User's Manual

www.cel-.com
Cel-Fi GO X is optimized for stationary
applications such as buildings, factories,
warehouses, and similar. It features 100dB
of system gain and provides the largest
cellular coverage footprint in its category.
Basic Functionality
The Cel-Fi GO X connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The Cel-Fi GO X Smart
Signal Booster nds the appropriate cellular signal, per the product’s
conguration, improves the signal, and amplies it. Improved service
is provided to the user via the Server Antenna.
Note: A Mobile version (“GO M”) of the product is available. Go to
cel‑.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app’s dashboard shows the system “Boost” value. A numeric
representation mapped to the amount of Signal Gain the system is
providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO X
Your Cel-Fi GO X will automatically select the strongest cellular
signal to boost. However, you may manually congure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO X with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO X is NEMA 4 rated, and can be used both indoors and
outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
Cel-Fi GO X
Quick Start Guide
Smart Signal Booster
™
qsg_GO-X-Eng_17-0309
LED MEANING
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.
Cel-Fi GO X features an LED on the top face to indicate the
unit’s state:
ISSUE MEANING ACTION
Continual Blinking
GREEN
Unit is operational,
but not attaching to a
network to boost.
• Make sure both antennas are connected
properly and are appropriate for the
desired frequencies to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
Troubleshooting
User Interface
IN THE BOX
* Other variations of the product package may include
additional internal and external antennas or components.
Main Unit Power Supply
The following antennas are authorized to be used with Cel-Fi GO X
Smart Signal Booster:
Antenna Kitting
MODEL DESCRIPTION FREQUENCY
A32-V32-100
Wideband Panel Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3 3
MODEL DESCRIPTION FREQUENCY
A32-V24-100
Wideband
Directional Antenna
698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3 3
MODEL DESCRIPTION FREQUENCY
A21-V33-100
Whip Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3 3
MODEL DESCRIPTION FREQUENCY
A11-V43-100
Indoor Omni Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
Additional Cel-Fi Antenna options are available at www.cel-.com/antennas
Cel-Fi GO M Smart Signal Booster