Nexxt Solutions - Integrated Wireless IP Camera FTP Uploading: when the alarm is triggered, the program will upload the snapshots to the FTP server. Upload file: three options are available: picture only, video only, or both picture and video. FTP host address: account information required to access the File Transfer Protocol host. FTP port: the default is set to 21. User name: the user name used in the FTP login window. Password: the FTP password used in the login window.
Nexxt Solutions - Integrated Wireless IP Camera supports the dialing feature. Number to be dialed: the number which will be dialed once the alarm is triggered. Test: Click Test to make sure this setting is functional. SMS modem: when an alarm is triggered, the program will send a Short Message Service transmission to the assigned phone through the modem. This service requires an SMS modem to be installed on the PC. SMS modem port: the serial port number which is attributed to the SMS modem.
Nexxt Solutions - Integrated Wireless IP Camera Skype: when an alarm is triggered, the program will use Skype to send Skype messages, text messages, Skype calls and call a mobile phone. This feature requires for Skype to be installed on your computer. When the alarm is triggered, the program will call or open the Skype interface, so that it can execute the actions mentioned above. If Skype is not running, the program will automatically start Skype. You can download Skype by going to http://www.skype.com.
Nexxt Solutions - Integrated Wireless IP Camera Test: click Test to make sure this setting is functional. Application: when the alarm is triggered, the program will execute the selected program. Program: it defines the path for the .exe file belonging to the selected program. Run parameter: the run parameter values should be entered in this box. Run once: this option will execute the command only when the alarm goes off for the first time, with no further action after that.
Nexxt Solutions - Integrated Wireless IP Camera URL Link: when the alarm is triggered, the program will open the assigned URL. Usually, this is used to inform other systems about the alert. User Account Administration The Client supports a multi-level management system, whereby different users are granted specific privileges and passwords for controlled access. This function is not enabled by default.
Nexxt Solutions - Integrated Wireless IP Camera When this feature is enabled, the program will always request authentication from users. By default, the admin account enjoys full administrator privileges. This account can never be deleted; however, its password can be changed. Add operator: click the Add button and the dialogue box below will appear. Once you type in the account information and assign the corresponding permissions, click OK to save it.
Nexxt Solutions - Integrated Wireless IP Camera Delete: the currently selected operator will be erased. Modify authority: it changes the permission level assigned to this operator. Change password: it allows the user to modify the existing password. Log manager The client software has log management function. It will keep records of user operation and device connection information. Click the Setup menu button on the bottom right corner of the dialog box, and then choose Log Management to open the window.
Nexxt Solutions - Integrated Wireless IP Camera After selecting the desired device and date, click the Find button. Records publisher Users can remotely view videos and alarm logs using the records publishing tool from the client. Click the Setup menu on the bottom right corner of the dialog box, and choose Record History Web Publisher. The following window will be displayed, as shown below.
Nexxt Solutions - Integrated Wireless IP Camera By default, this function is not enabled. You must first select the Enable History Publisher option and click the Apply button to enable this feature. The LAN IP address will be displayed at this point. Users can directly view records in the LAN if the PC has a fixed IP address. Records can also be accessed by entering the IP address and adding the port number.
Nexxt Solutions - Integrated Wireless IP Camera Users can set a password for controlled access permissions. The Web server port is the port provided for remote visit. Normally, this value does not need to be changed, but if that port is being occupied by other devices, users can assign a different port number within the 1 ~ 65535 range. When entering the URL in IE address box, a page like the one below this will be displayed.
Nexxt Solutions - Integrated Wireless IP Camera A list containing all the devices with recorded video files will appear. Next, click on any specific device, and a list of recordings identified with the date will be displayed at this stage. When the operator chooses a certain date, the page below will pop up on the screen. The list contains the files recorded that day. When you click on a specific file, it will play the video.
Nexxt Solutions - Integrated Wireless IP Camera During playback, the user can rewind or forward the video, take a snapshot or invert the recorded images. The process to remotely access alarm records is the same as with video records. Registration Go to the Setup menu and select Registration. Enter the registration name and code, and click Register to complete the process. The registration name and code can be found on the supplied CD-ROM. Web browser 1.
Nexxt Solutions - Integrated Wireless IP Camera When done, the camera login page will be displayed on the screen. 2. Click “sign in” to enter your account and password on the camera login page, as shown below. By default, the administrator’s username is “admin” and the password is left blank. You can log on to this page as an Administrator, Operator or Visitor. Access privileges will be assigned on the web browser interface based on the user.
Nexxt Solutions - Integrated Wireless IP Camera the user will have full access to controls, critical functions and to the advanced configuration of the camera. 3. If you are using a PC, follow the top link for IE Browsers. This will activate ActiveX which allows access to additional features of the user interface. If you are a Mac user, you can view the camera via a second link, Server Push Mode.
Nexxt Solutions - Integrated Wireless IP Camera Device Status Indicates the number of cameras connected on the network. For Viewer When logged in as visitor, the user will be able to view the main monitoring page for all the enabled cameras on the network. This window allows you to choose between Full View or Split Screen configurations. Select the icons according to the view preferred. For example: select for Full Screen, for Quad view or for Multi Split Screen.
Nexxt Solutions - Integrated Wireless IP Camera Audio switch Click to enable the audio stream from the camera. The icon will change to . In order to be able to listen to the sound around the camera, you need to have an earphone or speaker connected to the computer, and the microphone function enabled. Click this icon once again when you want to disable this feature. Record Click on the icon to begin video recording. The camera will create an AVI file and save it in the folder you specified.
Nexxt Solutions - Integrated Wireless IP Camera access to the Operator Page, and to certain parameters associated with the operation of the camera. Pan/Tilt Direction control arrows : click the arrow keys to aim the lens in the direction you wish to look. 1. Patrol selection Vertical patrol Horizontal patrol Stop patrol Switch alarm input on input off. Switch alarm Mirror Click the icons to see the horizontal or vertical mirror image.
Nexxt Solutions - Integrated Wireless IP Camera right mouse button on the image to enable the PT function. A green arrow on the video image will be displayed. Use the left button of the mouse to aim the camera in the direction of the target. If you want to cancel, double-click on the right mouse button once again. Default All Click to return the settings to their factory default values.
Nexxt Solutions - Integrated Wireless IP Camera UPnP Settings - Access this page to find out if the UPnP (Universal Plug and Play) is working correctly on your computer. Upgrade Device Firmware - Upgrade the camera’s Firmware and device embedded web UI software on this page. Restore Factory Settings - Restores the original settings of the device. Reboot Device - Reboots the device. Multi-Device Settings In the Multi Device Settings page, the user can visualize all devices detected in the LAN.
Nexxt Solutions - Integrated Wireless IP Camera To add cameras to the LAN Click ‘The 2nd Device’ and double click the IP camera from the ‘Device List in LAN’. The Alias, Host and HTTP Port will fill in automatically. Enter the correct User Name and Password then click ‘Add’. Repeat the same procedure to add additional cameras. To add cameras to the Internet First make sure the camera added can be accessed on the Internet with the IP address or DDNS domain. (for example: http://XXX.XXX.XXX.