Installation Instructions

Wireless Button

INSTALLATION INSTRUCTIONS

Model: PR-BUTTON-W-WH

PR-BUTTON-W-BK

Tools Needed

The Wireless Button requires very few tools for installation.

A screwdriver will be required to install the button.

INSTALLATION INSTRUCTIONS

1. Carefully unpack Wireless Button.

2. Remove the bottom cover from the button.

3. Screw the bottom cover to the wall

4. Put the battery(23A 12V) in the button.

Note: Ensure that the positive and negative terminals of the battery are installed

correctly

PAGE 1
Wireless Button INSTALLATION INSTRUCTIONS Model: PR-BUTTON-W-WH PR-BUTTON-W-BK Tools Needed The Wireless Button requires very few tools for installation. A screwdriver will be required to install the button. INSTALLATION INSTRUCTIONS 1. Carefully unpack Wireless Button. 2. Remove the bottom cover from the button. 3. Screw the bottom cover to the wall 4. Put the battery(23A 12V) in the button.
PAGE 2
5. Hook the Button with battery onto the wall mounted bottom cover. 6. Press the Key to check whether the function is normal. GENERAL PRODUCT WARRANTY. Each NICOR product will be free from defect in materials and workmanship for a period of one (1) year from the date of delivery to the end-user. Powder Coat paint finish on products, other than natural aluminum or brass, will not exhibit cracking, peeling, excessive fading, or corrosion during the warranty period.
PAGE 3
reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.