is specified by ISO/IEC 7811-1) 5-6-4. Thickness of card that can be read the magnetic stripe and images 0.5~0.84mm (Within 1.32 mm when the height of emboss is contained. The emboss area is specified by ISO/IEC 7811-1) 5-6-5. Material PVC, PVAC, PET-G 5-6-6.
PAGE 8
No ASR – NP – 20847 – 01 Note) Please do not use the card like the figures below. Bent card Defective card Non-standard size Cracked, holey card Note) unavailable medium Receipt sheet, business card, Medium with clip adheres, Medium with stapler adhered, etc. 5-7. Common specifications 5-7-1. Dimension 122(W) x 113(H) x 260(D) [mm] (The projection part is excluded.) Outside drawing T10A081A01 5-7-2. Mass machine body :less than 3kg AC adapter :less than 0.5kg 5-7-3.
PAGE 9
No ASR – NP – 20847 – 5-7-6. Card transfer speed Load/Eject: 250 mm/seconds Imaging: 300dpi 83 mm/seconds 600dpi 52 mm/seconds 5-7-7. Indicator lamp POWER: Green LAMP tern on / blinking/turn off READY: Green LAMP tern on / blinking/turn off ERROR: Red LAMP tern on / blinking/turn off Each lighting mode is controlled by application program. Please refer to driver specifications ASLL-NP-20847-51 5-7-8. Gate indicator There is indicator lamp above the gate and side of the gate.
PAGE 10
No ASR – NP – 20847 – 01 5-8. Environmental condition 5-8-1. Operating condition Operating: +0 degrees C ~ 40 degrees C 30%~85% R.H no condensation Maximum wet bulb is +30 degrees C No warped card when temperature is between 0~+5 degrees C. Non operating: -10 degrees C~ 60 degrees C 20%~85% R.H No condensation Maximum wet bulb is +35 degrees C 5-8-2. Packing condition Packed: -20 degrees C ~ 60 degrees C 10%~90% R.
PAGE 11
No ASR – NP – 20847 – 01 5-8-4. Mechanical shock characteristic Without packing: Test method: Fixing at the end and drop down at another end Lift up angle: 30 degrees Lift up edge: Every 4 side Number of time: 2 times per one side Table situation: On the wood table This test is done under none operating. With packing: Test method: Free fall Lift up height: 600 mm Falling direction: 1 corner, 3 ridges and 6 faces Total falling times: 10 times There is no degradation. 5-8-5.
PAGE 12
No ASR – NP – 20847 – 01 5-8-9-1. AC power cable: +/- 1kV (between GND and AC every phase line) 5-8-9-2. USB cable: +/- 0.5 kV 5-8-10. Thermal shock -10 degrees C / +60 degrees C This test is done 10 cycles. One cycle requires one hour. The device should operate normally after returned room temperature. 6. Image quality 6-1. 300dpi 6-1-1. MTF Minimum 35%, typical 70% MTF means ratio between 0.5line pare and 3.0 line pare 6-1-2. Magnification of image Main scanning direction: Within +/- 3.
PAGE 13
No ASR – NP – 20847 – 01 2) Capture image 3) Average gray level of every block and every color 4) Calculate the difference of image data B D Gradation chart 6-1-5. Variation of projection 6-1-5-1. Integrated value of main scanning direction The difference to the integrated value around of the center is within 10%. 6-1-5-2. Computation method Main scanning direction Measurement area is without every 50 pixels from upper end and lower end. Gamma is 1.
PAGE 14
No ASR – NP – 20847 – 01 6-1-6. Gradation accuracy 6-1-6-1. The value of every block of gradation card A B C D E Average 6 18 57 111 210 Maximum 24 37 75 128 231 Minimum 0 0 38 93 189 6-1-6-2. Computation method Measurement area: 3 column of the center, Gamma is 1. Procedure: 1) Calibrate image sensor with white reference card.
PAGE 15
No ASR – NP – 20847 – 01 6-1-7. Observation of image condition It is inspected smear, regional noise and etc. For example, depend on cross talk noise, beat noise. 6-1-8. Target value of white level The target value is 229 when the white reference card is read. The white reference card is “S38A497A01”. 6-1-9. Deformation by transfer of card (extend and shorten) Long wave deformation: +/- 3 % (accuracy of card length) Momentary deformation: +/- 25 % (at 25.
PAGE 16
No ASR – NP – 20847 – 01 7. Reliability 7-1. Product life 100,000 transactions or 7 year One transaction contains follows. “Card load Transfer image scan Transfer Eject” Ambient environment is room condition. Maintenance is required. 7-2. Error ratio Within 1/10000 transaction Error means card jam, read error and false operation. Normal flat card is used for the test in room condition.
PAGE 17
No ASR – NP – 20847 – 01 8. Product Warranty 8-1. Warranty period: One year from delivery If there are any problem or it becomes malfunctioning within one year after it passes delivery incoming inspection, it should be repaired or replaced in warranty free of charge. 8-2. Repair After the above warranty period, any repair or replacement should be made as out of warranty and be charged.
PAGE 18
No Appendix: ASR – NP – 20847 – 01 15 Normal condition Temperature: +20 +/- 5 degrees C Humidity: 35 % ~ 60% R.H Attitude: Horizontal Read head Card position sensor LED + Photo Tr H8 CPU RF antenna EEPROM Motor control RF communication OSC Reading amplifier FROM Serial communication USB (high speed) Analog front end Back side CIS + LED light Face side CIS + LED light Motor Motor driver RF circuit DSP Shading and gamma compensation Pixel conversion Reading of the Mag.
PAGE 19
No ASR – NP 20847 – 01 1 (53.92~54.18) 1 1 – 1 Imaging area (85.47~85.9) Figure 2. Imaging area B: 50.8mm(600pixel) Skew = A * tan (A/B): B dimension is 50.8mm (600pixels) Reading A Medium face Figure 3-1 Image skew D C: 81.28mm(960pixel) Reading D =< 3pixel Medium face Figure 3-2 Image deformation Figure 3.
PAGE 20
No ASR – NP – 20847 – 01 NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.