Vaktor3800-AC Whole-home mesh wireless system USER GUIDE Thank you for purchasing Thea naw Vakiord600-AC whoa-homa mesh wireless system from NEXT Solutions®. If any af the following terns ia mismatched, missing or damaged, please contact the store ware you purchased the unit from for immediate replacement. « Vector Mesh Router,/3 nodes + 3 power adapters 110/220V + Network cable * Quick installation guide 1. Preliminary steps This advanced network device works as a Mesh Wireless Router.
Solid green Solidness Solid red The system ls working property No powers being supplied to the router or the units unplugged Good connection Fair connection: move closer ta another node Disconnected: check connection, move closer to heather nods Back pan The rear panel provides the physical connectors for power, client network devices. 1. Rests button: press and hold the button for 8-10 seconds to restore the router to its factory default settings. The router must be powered on for this function to work. B.
8. LAN parch connect your local laptop or desk‘top computers in your network to any of these RJ45 Ethernet ports. 4. BEAN: connect the supplied power adapter to this jack. 3. Hardware Installation 1. lavs each node at a high or open ares wishing the network coverage of the contact bade. Kappa your nodes away from household appliances with strong electrical Interference levels, such as TVe, microwave avenue, induction cook tops and refrigerators. They should be within 30 feet of each other. £.
4. Install the NEXXT® Wirehairs App iOS mobile operating system 41.Download the NEXXT® Windlass App on your molehill doves by searching far NEXXT® Wireless in Google Play Store or App Stars or by scanning the fallowing QR code. Then, Install the app.
2. Tap the NEXOXKT® Wireless App to start it. 3. A prompt box will pop up requesting permission to allow notifications. Tap Allow.
4. Proceed to create an account If you wart to be able to contra the Vector while you are away from home. 5. Tap the Profile icon on the upper right-hand corner. Shin 6. Tap Login and then tap Register an the upper right-hand corner.
7. Enter your mall end a password of at list 6 characters. Then click on Register. 8. Check your mall and click on the link Included In the confirmation email to Activate your ACCOUNT.
. A confirmation mall will confirm they your 11. Here ls the My Profile page where you can account registration was successful. have access to Notifications, Help and feedback, Te About Us, and Clear cache. abi oil dsM 10. Go back to tha Login page and star the small end password that you Just crested. Click an Login.
12. Tap the back button/arrow to go back to the main page. 8. Adding Voktor/notioe to your NEXXT® Wireless App/ Account. 1. Find the Elevator's default mama and password on tha label on the bottom of tha Dada. In your smartphone, go to Settings / WHF. You may have to wait 8 moment as your device detects wireless networks in range and displays them in a list.
2. Choose the default Cover's SAID and type the 3. Welcome to the Vector setup screen. Tap password on the space below. Tap Connect. Once Setup to proceed. you are connected, go back to the app.
4. It automatically detects the type of Internet connection you are using. It can always be changed to a different type of connection. To do so, tap Choose your connection and type it manually. If you do not want to change it, tap Next. 5. Io will prompt you to change the default WHF name and password. Please do so and choose something that is easy to remember, but difficult to guess. The password must be of at least 8 characters. Tap OK when you are dons.
6. le will prom you to connect to the WHE you just crested. Tap Connect. Then tap the WHF name you just created, enter the password and once connected, go back to the app.
7. To add additional nodes, go to Settings, Add 8. Adding nod Node. Tap OK. It will take you to the main interface. 1. Go to Settings, Add node.
2. If you have not done it yet, place the nodes in the appropriate locations in your houses. They should be within 30 fest (10 meters) of each other. Tap Next. 3. Plug the power adapters into the nodes and the wall outlets. Wait for about B80 seconds and then tap Next.
4. Once it prompts you to grant camera access to 5. Once completed, it confirm it has been Added. the app, tap OK. Then you can scan the GR code If you wish to add another one, tap Add; if nat, tap on the bottom of each node and nodes will be Complete to go back to the Main Menu. You can automatically added to your Verso System. add up to B nodes (each system comes with three) and 25 devices for sate system.
7. Consenting to your wireless network using 1.To connect to the router tirelessly, click on the Windows 10 wireless icon on your taskbar. 1.
3. Enter the user-defined or preassigned 4. If the connection is successful, the Connected, password, if any, and click or Next to continua soured message will coma up an the screen.
FCC Statesman This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection eglantine harmful interference ina residential installation. This squirt generates, uses, and cen radiate radio frequency energy and, if not installed and used in accordance with tha Instructions, may cause harmful Interference to radio communications.
This device shod be Installed and operated with a minimum distance inches] between the radiator and your body. Caution The FCC warns users that any changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user's authority to stoppers the equipment. This transmitter must nat be contested or operating in conjunction with any other antenna or transmittance. Operating Frequency: 24 12-2482MHz: 5150-5250MHz: 5725-5850MHz.