Nexxt Solutions - Integrated Wireless IP Camera Integrated Wireless IP Camera INTRODUCTION Thank you for purchasing the Nexxt Solutions XPY 320 Camera. Our new XPY is an integrated wireless IP Camera solution that combines high quality digital video camera with network connectivity and a powerful web server to bring a clear picture to your desktop or mobile phone from anywhere on your local network or over the Internet.
Nexxt Solutions - Integrated Wireless IP Camera BEFORE YOU BEGIN • This camera is intended for indoor use only. the supplied power adaptor to connect the camera to the AC mains (5.0V DC, 1.5A). The warranty does not cover any damage caused by applying the wrong voltage. • Never attempt to disassemble the unit. The warranty does not cover damages as a result of tampering with, or the improper alteration of the device. • Do not point the camera at the sun or at any other strong light source.
Nexxt Solutions - Integrated Wireless IP Camera FEATURES • The camera combines a high-sensitivity 1/4 CMOS image sensor with a powerful wireless web server in order to capture clear images from anywhere, and to transmit them instantly on your local network or over the internet. • Can be used on WiFi or wired networks. • Selectable image resolution of 640x480 and 320x240 pixels. • The system can be expanded at any time by adding multiple cameras.
Nexxt Solutions - Integrated Wireless IP Camera Mac users are only able to: - view live images via compatible web browsers including Safari, Firefox and Chrome but are limited to viewing one camera at a time. - take and save snapshot images via the web browser interface.
Nexxt Solutions - Integrated Wireless IP Camera 1.Begin by screwing the bracket to the camera. Connect the camera using the power adaptor that comes with the product. 2.Using a standard Ethernet network cable, connect the camera to your network. The camera can either be connected to a router/ switch or directly to a PC with an Ethernet network cable. We recommend setting up the camera on your network using a wired connection prior to using the device in a wireless configuration. 3.
Nexxt Solutions - Integrated Wireless IP Camera Please note that if you are using the camera on a wireless network, you will need to configure the camera for wired use, prior to configuring wireless settings in the device (later described in this manual). Accessing the IP camera Using the IP Super Client Software Note: The IP network camera is designed to work in a local area network (LAN) or over the internet. For the first method, we highly recommend using the software included in the CD.
Nexxt Solutions - Integrated Wireless IP Camera *Supports audio, SMS, SMS modem, dialing, email, FTP and alarm output switch. *Supports inquiries, browsing of alarm and operation log records. *Supports multi-level access management. *Supports remote login to check records and alarm records. Adding devices After installing the client software, we need to add the devices.
Nexxt Solutions - Integrated Wireless IP Camera Now, let’s take the 300-series and 330-series as examples to introduce the adding device option.
Nexxt Solutions - Integrated Wireless IP Camera 330-Series Image: Name: name assigned to the camera, used to distinguish it from other devices connected. This name will be displayed on the camera list. Basic information: the basic information used for connecting the camera, such as connection method, username, password, PT protocol, etc. Device parameters: set size of the image and frame rate. Not all series have this option available.
Nexxt Solutions - Integrated Wireless IP Camera Alarm: This menu contains all the alarm-related settings. Record: This menu contains all recording related settings. Connection Information IP/Domain mode: This mode provides LAN access to the camera, or to a camera which has a domain or fixed IP. To use this mode, an incoming port should be assigned. By default, this port is set to 81. Username/Password: The username and password used to access the camera.
Nexxt Solutions - Integrated Wireless IP Camera This menu is used to quickly set the camera parameters. Not all models have this function. Click the Get button to obtain the current settings. Click Apply or Set depending on the model to save your modifications. Alarm It includes all the alarm-related settings. Please refer to the Alarm section for more details. Record It includes all the recording-related settings. Please refer to the Recording section for more details.
Nexxt Solutions - Integrated Wireless IP Camera Freq./Time setup It is used to schedule a timing action to change the lightning frequency. Additional information It is used to enter personal-related information, such as user name, telephone, address, and memo. Introduction to the main window Below is the main window of the client software. Device Tree Components: this tree provides a visual representation of all detected devices.
Nexxt Solutions - Integrated Wireless IP Camera Display Control Panel: users can choose between full view in a single screen or a split screen configuration of 4, 9,16,25,36,49, 64 or 81 frames. PT Control Panel: direction buttons for controlling the Pan and Tilt feature of the camera. Main Menu: allows the user to connect or disconnect all the devices, open the history manager, system setup, and other functions. PT Control This feature is available based on the model of the camera.
Nexxt Solutions - Integrated Wireless IP Camera the parameter of how long to keep the files. For the IP camera with MJPEG format, the client software can compress the saved data into MPEG4 format, which can be used to reduce the usage of space on the disk. To set record function, right click the device and choose Camera Options or click the Camera/ Group Options button. Next, go to Alarm tab. Enable record: when selecting this option, the recording function will be enabled.
Nexxt Solutions - Integrated Wireless IP Camera Scheduled recording: users can appoint a certain period in which the client will start recording. Alarm The Client software supports various kinds of alarm triggers, alarm events, and can be used to set an alarm schedule. Select the camera in the display area or from the device list, click the right button to choose Camera Options, or click the Camera/Group Options button. Next, go to Alarm tab.
Nexxt Solutions - Integrated Wireless IP Camera Enable alarm: In order to use the alarm function, you must check this option. Alarm group: It is a user-defined name to identify and link cameras belonging to the same group. Alarm lasting time: The period of time the software will keep the alarm active. That will have the same duration as the event causing the alarm, which includes the capturing of audio and the video recording time. Schedule trigger: Sets the schedule during which alarm can be triggered.
Nexxt Solutions - Integrated Wireless IP Camera Days: specify the day(s) of the week the alarm will be triggered. Time: sets a starting and ending time for the alarm. Trigger mode: specifies the type of event that would trigger an alarm. It currently supports motion detection and alarm sensor input (depending on the model). An action on alarm defines how the software will respond once the alert is triggered.
Nexxt Solutions - Integrated Wireless IP Camera program. Select the sound and click OK to save the setting. You can also choose other sound files from your local disk drive. In other words, you can record “Catch the thief” in a file, save it and then select the sound file by clicking the folder button to add the file you want. If you want to read a text on alarm, you can check the “Speech” icon and edit the contents to be read.
Nexxt Solutions - Integrated Wireless IP Camera Email: when the alarm goes off, the program will send an email acknowledgement with the pictures or video recording attached. Attachment: the user can choose to send emails with or without attachments, or with pictures or videos. However, when choosing to send an attachment, the user needs to have the live recording function enabled first. Receiver: it is the email address to which the alarm acknowledgement will be sent to.