Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Integrated Wireless IP Camera with IR cut-off filter INTRODUCTION Thank you for purchasing the Nexxt Solutions XPY 330 Camera. Featuring an infrared cut-off filter, our new XPY is an integrated wireless IP Camera solution that combines high quality digital video with network connectivity and a powerful web server to bring a clear picture to your desktop or mobile phone from anywhere on your local network or over the Internet.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter BEFORE YOU BEGIN • This camera is intended for indoor use only. the supplied power adaptor to connect the camera to the AC mains (5.0V DC, 1.5A). The warranty does not cover any damage caused by applying the wrong voltage. • Never attempt to disassemble the unit. The warranty does not cover damages as a result of tampering with, or the improper alteration of the device.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter FEATURES • The camera combines a high-sensitivity 1/4 CMOS image sensor, an advanced IR cut-off filter with a powerful wireless web server in order to capture lifelike images from anywhere, and to transmit them instantly on your local network or over the internet. • Can be used on WiFi or wired networks. • It uses the H.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter quick configuration changes via the Settings menu. with smartphones enables remote surveillance and camera control in real-time from any location. • Supports image snapshots and image forwarding via email and FTP upload. NOTES ON WINDOWS AND MAC COMPATIBILITY: - IP camera setup should be completed on a Windows PC only using Internet Explorer.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter CAMERA INSTALLATION Our WiFi Pan and Tilt Camera can be set up in minutes for instant monitoring and live viewing on your Windows computer and 3G Smartphone - all via your wireless network router or switch. For optional recording capabilities, simply install the IP Super Client software in your Windows PC and configure it according to your particular needs. 1. Begin by screwing the bracket to the camera.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Step 2: Connect the other end of the network cable to the Ethernet switch, router or IP sharing device. Step 3: Plug the power cable to the wall outlet and turn on the device. 3. The camera can also be connected to a computer directly. Step 1: Connect one end of the network cable to RJ45 interface of IP camera Step 2: Plug the power adapter to the DC jack of the IP camera and turn it on. Direct Connect IP Camera Computer 4.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Please note that if you are using the camera on a wireless network, you will need to configure the camera for wired use, prior to configuring wireless settings in the device (later described in this manual). SYSTEM REQUIREMENTS Minimum Hardware Configuration CPU: Pentium 1.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Introduction The IP camera Super Client is an easy-to-use software designed for surveillance applications with multiple cameras. This software includes PT controls, recording, alarm notifications, in addition to a central management feature that allows the administration, configuration and access control settings for each individual device. Functions: *Supports up to 81-video monitoring in one screen.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Adding devices After installing the client software, we need to add the devices. When running the program, the device list on the right of the main interface is empty; there is a guide to show you how to add the devices. Click the right button to choose “add new device” or “add new group”. This program supports a multi-level structure to manage existing devices.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter 300-Series Image: 330-Series Image: 11
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Name: name assigned to the camera, used to distinguish it from other devices connected. This name will be displayed on the camera list. Basic information: the basic information used for connecting the camera, such as connection method, username, password, PT protocol, etc. Device parameters: set size of the image and frame rate. Not all series have this option available. Alarm: This menu contains all the alarm-related settings.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Forwarding Server: It provides access to videos by retrieving the files from the server. This requires the setup of server settings. This mode cannot support PT control. Support P2P: Supports P2P technology. This mode cannot support PT Control.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter 330-Series Image: This menu is used to quickly set the camera parameters. Not all models have this function. Click the Get button to obtain the current settings. Click Apply or Set depending on the model to save your modifications. Alarm It includes all the alarm-related settings. Please refer to the Alarm section for more details. Record It includes all the recording-related settings.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Additional information It is used to enter personal-related information, such as user name, telephone, address, and memo. Introduction to the main window Below is the main window of the client software. Device Tree Components: this tree provides a visual representation of all detected devices. Supports multi-level structure from which users can connect or disconnect devices in a particular group.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Pan and Tilt feature of the camera. Main Menu: Allows the user to connect or disconnect all the devices, open the history manager, system setup, and other functions. PT Control This feature is available based on the model of the camera. If your camera supports the Pan and Tilt feature, enable it using the client software. Once enabled, the movement of the camera can be controlled with the buttons in the PT control area.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter To set record function, right click the device and choose Camera Options or click the Camera/ Group Options button. Next, go to Alarm tab. Enable record: when selecting this option, the recording function will be enabled. Continuous recording: the client software will record all the time. Scheduled recording: users can appoint a certain period in which the client will start recording.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Alarm The Client software supports various kinds of alarm triggers, alarm events, and can be used to set an alarm schedule. Select the camera in the display area or from the device list, click the right button to choose Camera Options, or click the Camera/Group Options button. Next, go to Alarm tab. Enable alarm: In order to use the alarm function, you must check this option.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter includes the capturing of audio and the video recording time. Schedule trigger: Sets the schedule during which alarm can be triggered. Days: specify the day(s) of the week the alarm will be triggered. Time: sets a starting and ending time for the alarm. Trigger mode: specifies the type of event that would trigger an alarm. It currently supports motion detection and alarm sensor input (depending on the model).
