Instruction Manual

ManualsBrandsNgai Lik Electronics Enterprises ManualsAudio EquipmentBLUETOOTH SPEAKER SYSTEM

0 1

INSTRUCTION MANUAL

BAR SPEAKER WITH BLUETOOTH RECEPTION

& FM RADIO AND USB PORT & SD/MMC CARD SLOT

MODEL: MIB668CR

Please read following instructions prior to operating your unit.

Manufacturer of this unit follows a principle of continuous improvement and has no

responsibility for any changes that are made to the unit or any liability for these changes.

Thanks for your choice of our products.

FCC Warnings

WARNING: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Summary of content (4 pages)

PAGE 1
FCC Warnings INSTRUCTION MANUAL BAR SPEAKER WITH BLUETOOTH RECEPTION & FM RADIO AND USB PORT & SD/MMC CARD SLOT MODEL: MIB668CR WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 2
1 2 3 4 135 2 4 6 7 8 9 10 11 12 5 13 9. BLUETOOTH INDICATOR 10. REMOTE SENSOR 11. HANGING HOLES 12. FM ANTENNA 13. AC CORD 14. AUX IN JACKS 15. LINE IN JACK 2 10 11 12 13 6 7 14 15 16 17 8 18 9 19 11 14 15 MAIN UNIT 1. VOLUME - BUTTON 2. VOLUME + BUTTON 3. STANDBY BUTTON 4. MODE BUTTON 5. PAIR/PLAY/PAUSE BUTTON 6. SD/MMC CARD SLOT 7. USB PORT 8. LCD DISPLAY REMOTE CONTROL 1. SLEEP BUTTON 2. MODE BUTTON 3. CLOCK BUTTON 4. TIMER BUTTON 5. NUMERIC BUTTONS 6. VOICE BUTTON 7. EQ BUTTON 8.
PAGE 3
TIMER SETTING 1. At standby mode, press and hold the TIMER button on the remote. The hour on the display will begin blinking on the screen with the flashing timer icon “T”. 2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the hour. 3. Press the TIMER button to confirm. The minute on the display will begin blinking. 4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the minute. 5. Press the TIMER button on the remote to confirm your setting. 6.
PAGE 4
CONNECTING WITH OTHER DEVICES TROUBLE SHOOTING Symptom Radio sound distorted. No radio sound. AUDIO IN 1. Connect the Aux in jacks on the unit to audio source, for example, DVD player with an RCA cable. 2. Power on the unit and the audio device. 3. Press the MODE button repeatedly to switch to AUX mode. 4. Use the native controls on the connected audio device to begin playing music through the connected unit. LINE IN Follow steps to connect the unit to another audio device: 1.