FCC ID:2AD66-1262
LoRa1262-915 www.nicerf.com Catalogue 1. Overview ....................................................................................................................................................... - 3 - 2. Features ......................................................................................................................................................... - 3 - 3. Applications .............................................................................................................
LoRa1262-915 www.nicerf.com 1. Overview 2. The LoRa1262 wireless module uses Semtech's SX1262 device, which uses a high-precision TCXO crystal oscillator, ultra-low receive current and sleep current, and sensitivity of -148dBm. Built-in 64KHz crystal oscillator can wake up the microcontroller periodically under low power consumption. The module antenna switch is integrated and controlled by the chip, which saves the resources of the external MCU 3. Features Frequency Range:902.8-927.
LoRa1262-915 www.nicerf.com 6. Performance parameters (@Vcc=3.3v ANT connected to 50 ohm load) Note: Our default shipment is TCXO crystal version, please contact the related sales engineer if you want to use 10ppm industrial crystal. (Receive current: <5 mA @passive crystal oscillator) Parameter Min Typ. Max. Unit Condition Operation condition Operating voltage range 1.8 range of working temperature -40 3.3 3.7 V 85 ℃ Current consumption RX current TX current < 6.
LoRa1262-915 www.nicerf.com Transmit power range -15 Receiving sensitivity 10 dBm -133 dBm @Lora BW=500KHz_SF = 10_CR=4/5 7. Module performance index Frequency band 915MHZ Power level Current (mA) Power (dBm) Register value 9 123.5 21.2 22 8 110.5 18.03 19 7 102.2 14.67 16 6 88.7 11.79 13 5 74.2 9.15 10 4 62.9 8.52 9 3 53.6 3.5 4 2 44.2 0.53 1 1 36.8 -2.15 -2 0 31.7 -4.8 -5 NOTE:The product can be set with a power rating of 0-9.
LoRa1262-915 www.nicerf.com 8. Pin definition Pin Description 1 GND Power ground 2 MISO SPI data output 3 MOSI SPI data input 4 SCK SPI clock input 5 NSS SPI chip select input 6 NRESET 7、12、14 NC 8 GND Power ground 9 ANT 50 ohm coaxial antenna 10 GND Power ground 11 DIO3 Digital I/O, customizable 13 VCC Power input (default 3.3V) 15 DIO1 16 BUSY Reset trigger input Empty foot Digital I/O, customizable Used for status indication, depending on the chip data.
LoRa1262-915 www.nicerf.com 9. Pin comparison table The LoRa1262 module are pin compatible withLoRa1278/1276-C1.Below is the difference between this 2 modules: Module LoRa1278/1276-C1 LoRa1262 1 GND GND 2 MISO MISO 3 MOSI MOSI 4 SCK SCK 5 NSS NSS 6 NRESET NRESET 7 DIO5 NC 8 GND GND 9 ANT ANT NiceRF Wireless Technology Co., Ltd. sales@nicerf.com Rev 1.
LoRa1262-915 www.nicerf.com 10 GND GND 11 DIO3 NC 12 DIO4 NC 13 VCC VCC 14 DIO0 NC 15 DIO1 DIO1 16 DIO2 BUSY 10. Communication antenna 1)Antenna Antenna is an important part of communication system.Its performance directly affects the parameters of the communication system.The module requires an antenna impedance of 50 ohms.General purpose antenna has spring antenna and wire antenna.It is recommended to use this module in order to make it work at its best.
LoRa1262-915 www.nicerf.com 11. Mechanical Dimensions(Unit: mm) 12. Order information LoRa1262-915 Product name Frequency For example: If the customer needs 915MHz Frequency, the order no. shall be LoRa1262-915. At present, LoRa1262 products have the following models: Order model product type LoRa1262-915 Sx1262 chip, module working center frequency band is 915MHZ 13.
LoRa1262-915 www.nicerf.com 1) Power supply ripple is too large; 2) The antenna types do not match, or not properly installed; 3) The surrounding environment is harsh, strong interference sources; 4) Surrounding co-channel interference; FCC statements: This device complies with part 15 of the FCC rules.
LoRa1262-915 www.nicerf.com NiceRF Wireless Technology Co., Ltd. sales@nicerf.com Rev 1.