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Sound: when an alarm is triggered, the program will play a sound on the computer to frighten the intruder. Sounds can be customized. You can choose the sound from the list in the program. Select the sound and click OK to save the setting. You can also choose other sound files from your local disk drive.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Email: when the alarm goes off, the program will send an email acknowledgement with the pictures or video recording attached. Attachment: the user can choose to send emails with or without attachments, or with pictures or videos. However, when choosing to send an attachment, the user needs to have the live recording function enabled first. Receiver: it is the email address to which the alarm acknowledgement will be sent to.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter FTP Uploading: when the alarm is triggered, the program will upload the snapshots to the FTP server. Upload file: three options are available: picture only, video only, or both picture and video. FTP host address: account information required to access the File Transfer Protocol host. FTP port: the default is set to 21. User name: the user name used in the FTP login window. Password: the FTP password used in the login window.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Dialing: when the alarm is triggered, the program will dial the assigned telephone number automatically using the PC’s modem. This service requires a modem to be installed on the PC which supports dialing functions. Dialing device: choose the modem from the list that supports the dialing feature. Number to be dialed: the number which will be dialed once the alarm is triggered. Test: Click Test to make sure this setting is functional.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter This service requires an SMS modem to be installed on the PC. SMS modem port: the serial port number which is attributed to the SMS modem. Receiving phone number: the enabled-SMS land line or mobile phone number which will receive the incoming message when the alarm is triggered. SMS interval (in minutes): defines the time interval in minutes that the SMS alerts will go off while the alarm is active.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter http://www.skype.com. Send Skype Message: this option sends a text “message” to the designated Skype account. Send SMS: this option sends a text “message” to the designated phone. Please note that this feature requires a Skype account balance. To know more about using Skype to send SMS, recharge information, etc., please visit the official Skype website.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Run once: this option will execute the command only when the alarm goes off for the first time, with no further action after that. URL Link: when the alarm is triggered, the program will open the assigned URL. Usually, this is used to inform other systems about the alert.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter When this feature is enabled, the program will always request authentication from users. By default, the admin account enjoys full administrator privileges. This account can never be deleted; however, its password can be changed. Add operator: click the Add button and the dialogue box below will appear.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Once you type in the account information and assign the corresponding permissions, click OK to save it. Privileges to add or remove accounts mean that the account operator can include or delete its dependant users. This takes effect only after logging in with this account. Delete: the currently selected operator will be erased. Modify authority: it changes the permission level assigned to this operator.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter After selecting the desired device and date, click the Find button. Records publisher Users can remotely view videos and alarm logs using the records publishing tool from the client. Click the Setup menu on the bottom right corner of the dialog box, and choose Record History Web Publisher. The following window will be displayed, as shown below.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter By default, this function is not enabled. You must first select the Enable History Publisher option and click the Apply button to enable this feature. The LAN IP address will be displayed at this point. Users can directly view records in the LAN if the PC has a fixed IP address. Records can also be accessed by entering the IP address and adding the port number.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Users can set a password for controlled access permissions. The Web server port is the port provided for remote visit. Normally, this value does not need to be changed, but if that port is being occupied by other devices, users can assign a different port number within the 1 ~ 65535 range. When entering the URL in IE address box, a page like the one below this will be displayed.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter A list containing all the devices with recorded video files will appear. Next, click on any specific device, and a list of recordings identified with the date will be displayed at this stage. When the operator chooses a certain date, the page below will pop up on the screen. The list contains the files recorded that day. When you click on a specific file, it will play the video.