Specifications

Specification
Input Voltge DC12V-16V
Operating tempera -20°C~50°C
IP Grade IP68
Control mode moblie phone+infrared direct contro
Color 16 million colors
Chasing mode
more than 200 chasing mode
Package come with led light bar, Controller, Remote control,
screws, Brackets, Bracket rubber.
Red wire: positive
White wire: data wire
Black wire: negative
X
1
Led light bar
Brackets
X
2
Brackets rubber
2
X
screws
2
X
Screw flat pad
Screw
Controller
Red wire: positive
White wire: data wire
Black wire: negative
X
1
Remote control
X
1
RF Remote Control
OFFONSET
SPEED
+
SPEED
-
MODE
-
MODE
+
AUTO
FLASH
JUMP
FADE
FLASH
ONOFF
How to build up light bar
M6X16
01
02
Bracket rubber
M6X16
03
04
Install to control panel
Install to battery positive
Install to battery negative
!
the signal will be transmitted from the controller
to the lights .
Except for the positive and negative wires, The
white
data wire
must be connected because
Remote control instructions
RF Remote Control
OFFONSET
SPEED
+
SPEED
-
MODE
-
MODE
+
AUTO
FLASH
JUMP
FADE
FLASH
ONOFF
OFF01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
17 18 19 20
21 22 23 24
01 —— Press it for three seconds to enter the setting mode and the RGB
halo will be off as well. Select one or more static colors then press
the button 05 09 or 13 to set up the mode of FLASH JUMP or FADE
and it also has memory function.
02 —— Turn on Halo ring
03 / 11 —— 1-Changing the speed of halo ring when the main white light off.
2-Changing the speed of flashing to the main white light when
it is on.
05 —— Flashing to the Halo ring.
07 —— Auto modes of halo ring
09 —— Colorful jumping of halo ring
10 ——
Static Orange
04 —— Turn off Halo ring.
2-Changing the brightness of the main white light when it is on.
06 / 08 —— 1-Changing the modes halo ring when the main white light off.
12 ——
Static White
13 ——
Colorful fading of halo ring
14 ——
Static Red
15 ——
Static Green
16 ——
Static Blue
17 ——
Static Gold
18 ——
Static Yellow
19 ——
Static Cyan
20 ——
Static Purple
21 ——
Static Pink
22 ——
Main white Flashing
23 ——
Main white light OFF
24 ——
Main white light ON
How to connet the Bluetooth
1. Scan the QR code of the control box or manual, or search
“LED LAMP”on app store to download the app.
2. Turn on your phone bluetooth, and match the app succesfully.
Open the APP show the Bluetooth connection fails.
1. please check whether your bluetooth decice in a state of
electricity.
2. please check whether your bluetooth device is within range
of a moblie phone bluetooth.
3.usually moblie phone bluetooth within 10 meters, different
moblie have different disstance .
4. please refer to the previous bluetooth device connection to
reconnect the device.
5. please uninstall the APP first, then restart your phone and
reinstall APP again!!!