FCC ID: YSEGO775 GO775 User Manual 1
1 Safety & Notice .......................................................................................................................... 3 2 Your Phone ................................................................................................................................. 4 2.1.1 Keypad function descriptions .............................................................................. 4 2.1.2 Icons (Icon changes without prior NOTICE) ..................................................... 5 2.
5.11.1 Video player ...................................................................................................... 15 5.12 Messaging ...................................................................................................................... 16 5.12.1 Send SMS ......................................................................................................... 16 5.12.2 Send MMS .........................................................................................................
Switch the device off when near mobile phone use is not allowed or when it may cause interference or danger such as near the fuel tanks, chemicals, Aircraft or blasting areas. Keep the device away from the children. While driving please obey local laws and regulations with regard to use of the device., .always keep your hands free to operate the vehicle while driving, road safety comes first. Non-original accessories and components are not provided with repair warranty qualification.
Power key Home key Shutdown state, long press this button boot Power on and the standby mode, long press to open the phone options menu. Through these menus, you can be enabled Silent mode, Airplane mode, Reboot, you can also choose Power off. Power on and the standby mode, short press to switch the phone to sleep mode; Sleep mode, short press the wake-up phone. From any interface to return to home page. Long press to open recently used programs list. Menu key Pop-up menu options.
Music playing USB connected Startup alarm Earphone connect New MMS New SMS Talking On Get Started ! Important: This device is designed to be used with a SIM card, use of incompatible SIM cards may result in the device not working and could cause damage to the device or SIM card. Make sure the phone is properly switched off when removing battery and inserting the SIM 2.2 2.2.1 Battery Remove and install of the Battery.
② Put the battery cover on. Warning: Do not connect any external electric power directly to the battery, this may result battery explosion and cause injury 2.2.2 Battery charging Plug the charger connector with the phone, and plug the charger into the electrical outlet.
When you need to remove the SIM card, please first turn off the phone, remove the battery, then remove the SIM card. 2.3.3 Insertion of the Memory Card It is recommended to use external memory card in order to have better performance of this Device Turn off the phone; remove the battery and unplug other external power sources. Insert the T-FLASH card to the T-FLASH trough. When you need to remove T-Flash card, please first turn off the phone, remove the battery, then remove the memory card.
enter standby interface. 2.3.5 SIM card unlock In order to lock SIM lock your phone go to settings > SIM> etc>ETC> etc 2.4 Screen control You can through the screen of a series of operations to control your phone. Click: you can choose the screen by clicking on the screen of the project, and the open application, use the buttons below the screen input. Sliding: you can pass on the screen horizontal or vertical sliding, realize the pages up and down, or displayed around.
desired content. 2.5.1 The extension of home page interface Extension of the interface is used to store more shortcuts, widgets or folders. You can interface extension of the horizontal sliding screen to open the home screen. 2.5.2 Manage Apps Can View, force stop,Install,Uninstall,Clear data,move apps all over the SD card and Phone 2.5.3 Remove apps Long press to remove the app until the top of the screen "Remove" icon. The show will be a drag to "Delete" can be deleted. 3 Function Menu 3.
3.3 WLAN Wireless Local Area Network (WLAN) links two or more devices using some wireless distribution method and providing a connection through an access point to the wider internet. NOTICE: The WLAN signal coverage distance is about 100 meters and will depend on the quantity, infrastructure, and other signals penetrate the object and decide. 3.3.1 Open the WLAN and connect to a wireless network 1. Press the Home key, click on “ ” -> Settings-> Wi-Fi. 2. Select and open Wi-Fi.
Unless you choose not to save network, or the next mobile phone to connect to previously had connected encryption wireless network, will not have to enter a password accordingly. The network will search by WLAN, also is the mobile phone does not need to perform additional steps can be connected to the WLAN network. 3.4 3.4.1 Bluetooth Turn on Bluetooth 1. Press the Home key, click on “ ” -> Settings. 2. Click on “Bluetooth” to open Bluetooth. After open, the status bar will appear Bluetooth ( ).