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter During playback, the user can rewind or forward the video, take a snapshot or invert the recorded images. The process to remotely access alarm records is the same as with video records. Registration Go to the Setup menu and select Registration. Enter the registration name and code, and click Register to complete the process. The registration name and code can be found on the supplied CD-ROM.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Wizard mode: this is for first time installation of the IP camera or if the IP camera is not very familiar to the user. This is a step-by-step process for successfully detecting and installing the IP camera. Advanced mode: this is to be used to manually set network parameters, such as the IP address. This is suitable for users who are familiar with the installation of the IP camera.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter If network cable and power supply are correctly connected, the device type, name and IP address will be shown in the device list. (Otherwise, please confirm whether the power supply and network cable are functional). In the interface above, the configuration information of the current computer is listed on the left side; the network configuration information of the selected camera is listed on the right side.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter for the first time, please click Update, so that IP address of the IP camera, gateway and DNS can be synchronous with the PC. 3.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Input the authorized user name and password. The default user name of the camera is admin, and the password is left blank. After successful authentication, the following page will be shown: When you visit the IP camera for the first time, it will make you choose the corresponding language automatically according to the language version of the current web browser; other languages can also be selected.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter the QuickTime media player interface for FireFox, Safari, and Google web browser. iPod/iPhone/iPad user interface: this mode is designed specifically for Apple mobile devices, such as iPod, iPhone, and iPad. This can only be used for monitoring, because it does not have the capability for setting up the IP camera. No Plug-In mode: this mode is mainly used for most smart phones.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter After logging into the device, the monitoring image will be displayed on the left side of the screen. The panel where users can implement the basic parameters to operate the device will be shown on the right side of the frame. Pan/Tilt Direction control arrows : click the arrow keys to aim the lens in the direction you wish to look. The camera returns to the center after rotating one full circle.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Mode: this value is set according to the frequency of the fluorescent light. If the frequency does not match the frequency of the light, markings will be seen across the screen. Frame rate: the maximum video frame rate is 25fps. If the network broadband is low, you can choose a lower frame rate. Brightness and contrast ratio: use it to adjust the brightness and contrast ratio of the screen.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter IP CAMERA SETTINGS Click the device button located on the right hand corner of the control panel, to enter into the device interface. Camera Information It displays the device ID, firmware, embedded Web UI version, SD card size, IP address along with other basic information pertaining to the camera.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter device uses this time as the naming scheme for the saved recorded files on the PC or SD card. If you synchronize time with the NTP server, please make sure the IP camera’s gateway and DNS server parameter are valid and correct. Users Settings Set the IP camera’s access accounts and passwords. The system allows the configuration of up to eight user accounts. RTSP settings Define the RTSP access.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Multi-Camera Settings When you access the current IP camera, you can also watch additional devices using the same interface. The interface to add other cameras is illustrated below. First click on the rows you want to add, e.g. the 2nd.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter When you finish filling out all the information, click the add button below to save all these configuration values in the camera. Note: multi- camera view is currently supported only by IE. Basic Network Settings Use this menu to set the IP camera’s IP Address, subnet mask address, gateway, DNS server, HTTP port, and RTSP port if settings are not being acquired through a DHCP server.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter your settings. Since the camera will restart at this time, the network cable must be unplugged. After rebooting, you can access the camera again using the correct device. PPPoE Settings This is used to set up the Point-to-Point Protocol over Ethernet (PPPoE) parameters.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter means of dial-up Internet for instance, you can use the camera’s own DDNS. The IP camera supports two DDNS methods, one is provided by the factory, while the second one is generated by a third party’s DDNS system, like DynDns. When choosing the DDNS assigned by the factory, users can directly apply such parameters without further configuration needed.