Specifications

ManualsBrandsNEXXT SOLUTIONS ManualsCamera & PhotoSmart Wi-Fi camera

第

页共

页

SPECIFICATION FOR APPROVAL

Product name： WIFI Antenna

Product number： UB01C75F3D1565A

CUST.Material Name： IPC_E938H2F Host wifi Antenna_FPC_ UB01C75F3D1565A

CUST.Specifications： 2.4G_Antenna_L=75mm+Connector_ROHS

CUST.Material code： 18600E9380003

Changed contents Resume:

No.

Before the change

After

Date

Version

pages

Responsible

first edition

2021-4-14

Victor

Supplier name：Dongguan Youbi Electronics Co.,Ltd

Supplier address：Building 79, New Sun Industrial City, No. 9 Xinfa Road, Lincun, Tangxia Town, Dongguan

City

Phone：0769-81777126

Fax：0769-81777126

Email：zq@ub-rf.com

(Signed by the supplier)

Responsible/Date

Audit/Date

Approve/Date

This admission book includes the following contents :(none is absent)

1. Cover

2. Parameter Specification

3. Structural dimension drawing

4. BOM

5. Packaging

6. Production process flow chart

7. Certification Test Status

Customer name:

Customer determines the result： □Qualified □Unqualified

Customer acknowledgement (please bookmark the whole acknowledgement back after confirmation)

Development Design

Engineer/Date

SQE Engineer

/Date

Head of Purchasing

Department/Date

Approved by Manager of

Development Department/Date

Summary of content (10 pages)

PAGE 1
SPECIFICATION FOR APPROVAL Product name： WIFI Antenna Product number： UB01C75F3D1565A CUST.Material Name： CUST.Specifications： IPC_E938H2F Host wifi Antenna_FPC_ UB01C75F3D1565A 2.4G_Antenna_L=75mm+Connector_ROHS CUST.Material code： 18600E9380003 Changed contents Resume: No. Before the change After Date Version pages Responsible 0 first edition first edition 2021-4-14 A0 10 Victor Supplier name：Dongguan Youbi Electronics Co.
PAGE 2
.Parameter Specification 2.1. Electrical performance parameter No. Parameter specification 2400-2500MHz Test condition 1 Project Frequency(MHZ) 2 Gain ≥2.5dBi ，≤3.5dBi Anechoic chamber 3 Efficiency ≥50%，≤100% 4 Impedance（Ω） 50 Network analyzer 2.2. Mechanical performance parameters No. Project Parameter specification 1 Cable length 75±3(mm) 2 FPC length 24.9±0.5(mm) 3 FPC width 21±0.5(mm) 4 FPC thickness 0.2±0.
PAGE 3
Test conditions: 1. Drop the 6 sides of the carton (Figure 1) Figure 1 2. The distance between the product and the floor steel plate is 80 CM(Figure 2) 4 Drop test 80CM Figure 2 Experiment method： 1. First, fix the packing box to be tested on the product bracket to fix and clamp the test sample. The clamping force should be appropriate to avoid pinching the tested sample. 2. Adjust the drop height 80CM. 3. First turn on the main power switch and connect the trachea. 4.
PAGE 4
3.
PAGE 5
4. BOM (Bill of Materials) No. Part material Material Specifications/Models Brand Supplier Dosage FPC PIT=0.5Mil，Copper foil thickness 0.5oz 24.9*21*0.2mm \ XG 1PCS 2 Connector Phosphor copper plating 1.13 MHF-1-Plug \ CM 1PCS 3 Cable FEP/Tin plated copper RF1.13 \ SY 1PCS 4 PE Bag PE 150*150*0.06mm \ TL 1/200PCS 5 Carton \ 325*325*200*6mm \ JLD / 1 【Supplier BOM code rules】: General process coding rules for finished products: UB + 01 + C +75+ F + 3D + 1565 + A ① ②
PAGE 6
5. Packaging 5.1. Packaging pictures： 1. Photos or pictures of single material packaging Remark： 2. Photos or pictures of the single layer of the inner packaging Remark：200PCS / Bag 3. Photos or pictures of the outer packaging Remark： 5.2. Material packaging information table: No. Material name Material Specifications Material 1 WIFI Antenna 24.9*21 *0.
PAGE 7
6. Production process flow chart 7.
PAGE 8
.S Parameter Frequency (MHz) Return Loss (dB) VSWR 2400 -15.57 1.39 2450 -18.5 1.26 2500 -13.65 1.52 * Voltage Standing Wave Ratio(VSWR) Return Loss(RL) RL=20*log10[(VSWR+1)/(VSWR-1) 4. Efficiency and Gain Frequency (MHz) 2400 2450 2500 Efficiency (%) 63.7 65.4 62.5 Gain (dBi) 2.96 3.23 3.
PAGE 9
5.
PAGE 10
5-2 Antenna 2D Radiation Pattern Vertical Plane Phi 0 2D Phi 90 2D Horizontal Plane Theta 90 2D 第 10 页共 10 页