Operation Manual

WIWI5GOUKI Operation Manual

Product Name: WIWI5GOUKI Trade name: NICT

Model name: RM-92NCT Manufacturer: RFLink Corp.

Product description

This product provides synchronized signals when used in pair. Units are

synchronized through 920MHz radio signal and outputs 10MHz and 1pps

(pulse per second) signal.

Figure 1 overview of purpose description

Equipment A

Equipment B

10MHz

1pps

10MHz

PAGE 1
WIWI5GOUKI Operation Manual Product Name: WIWI5GOUKI Model name: RM-92NCT Trade name: NICT Manufacturer: RFLink Corp. Product description This product provides synchronized signals when used in pair. Units are synchronized through 920MHz radio signal and outputs 10MHz and 1pps (pulse per second) signal.
PAGE 2
Appearance Connection Connect the antenna and USB powr (5V) to the Unit
PAGE 3
Method of operation Units have their own ID. Master has a unique ID for Slave to synchronize timing. After power on, red LED and green LED are flashing. The LED_1 and the LED_2 are flashing at the same time. If Master and Slave communication established, LED_2 will flash very fast and you can see almost always lighting. 1 How to reset 1.1 Slave module reset 1.1.1 Press the “Reset” button on the Slave module. 1.2 Reset Master module 1.2.1 Press “Reset” button on the Master module.
PAGE 4
need to use the connection. FCC CAUTION Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.