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter When users check “show date timestamp on video”, a timestamp will be added in the bottom right corner of recorded footage. Mail Service Settings The mail service is mainly used to send email notifications in case an alarm is triggered. The user can set the program to send an email every time the alarm goes off.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter FTP Service Settings The FTP server is mainly used for uploading live pictures in case an alarm is triggered. FTP server: the address of the FTP server. FTP port: the port used for the FTP server. Usually, this is set to 21. FTP user and password: the user name and password of the FTP site. FTP upload folder: pictures are saved in the subdirectory of the FTP server.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Alarm Service Settings This is used to set the alarm functions on the camera. The XP 330 supports motion detection and external alarm inputs. Motion detection means that the IP camera will sense movement and immediately it will trigger an alarm to alert about such an event.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter up on a weekly basis, within a 24 hour-time frame. By selecting the scheduler you will be enabling the alarm. SD Card Record This is used to set certain parameters of the SD card recording. Loop rewrite: overwrites old content. Record for external input alarm: begins recording when the alarm is triggered from an external input device. Motion activated recording: starts recording when the alarm is triggered by motion.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter PT settings This is used to set the pan and tilt parameters and the signaling lamp. When this light is enabled, the green LED of camera’s head will flash. When the IP camera is powered on, it will rotate by itself and stop at the center. Every time the IP camera restarts, it will turn to its center position automatically. Rotation towards the center is mainly used for positioning.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter MOBILE ACCESS To begin with, the mobile phone you must have internet access and be connected to the wireless LAN if attempting to login internally. If attempting to access externally, you must ensure to type in the correct DDNS address on the web browser or have FTP forwarding function enabled in the router in order to login via the camera’s IP address.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Next, taking the Opera mini 4 Version on Windows Mobile as an example, we are going to present the whole procedure. 1. Enter access address http://demo.ipcam.so in the browser address bar; the following interface will appear: 2. Once you input the Username and Password of the camera, the following interface will pop up. There are four login options.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Monitoring page description: Function of monitoring page keys: Update: it is used to refresh the page. If the monitor picture freezes, you may press this key to update the contents of the page. Up, down, left, and right: they are used to control the direction of the IP camera. This only applies to the P/T camera models. Stop: stops the camera’s pan and tilt movement.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter port forwarding setup for illustration (we recommend to use our Nexxt Solutions routers for best results). For illustrative purposes, the router’s default access address is 192.168.0.1, the IP camera’s access address is 192.168.0.100, and the default access port is 81. 1. First log in to the router’s web administration interface (type 192.168.0.1 on your web browser). 2.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter 4. Under Service Port and Internal Port field, input the incoming port for the IP camera (in this example, it will be 81). In the IP Address field, type the camera’s IP address (in this example, it will be 192.168.0.100). Under the Protocol drop-down menu, you have the option to set it to UDP, TCP, or ALL. We recommend setting it to ALL, but you can set the option that best fits your configuration.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter Common router default access addresses: 1.Nexxt Solutions router’s default access address is 192.168.0.1 2.DLINK router’s default access address is 192.168.0.1 3.Linksys router’s default access address is 192.168.1.1 4.3com router’s default access address is 192.168.2.1 5.Microsoft router’s default access address is 192.168.2.1 6.Netgear router’s default access address is 192.168.1.1 7.Asus router’s default access address is 192.168.1.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter 3. If a firewall is installed in your network or computer, ensure this is not blocking inbound connections to the camera and/or port. Question: Does the 330 series allow users to browse dynamic video through a mobile phone? Answer: Yes, it does. The 330 series allows for dynamic video viewing through most smart mobile phones.
Nexxt Solutions - Integrated Wireless IP Camera with IR Cut-Off Filter SPECIFICATIONS Model AILPT324U5 Specifications Camera Image sensor 1/4 color CMOS Lens 4 mm Infrared LED 10 pcs Pixels 300,000 Filter infrared cut-off filter (ICR) to ensure lifelike daytime color and sensitive night time performance Night vision range 15 m AWS/AGC/AES exposure Auto Audio Video Pan/Tilt Network Alarm General Compression format Supports H264 and M’JPED dual compression Minimum illumination 0.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.