REV. A ECO No. First release APPROVED NAME SIGNATURE NAME DATE SIGNATURE DESCRIPTION: Product Manager R&D Manager FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON Testing Manufacturing Eng. Shay Aharon QA Engineering Shay Aharon SH OF DRAW No. REV.
1 DC00017-001 DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Table of Contents Mechanical Assembly Description ......................................1 Pcb.......................................................................................1 Display..................................................................................1 Main Board With Display.......................................................1 Labels Assemble & Rev / Ver Label ......................................1 Main Board With The Meter ..................................................
Mechanical Assembly Description FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. In order to comply with FCC RF Exposure requirements, the AMR unit must be installed in such a way that there is a 20 c”m separation distance between it and all persons during normal operation. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Pcb Solder the capacitors and transformer to the main-board at 10 soldering pads. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Display Build the display and use with the holder plastic, lcd and zebra strip. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Main Board With Display Assemble the display on the main board. Labels Assemble & Rev / Ver Label Place Assembly, Rev / Ver and serial number labels on the main board. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Main Board With The Meter Assemble the main board on the meter hold it with the 4 clips. Power Supply Connector Assemble the connector from the meter to main board. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
First Cover Place the cover on the top of meter. ID Labels & Rev / Ver Label Place ID label on the plastic cover marked positions & Rev / Ver label. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.
Last cover Place the last cover on the top of meter. DRAW NO.: DC00017-001 DESCRIPTION: REV FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON B SH.