Globehopper Crossmodal 3.0 User Manual Technical Data Installation Guide Certifications Doc. Nr.: Version: Status: Classification: © 2021 20200511001 1.9 APPROVED PUBLIC Hardstrasse 201 8005 Zürich, Switzerland Telephone: +41 44 275 51 51 Email: info@nexxiot.com www.nexxiot.
Globehopper Crossmodal 3.0 - User Manual Table of Contents 1 2 3 4 5 7 8 Revision History ........................................................................................................................................................................................................................ 2 Technical Data .........................................................................................................................................................................................
Globehopper Crossmodal 3.0 - User Manual 2 Technical Data Product Globehopper Crossmodal 3.0 Ex ID AX.3A Physical Environmental Energy Size 360 mm x 111 mm x 53 mm Weight 2.55 kg Mounting hole spacing 330 mm Operating temperature (EN 50155, Class TX) -35 °C … +50 °C; Electronics operational up to +85 °C ATEX ambient temperature (EN 60079-0) -40 °C … +60 °C Altitude 2000 m / 6562 feet Ingress Protection IP66/IP67, IPx9k Battery type NiMH Nominal battery voltage 2.
Globehopper Crossmodal 3.0 - User Manual 3 Certifications Environment: RoHS WEEE IEC 61373 Category 1, Class A (Vibrations and shocks for rail) IEC 60529 (IP66/IP67) ISO 20653 (IPx9k) EN 50155 EN 50125-1 ATEX and IECEx: ATEX Certificate Number EPT 20 ATEX 4088 IECEx Certificate Number EUT 20.
Globehopper Crossmodal 3.0 - User Manual 4 Important FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Globehopper Crossmodal 3.0 - User Manual 5 Product Information 5.1 Safety Notice 1. 2. 3. 4. 5.2 Do not drop the device. Do not open the device. Do not expose device to conditions other than those in chapter “Technical Data”. Warning: Device contains a NiMH. Danger of fire if punctured, crushed or otherwise forcefully damaged, exposed to heat above the values given in the chapter “Technical Data”. Device Identification 1 13 12 2 3 11 10 9 8 7 6 4 5 Explanation of the label elements: 1.
Globehopper Crossmodal 3.0 - User Manual a. b. 10. 11. 12. 13. 5.3 II: group of equipment. Group II refers to equipment not used in mining. 2 GD: In presence of potentially explosive atmospheres of gas (G) and/or dust (D) the category 2 is suitable to be installed in zone 1 and/or zone 21; the process connection of the equipment is suitable to be installed in zone 1 ATEX Classification of the device within specific areas a.
Globehopper Crossmodal 3.0 - User Manual 5.4 Installation Instructions It is not permitted to perform an installation of the Globehopper Crossmodal device inside a hazardous area. If the installation of the Nexxiot device is performed outside of a Hazardous area, then there are no special safety considerations or precautions required.
Globehopper Crossmodal 3.0 - User Manual 6 Installation and Mounting Guide Recommended Installation Equipment (The equipment is not provided together with the Globehopper Crossmodal when delivered): • Drill with 6.5 mm drill bit • Riveting machine Rivdom Two2 • 2 pcs. 6.4 mm (1/4 inch) rivets Monobolt 02711-00824; 316 grade/A4 Installation of the device must only be done by appropriately qualified personnel and must be carried out according to IEC 60079-14. 6.
Globehopper Crossmodal 3.0 - User Manual Installation steps: 1. Take the equipment and the Globehopper Crossmodal to the place of installation. 6.2 2. To avoid mistakes, the Globehopper Crossmodal needs to be fixed to the wagons in a sequential order, which means it might be necessary for the assembly operator to get to the other side of the wagon. 3. Determine the installation position for the Globehopper Crossmodal based on the mounting guidelines (see below) 4.
Globehopper Crossmodal 3.0 - User Manual EA - Wagon Globehopper Crossmodal FAC - Wagon Globehopper Crossmodal FAL - Wagon Globehopper Crossmodal Simmns Globehopper Crossmodal © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual Sgmmns Globehopper Crossmodal Sdggmrss TWIN Megarailer Globehopper Crossmodal Ua - Wagon Globehopper Crossmodal Za - Wagon Globehopper Crossmodal © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual 6.4 General Recommendations about Globehopper Crossmodal Performance The installation location of the Globehopper Crossmodal is very important for achieving the best performance. The GNSS signal is very sensitive with regards to steel obstructions; therefore, the mounting position should be chosen so that the Globehopper Crossmodal is not affected by such obstructions.
Globehopper Crossmodal 3.0 - User Manual 7 Device Overview Drawing © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual 8 Appendix Certifications and Declarations © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
Globehopper Crossmodal 3.0 - User Manual © 2020 nexxiot.com Doc. Nr.: 20200511001 Version: 1.