5.1 Backup and Restore Can backup and Restore you personal data and App to SD Card, Can Restore to the phone; 5.2 Browser Through a web browser, you can connect to the internet, Internet settings are default to MTN SIM card. 5.2.1 Open Browser Touch Brower can open the browser. Interface as shown in the diagram: In the browser, you can open the page by the following methods: 1. Click on the browser address bar, input for the open web site. Click. 2.
4. Click “ 5.5.2 ” return to camera interface. Video recorder The mobile-phone supports shoot function, the extent of film restrict according as current memory space. 5.5.2.1 Recorder 1. During the view-finding mode, adjust the lens to allow what is being photographed to appear in the viewfinder. 2. Press” “ to recorder. 3. Press “ ” end recorder. Complete recorder, you can click on the icon of the right, in the menu for the following in operation: 1. Click delete, you can delete the video. 2.
Account settings You can change E-mail account Settings, such as name, email address and password and specifications. Email notification and ring Settings Set the notification of email and select the ring settings. E-mail inspection frequency Settings Enter the optional settings of the E-mail checking frequency. 5.9 File manager In the main menu click on file management can enter to file management list, memory card shows all of the file.
5.12 Messaging Click on the messaging, you can pass the messaging function sending or receiving SMS and MMS. 5.12.1 Send SMS 1. Messaging ->Click the icon “ ” to Compose new message. 2. In the recipient field, enter the recipient number. You can also click “ ” Select recipients from your contacts. 3. Click on a column of input, enter the message content. 4. Click send. 5. Select SIM card. 5.12.2 Send MMS 1. Messaging ->Compose new message. 2. In the recipient field, enter the recipient number.
4. Can use your headset or car kit to receive call. 5.14 Contacts You can store phone numbers on your phone’s memory. This menu gives you quick and easy access to the people you want to search. You can view and create contacts on your phone, and can also import contacts stored on your SIM card. To access this menu, press HOME, and touch the application tab, and then select People. You can also press the People icon in the home screen and select the Contacts tab. 5.15 Music 5.15.
5.15.6 Set music use as ringtone 1. Open the music. 2. Choose songs/play list tag page. 3. The music files to choose and long press until pop-up shortcut menu. 4. Click used as phone ringtone. 5.15.7 Set sound effects 1. Open the music. 2. Press the menu button-> sound effects. 3. Tick enable sound, choose to enable the sound effects and checked open. 5.16 Sound recorder The sound recorder is a simple recording tool that provides all of the required functionalities for you to manage voice files.
Bluetooth settings: Management connection, setting device name and can detect the sex, etc. 5.17.4 Data usage Measured by your phone,Your carrier’s data usage according may differ; 5.17.5 More Airplane mode: Disable all wireless connection. VPN settings: Setup and manage virtual private network. Tethering & portable hotspot: Will you move data connection through cell phone USB or as a portable WLAN hot share. Wi-Fi Direct settings: Set up and management WLAN Direct.
Manage applications: Management and delete installation applications. Running services: Check and control the currently running services. Storage use: Check the application of storage space. 5.17.11 Security You can configure settings that help secure your phone and its data. 5.17.12 Location services Use wireless network: The use of mobile network in application check position. Use GPS satellites: Accurate location to street level.
5.17.17 Accessibility Accessibility: set Open/close. Power button ends call: Press power key words will end the call, not shut down the screen. Quick boot: set Open/close. 5.17.18 About phone System updates Status: Check the current state of the mobile phone. About battery: View power consumption situation Legal information: check the open source license About version: Display model. 5.
Some calling regions have poor lines. better. Standby time is related to the network system. Please temporarily turn off your Smart Phone, as you are located in an area with poor reception. Batteries need to be replaced Replace the batteries When you cannot get a signal, the phone will continue to transmit in order to find a base station, thereby expending large amounts of electricity will cause the standby time to decrease.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.