Wireless Network Video Recorder System User Manual 2PCS/4PCS/6PCS/8PCS 720P/960P/1080P 2CH/4CH/6CH/8CH NVR Kits V.
Package Contents Thank you for choosing Smonet product. Here is the list for product and relevant accessories. S/N Item Quantity 1 NVR 1pc 2 IP Camera(2CH/4CH/6CH/8CH) 2/4/6/8 pcs 3 DC 12V/2A power supply(for NVR)-3.3 feet 1pc 4 DC 12V/1A power supply(for IPC2CH/4CH/6CH/8CH)-10 feet 2/4/6/8 pcs 5 3.
1 Installing your Network Video Recorder System Getting Started Before you begin installation, be sure to have the following: PC or TV monitor VGA or HDMI cable Router (WAN) Hard drive.If you purchased the system without hard drive, you must first install it. If you do not have a hard drive, you will not be able to record and playback video. Please see below for hard drive installation instructions Do not attempt to install your cameras until you are able to view images on your TV or PC monitor first.
Installing the System Connect the NVR and cameras with power adapters provided. Attach the anten nas to the cameras, connect the mouse to the NVR. (Please note, power supply for NVR box is 12V-2A) Connect the PC or TV monitor to the NVR with a VGA or HDMI cable. You must use a PC or TV monitor, you cannot connect to a laptop. Connect the Router LAN Port to NVR WAN Port with Network Cable Provided. The router must be WAN(Wide Area Network).
2 Check NVR Network , Change NVR system login password Once you have completed connecting the NVR, wait approximately 2-3 minutes. Next you will see the window below on your monitor screen. Password is NOT required, click OK to continue. Right click on the home screen of your monitor, navigate to Main Menu > Network. Select DHCP Enable as shown in the figure below and click ok. Then click Netservice to check if the Cloud status shows connected.
Once you power up, repeat the steps outlined as above. Cloud status must be Connected. If this does not happen, you will not be able to view remotely. After you log in, click System>Account>Modify Pwd to setup your own password. Old password is blank, create a password and type it in the field, repeat new password, click ok. Be sure to remember your password.
3 Viewing on your SmartPhone From your Smartphone, go to the App store or Google Play, download “XMEye”. Register an account by your email. Be sure to remember your account login info.#Pic 1 Click "+"(#Pic2), then click that little QR code(#Pic3),right click your mouse on the monitor screen>Main Menu>Advanced>Version>scan the QR code of the Seria No(#Pic4),input your username and password,then click ok to add the device.
4 Viewing your system on your computer or laptop by CMS software If you need to view the video on your computer or laptop,please send email to nextrendservice18@hotmail.com by your personal email and tell us your computer type(Windows or Mac)and we’ll send it to you. E-mail Subject: Request CMS software for MAC OS system or Window system. Install CMS software first.
Click the zone you have added>Add device>input the name>Select Cloud Then go to your monitor of the camera system and right click the mouse>Main Menu>Advanced>Version>Find the serial number and input it to the CMS . Username is NVR system user name on your home monitor screen.(If you don’t change it in your setup, it should be admin) Password is your NVR system password on your home monitor screen.
5 Record Video. Here is an easy way to set the recording function if you need record 24 hours everyday: TYPE 1 : Manual Record Right click on the home screen of your monitor, navigate to Record Mode> select schedule all or manual all > click ok. Once you have completed setting up the recording function, you will see a little white box in the bottom right corner of each video. This indicates the system is recording. Here is another alternative way to set the recording.
6 Playback Video. To use the playback feature, you must first set up the recording function as described in the section above. To playback, from the home screen of your monitor, right click and navigate to Playback > select the date and the channel you wanna playback and click the play icon, then you can move the mouse to select the time on bottom of this window that you wanna playback .
Q:Do I need to connect the camera with network cable? A:No, the cameras are wireless. But you need to connect the camera with a power supply. The cameras and NVR are already paired. The camera will connect with the NVR automatically once attached to a power supply. No Internet(Not connect NVR box to router): You can view the live video, record and playback in local place.
After you have finished setting your preferred channel as outlined above, repeat the process for your remaining preferred channels. Click OK.You can adjust the sensitivity at any time by returning to this screen.When people passed by,you will get motion detection signal and notification.
Q:How do I use a USB to Back-up my data? A: You need to make sure you have recorded video in your hard driver first,then you need to insert USB storage on the back of the NVR. From the home screen of your monitor, navigate to Main Menu>System>Back up>click Detect to check if you can find the information of the USB.
If not working, please send an Email to nextrendservice18@hotmail.com for the tech support. Q:What is best temperature for the cameras to operate at their optimum level? A: Select a location for the camera that has an ambient temperature ranging from -50 degrees Fahrenheit to 122 degrees Fahrenheit. Q:How do restore my unit to the Factory Settings? A: Right click the mouse from the home screen of your monitor, navigate to Main Menu> Advanced > Restore, click all, click OK.
Q:How do I reset the NVR login password? A: To protect your privacy, please send an Email to nextrendservice18@hotmail.com, Email subject: Request Password Reset.
How can I get product and technical support? US Toll Free:1-888-996-8783 (Available after 5:00 PM at Pacific Time) Email:nextrendservice18@hotmail.com 16 V.